Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Topics - Billy5545

Pages: [1]
1
Challenge Board / Billy5545 vs Bildschirm (DQ: All)
« on: December 22, 2018, 05:08:52 PM »
DSL-IRL
HW
Robogames Arena
Bo5
RA2CF, BFE, and OBJRA2 allowed
DSC's IRL Packs, Badnik Recolors, Geese's NPC fixes, etc, are allowed
CB2 components are allowed as long as they are not too abusive
Hammer/axebot only
Hoppin to host

2
Challenge Board / Billy5545 vs Double00rhys (Doubld00rhys Wins)
« on: December 21, 2018, 08:44:20 AM »
DSL-IRL
HW
RW2016 Arena
Bo5
RA2CF, BFE, and OBJRA2 allowed
DSC's IRL Packs, Badnik Recolors, Geese's NPC fixes, etc, are allowed
CB2 components are allowed as long as they are not too abusive (like stronger version of non CB2 components, etc)
First challenge rematch
Bild to host

3
Challenge Board / Billy5545 vs Plerco (DQ: All)
« on: December 20, 2018, 06:28:56 PM »
DSL-IRL
HW
RW2016 Arena
Bo3
RA2CF, BFE, and OBJRA2 allowed
DSC's IRL Packs, Badnik Recolors, Geese's NPC fixes, etc, are allowed
CB2 components are allowed as long as they are not too abusive (like stronger version of non CB2 components, etc)
Drill fight
Hoppin to host

4
Challenge Board / Billy5545 vs Bildschirm (Bildschirm Wins)
« on: November 27, 2018, 10:57:58 PM »
DSL-IRL
HW
Robogames Arena
Bo3
RA2CF, BFE, and OBJRA2 allowed
DSC's IRL Packs, Badnik Recolors, Geese's NPC fixes, etc, are allowed
CB2 components are allowed as long as they are not too abusive (like stronger version of non CB2 components, etc)
Hoppin to host

5
Challenge Board / Billy5545 vs Hoppin [IRL Challenge belt] (Hoppin Wins)
« on: November 27, 2018, 04:31:51 PM »
DSL-IRL
HW
Robogames Arena
Bo5
RA2CF, BFE, and OBJRA2 allowed
DSC's IRL Packs, Badnik Recolors, Geese's NPC fixes, etc, are allowed
CB2 components are allowed as long as they are not too abusive (like stronger version of non CB2 components, etc)
Bildschirm to host

6
Challenge Board / Billy5545 vs Double00rhys (Billy5545 Wins)
« on: November 14, 2018, 05:23:36 AM »
DSL-IRL
HW
RW 2016 Arena
Bo5
RA2CF, BFE, and OBJRA2 allowed
DSC's IRL Packs, Badnik Recolors, Geese's NPC fixes, etc, are allowed
CB2 components are allowed as long as they are not too abusive (like stronger version of non CB2 components, etc)
Bildschirm to host

7
Challenge Board / Billy5545 vs moziet (Moziet Wins)
« on: November 11, 2018, 04:15:38 AM »
DSL-IRL
HW
Robogames Arena
Bo5
RA2CF, BFE, and OBJRA2 allowed
DSC's IRL Packs, Badnik Recolors, Geese's NPC fixes, etc, are allowed
CB2 components are allowed as long as they are not too abusive (like stronger version of non CB2 components, etc)
Overhead bar spinner fight only
Bildschirm to host

8
 DSL-S
HW
Ring Arena
No cb2, BFE, RA2CF, and OBJRA2
Bo5
Hoppin to host

9
Challenge Board / Billy5545 vs Nightraven Shade (Nightraven Shade Wins)
« on: November 06, 2018, 05:51:33 PM »
DSL-IRL
HW
Robot wars 2016 Arena
Bo3
RA2CF, BFE, and OBJRA2 allowed
DSC's IRL Packs, Badnik Recolors, Geese's NPC fixes, etc, are allowed
CB2 components are allowed as long as they are not too abusive (like stronger version of non CB2 components, etc)
Hoppin to host.

