This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Messages - Billy5545
Pages: 1 ... 30 31 32 33 34 35 36 [37] 38 39
721
« on: June 26, 2018, 07:04:17 PM »
And now, Avalanche is totally banned, just to tell you
722
« on: June 25, 2018, 07:23:29 PM »
The bio, lol. Anyway, can you post internal shot for your bot?
Sure! There's not much to it really.
[ Quoting of attachment images from other messages is not allowed ]
Anyway, here's my next bot, also a flipper, also animal themed, and he even has little thingies on his head. Say hello to Demon Cow, a top-hinged flipper, a design inspired by RW competitor The Mule and my lego bot Demon Cow. I was gonna name him Cow Satan, but Demon Cow has a better, funnier ring to it.
[ Quoting of attachment images from other messages is not allowed ]
[ Quoting of attachment images from other messages is not allowed ]
[ Quoting of attachment images from other messages is not allowed ]
His insides are densely packed, and I don't feel like taking him apart, so here's an obscured view of the internals.
[ Quoting of attachment images from other messages is not allowed ]
Here's his bio:
"Legendary flipper Demon Cow returns from retirement to claim another championship. But has his design aged well? Notorious for out of the arena flips and attacking the house robots, even flipping the mighty Mr. Massacre, the boss of the house robots, this bot is definitely championship material."
Yes, I said house robots. I'm making a series about robot combat, a story, and it features original house robot designs. I'm not sure how far I will take it. It'll probably start as a webcomic, and then escalate to animation when I go to film school. I aspire to become a story-writer.
I feel like these are genuinely made IRL, in that there's not much effort in making them combat effective. I just have a vision of what each one looks like, and bring it to life in RA2.
Another awesome bot and bio. And do you say that you aspire to become a story writer and made an original story about robot combat. I'm currently writing a robot combat Multiverse crossover Fanfic, where 24 roboteers from fictional universes will fight. I will show you further details and the unfinished Fanfic in a PM
723
« on: June 25, 2018, 06:44:30 PM »
Disapppointing second tournament lost. I should have gone with the large ring because I didn't expect Redacted's ring to be at the right height to reach Ring of Destruction's chassis.
724
« on: June 25, 2018, 05:23:23 AM »
I was gonna make predictions, but dammit, I'm too lazy! I MIGHT win against Billy. 'S really close.
Oh hey! Locked Cage is seeded 3rd. Nice. Dragon Rising should really be seeded higher. I'm calling that Dragon Rising, Ceylon, or Locked Cage takes this tournament.
How much does your disc weight? And what disc do you use?
100cm disc with spokes. The ring itself is Steel and the filler is Al. I dont remember how much it weighs, but it's probably more than yours.
Does that mean your bot is smaller by half than my bot, considering the small ring config is 200 cm solid disc for my bot
725
« on: June 25, 2018, 04:49:00 AM »
I was gonna make predictions, but dammit, I'm too lazy! I MIGHT win against Billy. 'S really close.
Oh hey! Locked Cage is seeded 3rd. Nice. Dragon Rising should really be seeded higher. I'm calling that Dragon Rising, Ceylon, or Locked Cage takes this tournament.
How much does your disc weight? And what disc do you use?
726
« on: June 24, 2018, 11:08:49 PM »
He probably used RA2CF for everything, but tried to build it in a 'legal' way.
@superbot, you should try doing it legit, at the least so you can get an idea of what is possible and what isn't. Plus the techniques used are pretty useful in RA2 in general, even for DSL/IRL building.
Yeah, like learn how to glitch like using snapper loading and eFFe, as well as others Also, on an unrelated note, learn how to BFE too for DSL IRL
727
« on: June 24, 2018, 10:58:52 PM »
My predictions: - I'm not sure if Moziet's or my ring spinner will win, but since I selected the shorter ring choice, this will give my bot and Moziet's equal weaponry. However, I'm not sure if my ring or Moziet's is slower, given I used solid 200cm disc and Moziet's, while I don't know if it's the hollow or not, also has extenders and LED's to it. Maybe my bot will win, seeing I don't have extra weight in my ring and thus, faster ring
- The avengers have a large advantage against Hammerblade, being a multibot. I'm predicting that Philippa will choose the avengers that counter Hammerblade's VS, winning the fight
- Guts 2.0 will most likely win, seeing that it is an undercutter, while Anti Gravity is a flipper, though it depends if Guts is able to rip Anti Gravity's panel first, or if Guts get launched OOTA by Anti Gravity
- Red is a hammer spinner hybrid, while Tidal Wave is a shell spinner. I think Tidal Wave will win, seeing it has more teeth, and Red's nature as a hammer spinner hybrid will mean that a hit to Tidal Wave while it spins might send Red flying, allowing Tidal Wave to attack it easily
- Cyber Wolf is a spinner/Flipper clusterbot, while Mk801 is an Icewave style HS with a three point bar spinner. I think Mk801 will be too high to attack Cyber Wolf, and the only way to attack is by waiting for the Cyber Wolves to drive up the wedge into the bar's path. It will be especially easy to attack the spinner one, seeing it is pretty fast. Again, I don't know, but it seems that Mk801 will have a higher chance of winning
- I think Wheels n Stuff will have a difficulty fighting Strafe and Strike 3,seeing the plow at the front will make it very difficult for Wheels n Stuff to wedge and flip Strafe and Strike. It will instead be hammered by Strafe and Strike, allowing it to win
- Gyroscope Blade, having no wedge, probably will be able to attack Humanity It's mask easily, to reach the chassis, thought it depends if Gyroscope Blade gets axed by Humanity II before reaching the chassis, which will damage Gyroscope Blade and maybe cause it to unbalance, costing it opportunity as it rolls on it's weapon, while Humanity II will be able to get free strikes on it. That's it unless Humanity II strikes the spinner, which will send both Humanity II and Gyroscope Blade flying. Again, it's difficult to predict. Maybe Humanity II will win if it hits right on time.
