This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Messages - Badger
2521
« on: July 30, 2016, 11:50:54 AM »
Stock HW
BO3, Combat Arena, hazards off
No BFE, Hax, AAM etc etc
No HS/popups/SNS unless part of a hybrid
Hi5er to host (cheers man)
GL to RedAce :D
2522
« on: July 30, 2016, 11:49:35 AM »
Need a host for a Stock HW title match between RedAce and I.
I can when you're ready mate if you like?
Sweet, thanks a ton.
2523
« on: July 30, 2016, 10:30:09 AM »
Stop using your phone to record the screen man, use bandicam or something.
2524
« on: July 30, 2016, 09:57:52 AM »
Need a host for a Stock HW title match between RedAce and I.
2525
« on: July 30, 2016, 07:34:59 AM »
Update: Just installed the replacement board, we good.
2526
« on: July 29, 2016, 07:37:16 PM »
ye you didnt spend 25 hours sitting at your PC trying to stack :P
2527
« on: July 29, 2016, 04:39:52 PM »
Oh man that is so cool looking. Are the wedges any good? When I tried making a popup off a snapper the wedges were beyond terrible (couldn't get under a box chassis) and it was super havoky.
Also, why DDTs for wedges? I thought Snapper2s made the best wedges?
2528
« on: July 29, 2016, 04:36:05 PM »
Great to see apanx posting more! The first 2 BFE bots are interesting, are they BFE'd to weight more or do they contain a ton of components?
2529
« on: July 29, 2016, 09:20:00 AM »
Why do you make all of your bots underweight? Do you do it on purpose?
2530
« on: July 29, 2016, 09:14:49 AM »
They're there - the game has tags for robots based on which version of the game it was built in. v1.0.0.2 being the latest, of course.
How do you view them?
Like I mentioned before, it doesn't look like I'm able to see it via the steam shop page or the general steam workshop page.
You'd need to download them ingame. Steam workshop doesn't allow online downloads, it's all via the game client.
2531
« on: July 29, 2016, 09:14:02 AM »
@R01
Both the iGPU and GPU output no video, which is why I found this strange. With the help of a tech support IRC room (the last place I thought I would go for tech support advice) I managed to basically confirm it was a motherboard issue. I was worried that I'd have to go through Gigabyte's 1 month RMA process, but since I bought it off Amazon they're sending me a replacement within 48 hours no questions asked, which is super cool, especially as I started the support chat at 11:30pm.
Bad news is I can't work on People's Choice until then. Much better result than I was expecting though.
Alright, it seemed odd that you wouldn't get any output in the BIOS(a quick search showed that sometimes removing and putting the ram back in as well as holding the power button for a few seconds when the pc was completely unplugged, fixed the issue) which made me guess it was hardware, but still good to try out the software things first.
Good to hear that you're getting a replacement that fast. Would you usually have to fill out all details of what happened when and have Gigabyte analyze the stuff if it wasn't bough off Amazon?
As someone who works in IT and has helped others I try to get all the important info first as it quickly allows to see where the problem could be and if someone had the problem before, so many issues have happened to many people before that finding a possible solution isn't too difficult.
Yeah, cleared the CMOS at least 10 times via 3 methods, removed and replaced all manner of ram sticks. Very odd how it booted to windows fine despite the hardware failure. I'm assuming it was the mobo, I'll find out tomorrow :D Apparently Gigabyte's UK RMAs are really good, they only need the serial number, no proof of purchase needed. Going thru amazon is so much quicker and easier though, they don't even check if the item is actually damaged.
2532
« on: July 28, 2016, 05:53:30 PM »
Don't the beefier axles in ironforge fix this to a degree?
What's ironforge? And yeah, I did see beefier axles, so maybe I should try those.
A mod like DSL
2533
« on: July 28, 2016, 05:38:08 PM »
@R01
Both the iGPU and GPU output no video, which is why I found this strange. With the help of a tech support IRC room (the last place I thought I would go for tech support advice) I managed to basically confirm it was a motherboard issue. I was worried that I'd have to go through Gigabyte's 1 month RMA process, but since I bought it off Amazon they're sending me a replacement within 48 hours no questions asked, which is super cool, especially as I started the support chat at 11:30pm.
Bad news is I can't work on People's Choice until then. Much better result than I was expecting though.
2534
« on: July 28, 2016, 03:18:04 PM »
I thought it was a mobo issue too, but I assumed that if it was the motherboard, it wouldn't boot to windows at all.
2535
« on: July 28, 2016, 02:53:02 PM »
Copy/paste for a homshardware post
My PC is not outputting any video, either through the motherboard or the GPU outputs, to my monitor or a TV, Displayport or HDMI. It is definitely booting fine, as I can hear the windows login screen sound, but I cannot get any video output, not even in the BIOS.
The problem occurred when I tried to change my monitor's refresh rate from 144hz to 60hz in the hopes of fixing a visual bug (which I've encountered many times before, I usually just restart to fix it.). When I boot, my monitor wakes from sleep, and my TV autoswitches to the HDMI input, as thought they are getting a signal, but on both a "No signal" error is displayed.
My GPU is a 970 and I'm on windows 10, if that matters. What steps can I go through to try to fix this? Yes, I've tried restarting multiple times.
Will give prize to whoever manages to fix it.
2536
« on: July 27, 2016, 11:02:54 PM »
 Updated slightly. Cookie to anyone who can name all the icons.
2537
« on: July 27, 2016, 10:26:11 PM »
It's certainly possible. I'm not sure how to do it myself, but I'm sure one of the more experienced members will give you a hand!
2538
« on: July 27, 2016, 07:26:35 PM »
Just a nitpick here, but your splash (the 20mb one) wouldn't be so yuge if you saved it as .jpg instead of .png.
But then the quality would drop a lot.
It's better than not being able to see the splash at all, since my browser crashes whenever I try to open it. 
Which is why I made an imgur album with all of the splashes individually instead :D
2539
« on: July 27, 2016, 03:56:25 PM »
Just a nitpick here, but your splash (the 20mb one) wouldn't be so yuge if you saved it as .jpg instead of .png.
But then the quality would drop a lot.
This
2540
« on: July 27, 2016, 01:00:57 PM »
The first and second yeah, I love how you did the hybrid. Shame they didn't work out.
|
Show Posts