10
Challenge Board / Billy5545 vs pokebro14 (pokebro14 Wins)
« on: November 02, 2018, 10:38:10 AM »
DSL-IRL
HW
Robogames Arena
Bo5
RA2CF, BFE, and OBJRA2 allowed
DSC's IRL Packs, Badnik Recolors, Geese's NPC fixes, etc, are allowed
CB2 components are allowed as long as they are not too abusive (like stronger version of non CB2 components, etc)
8bean to host

11
Challenge Board / Billy5545 vs Kix (Kix Wins)
« on: October 31, 2018, 09:49:35 AM »
Also, for rules, are you okay with this Kix:
DSL-IRL
HW
Robot wars 2016 Arena
Bo3
RA2CF, BFE, and OBJRA2 allowed
DSC's IRL Packs, Badnik Recolors, Geese's NPC fixes, etc, are allowed
CB2 components are allowed as long as they are not too abusive (like stronger version of non CB2 components, etc)
Hoppin to host

12
Discussion / GTM Contest Subforum improvement idea
« on: October 16, 2018, 09:04:02 AM »
So, I have an idea on how to improve the contest subforum on GTM to make it more fun for users. After seeing F1krazy doing an Inktober, but for bots instead, and calling it Inktober, and then seeing some people doing it, like Sagaris and Superbomb, it inspired me. Orc's first tourney, Orc's Tourney, as well as Primeval's bet for Destruction Evolution 3, where people will be given real life bots to replicate, but allowed to make it original on the same time by giving their own twist, is also an inspiration on my idea, as I like the concept.

So, back to my idea, basically it is adding new contests that involved bot building. As we all know, the contests subforum is only used for BOTM. So, we should add more contests other than BOTM to make people more interested in building. Users will be allowed to start their own contest and set the period when it will run, with a maximum limit of a month, from thread start and entry receiving, to displaying entries and allowing people to vote on it, and then showing who win and giving award to them if the person who runs it want to, like the bot file of the entrants, for example.

Also, before a user can start a contest, it will have a bit similar requirement to tourneys, like users must have time to host it. Contests then must pass through a mod approval first before it can start. When the entry receiving period ends, the user then must make a special voting thread that shows the bots made by users, before showing the winner of the contest after voting period ends. And I also forget, but users can choose what will the contest be like in premise. Will it accommodate any Meta, or just one. And will it have a particular gimmick or not, like being randomly given a real life bot to replicate but giving original twist to it, or to do a bot building prompt. To accommodate the different gimmicks, it will also be allowed to have voting variation. So like Botober contest style for example, will have the builder itself being voted instead of individual bots and their bots displayed on an image hosting site.

And with that, I am going to finish my idea talk. I hope this idea will be considered good and can make contests better. However, you can also help me refine this idea by suggesting something or pointing out whatever flaw I made when typing this.

13
Challenge Board / Billy5545 vs Nightraven Shade (Nightraven Shade Wins)
« on: October 10, 2018, 07:16:52 AM »
DSL-S
MW
Ring Arena
RA2CF, OBJRA2, CB2, Hax Mode, AAM, and BFE are all banned
Ingame bot lab glitches such as snapper loading and eFFe glitch are allowed, as long as the bot is not designed to take advantage of snapper/servo boosting.
Clusterbots allowed
Bo3
Badger to host

(Note: This challenge is not for the DSL-S belt, but a regular one)

14
Challenge Board / Billy5545 vs Hoppin [IRL Challenge Belt] (Hoppin Wins)
« on: October 04, 2018, 06:02:45 PM »
DSL-IRL
HW
Robogames Arena
Bo3
RA2CF, BFE, and OBJRA2 allowed
DSC's IRL Packs, Badnik Recolors, Geese's NPC fixes, etc, are allowed
CB2 components are allowed as long as they are not too abusive (like stronger version of non CB2 components, etc)
Philippa to host

15
Ironforge TC Showcases / Billy's Ironforge Build and Try
« on: September 08, 2018, 09:04:10 AM »
Welcome to my Ironforge showcase. Like with my Stock showcase, this will only showcase tourney, challenge, and BOTM bots. For my first bot, it's a spinner that can be moved with a servo. It's named Movercut, and it's a LW for Reier's Centauri rental, and challenge belt where it will be slightly modified. The design is meant to allow the driver to smack opponents by moving the spinner hen they are on the side, while having the wedge be on the same location. Unfortunately, at max speed, it becomes janky to drive due to physics, as the spinner jerks around. Also, one ballast is used on the bot. Armor, meanwhile, is 3mm alu

 

 

16
Stock Showcases / Billy's Stock Build and Try
« on: September 08, 2018, 08:27:12 AM »
Welcome to my stock showcase. Since I'm not a fan of stock, I will only post bots that are for tourneys, challenges, and BOTM's. So, here is my first stock HW, entered in Revolution 3, Overpop. It is a HW popup. Though I'm too lazy to improve on it. Will do once I get the motivation to do it, like another tourney.