- I'm predicting that The Unstoppable Mango will most likely go with it's Flipper configuration, to flip Freezerain. It will be able to dominate if it gets under Freezerain's wedge and flip it from there, especially with Freezerain's lack of srimech, though Freezerain might be able with it's bar. Even then, it will give The Unstoppable Mango free opportunity to strike. Again, I'm not sure, but with Freezerain's angled bar and wedge, it might be able to stop the Flipper of Unstoppable Mango and rip it, allowing it to win
- TerrorTron has a bar, while Ranger has four configurations. I'm predicting that Ranger might go for the Flipper or spinner choice. If Flipper, then TerrorTron might be able to get a hit, then get up on Ranger's Flipper and get flipped, but if spinner, it will depend on Ranger being able to wedge TerrorTron, because the spinner is too high to hit TerrorTron. Again, unsure, but maybe Ranger will win
- Junkyard Crawler and Megalomaniac are both HS's. Given Junkyard Crawler use tracks, while Megalomaniac use four wheels, I think Megalomaniac will be faster and thus, able to cause more damage to Junkyard Crawler. Megalomaniac will win
- Jilted Lover is a Flipper, while Hornet VII is a VS. Given Hornet VII's Nightmare based design, Jilted Lover might be able to get under the spinner, and while taking hits from it, will be able to flip Hornet VII from there. However, Hornet VII can also attack Jilted Lover's side, or maybe reach all the way to the vulnerable top to destroy the Flipper, though seeing the front, it is unlikely. I think that Jilted Lover will win on aggression and control
- I think Very Sadbois, being a HS, will be able to damage and destroy Saturnia, which is a Flipper, especially if it gets to the side of Saturnia and attack the chassis from there. However, Saturnia might be able to get some flips on Very Sadbois. I think Very Sadbois will most likely win by destroying Saturnia.
- I think it will be similar to Hornet VII vs Jilted Lover, seeing Anguish is a VS and Mega Wing a flipper. However, Anguish has a different design than Hornet VII, as is Mega Wing to Jilted Lover. Anguish might have an easier time attacking the flipping panel than Hornet VII. If it reaches judge's decision, Mega Wing will most likely win by control and aggression, if it's flipping panel survives.
- VS fight. I think Infinity gauntlet will get hit by Whamola's disc, seeing it's larger. However, given Infinity Gauntlet has a lower center of gravity, while Whamola has fragile design based on Nightmare, Infinity gauntlet will most likely win, by attacking and tipping Whamola to it's side.
- I think Nexon will have a better chance of attacking Hoodwinker than Hoodwinker is to Nexon. Indeed, the angled disc of Hoodwinker will target Nexon's wedge and chassis, and the teeth of the weapon. Nexon's, on the other hand, targets Hoodwinker's weapon more quickly, seeing the short distance of the teeth compared to Hoodainker's. Nexon will win the fight if it manages to destroy Hoodwinker's disc right on time, leaving Hoodwinker helpless.
- I think Peak IRL will go with it's weaker armor and minibot configuration against H. O. T., seeing it's a Flipper. Peak IRL can win if it it doesn't get out wedged, and flipped by H. O. T.. However, seeing Peak IRL has a minibot, the minibot will most likely get to the Flipper first, sacrificing itself while allowing Peak IRL to have extra time to attack H. O. T.. I think Peak IRL will win
728
« on: June 24, 2018, 09:37:03 PM »
Wow, an ENTIRE year? Eh, I did lose interest in making IRL bots, since there's so many other people who can do better than me.
Regardless, I have a potential future project that I may start working on in the future and that requires a bunch of robots and bios. A potential story I most likely will write and possibly animate as well in a few years when I go to film school.
Here's Blue Moose, basically a knock-off of Toro and RedBull. If Redbull gives you wings, Blue Moose gives you antlers.
INB4 someone makes a Happy Tree Friends Lumpy reference.
[ Quoting of attachment images from other messages is not allowed ]
[ Quoting of attachment images from other messages is not allowed ]
Based off one of my lego robots, but made to be more realistic. And added antlers.
The two ballasts in the back are there to stay, so don't criticize their awkward appearance on his rear end.
I'll be making some more robots.
Here's the "bio" for this one:
"Blue Moose is a young rookie robot and consistently performs like a pro. The team are great sports and it's believed they used real moose antlers on their robot. They're also trying to promote their new energy drink, also called Blue Moose. It gives you energy, AND antlers."
Expect more to come.
The bio, lol. Anyway, can you post internal shot for your bot?
729
« on: June 24, 2018, 06:21:53 AM »
Finally, the tournament starts. I'm hyped up for it
730
« on: June 24, 2018, 04:07:52 AM »
I like the colors.
What are the weapons
It is two discs with a drum attached in the middle, and the drum having four beaters (I think, correct me if I'm wrong though)
731
« on: June 23, 2018, 06:54:27 PM »
[ Quoting of attachment images from other messages is not allowed ]
[ Quoting of attachment images from other messages is not allowed ]
Weapons=4 large beater bars
Armor=3mm aluminum
Is this IRL or not? Also, i feel that the large beaters on the small disc ruins the aesthetic. Though the wedge looks good
This is irl.
Reply to badger: 50-70% of showcases have uncropped images. I have to argue, not editing helps more than hurts the image. It shows the weight of the robot without needing to edit.
Oh my god, stop being so lazy! Just include the weight of the robot in the edited image, ya turkey! 50-70% of showcases have uncropped images, ey? Well, seeing as I'm the one who stores all the images for BOTM, let's see if this is true...
...Aaaaand no. Not even close. In fact, only 21% of images are uncropped, and that's mainly because of the influx of noobs as of late, and because [cringey name goes here] spammed a bunch of uncropped images in Replicas, which he got heavy, HEAVY flak for. In fact, removing [cringey name goes here]'s spammage reduces the number down to a measly 9%, so you ain't fooling nobody with that claim, kid.
No excuse for laziness. Stop being ****ing lazy. You want people to bother giving feedback on your bots? Bother to edit the damn thing.
You win. Next image will be edited. 1 thing, what program would you use?
Not FOTEPX, but as showed on Badger's gif, you can use MS Paint
732
« on: June 23, 2018, 06:25:57 PM »
An arena based on GTM?
I dont know If that would work but
It would be neat
There would be the superbot13 corner, the admin corner, and the old members that recently came back corner. The middle would have the forum logo on it. Obviously superbot’s corner will deal 999999999999 damage.
Just to add to that, how about new members corner too, representing users like me, Moziet, Bildschirm, etc
733
« on: June 23, 2018, 06:24:48 PM »
[ Quoting of attachment images from other messages is not allowed ]
[ Quoting of attachment images from other messages is not allowed ]
Weapons=4 large beater bars
Armor=3mm aluminum
Is this IRL or not? Also, i feel that the large beaters on the small disc ruins the aesthetic. Though the wedge looks good
734
« on: June 22, 2018, 08:07:05 PM »
I know it needs to be a 3d CAD program that can save obj files
You can use Blender, or better, Google Sketchup
735
« on: June 22, 2018, 01:03:17 AM »
I don't know if I'm allowed to bump this or not, but you should post pictures of your bots internals, Evil Toaster. Also, you should press the insert attachment button in the attachments and other options, after choosing the file and posting your post, to post the picture after putting it on attachment
736
« on: June 21, 2018, 10:48:40 PM »
Why is the 37th spot empty? And I'm going to tell you that I won't join this, as I haven't finish my planned bot in time, because of how difficult it is to create something like that
737
« on: June 21, 2018, 07:45:36 PM »
warhead
edit: how do I use image attachment
Press insert attachment for your picture attachment
738
« on: June 21, 2018, 07:30:39 AM »
I sent a message to both Bildschirm and Superbot, asking them to join. Looks like only one of them can enter, or an entirely different player
739
« on: June 20, 2018, 04:22:30 AM »
Perhaps a DSL rebuild of Starcore and Reforge packs bots
740
« on: June 19, 2018, 07:00:41 PM »
How do you make a 4 bar? And why is it called a 4 bar
Remember BioHazard? It's called a 4 bar because it is a lifter that has four bars, which are the supports for the arm that also move it
Pages: 1 ... 30 31 32 33 34 35 36 [37] 38 39
|
Show Posts