 

 

 


Also, LW for this month's challenge belt will come soon

17
Tournament Archives / Robot Emperor SBV
« on: July 18, 2018, 05:52:30 AM »
Here is the SBV for Robot Emperor





Awards:
For the champion, they will get the title of Robot Emperor for their bot and guaranteed a free spot in the final of the sequel tourney of Robot Emperor, where the final bot to win the whole matches before will face the champion of the first tourney for the title. Also, for the player, they will receive the Robot Design and AI of the whole competitors.

18
Tournament Archives / Robot Emperor - Signups (Signup closed)
« on: July 14, 2018, 04:54:13 AM »
 

I have ideas to start a tournament. After getting the required programs, I can finally host it. Welcome to Robot Emperor

Rules:
-DSL-IRL HW
-There will be 16 entrants, divided into four groups of four. Each group will have a rumble, with two of the winners being allowed to advance into the main bracket.
-The main bracket will consist of eight robots, seeded based on their past history and performance on the qualifier rumble.
-1 entry per player
-If you cannot AI, I can AI for you. However, it is preferred if you AI your bot yourself
Build rules:
-All bots must incorporate at least one active weapon. For example, a rammer must have a moving weapon, like a stabbing spike, a lifting wedge etc.
-Thwackbots, SnS, and Meltybrain allowed. However, for the former two, they also have to incorporate at least one active weapon, unless if they can move while spinning, where they will be classified as a Meltybrain.
-Servobot is not allowed, unless if you can AI it yourself
-Clusterbots and drones are allowed. However, given the format of the tournament, be warned that during the qualifier rumble, only one of the clusterbot’s component can be entered. You can also enter a The Swarm style bot, but only two of the bots can enter per battle.
-Swiss army bots allowed, with unlimited amount of modularity, including major ones, like changing an entire weapon, or minor ones, like an attachment to help in a fight against a specific bot type. However, you must send me a message about what config do you want to use within 24 hours. If the 24 hours time runs up, then I will just use the original config.
-Walkers and shufflers allowed, with 100% and 50% weight bonus for them, respectively. However, that weight must only go to the propulsion system, and not any other, like armor, weapon, batteries, and  motors. Also, if you want to enter one, you must AI it yourself too, or it won’t be allowed to compete
-Geese NPC motors are fine. Madiaba smartzones are fine. DSC’s - IRL packs are also fine. CB2 components are also fine, as long as they are not abused too much, like using stronger version of non CB2 components, using the invisible motor, too much OP components, etc
-RA2CF, BFE, OBJRA2, and other tools or stuffs (like component skinning, though you have to send me the custom skin file too for that) to help with making IRL bots allowed
-Mechavore, Microvore, Minion, and Mini Minion disc is allowed. However, for those discs, and CB2 replica discs, there is a limit of one disc, and no mix and matching between discs.
-Eternalflame.py is banned
-Don’t be a tryhard and send one bot like that
Battle rules:
-Arena is the 2016 Robot Wars Arena
-Battles will be 3 minutes long
-Battles with Havok will be rerecorded. If I already recorded it three times after the original Havok’ed, and all of them end in Havok, then I will use the one with the mildest Havok.
-Robots that get immobilized (either by losing more than 50% of a clusterbot’s total weight, or losing mobility, which will be defined as controlled movement) will be counted out. In the event that the in game counter did not appear due to game limitation (like a bot considered moving, but uncontrolled, and being harassed by opponents), then I will start countdown manually, starting from 5 seconds after I detected no mobility.
-If 3 minutes passed without a KO, then a Judge’s decision will happen. There will be three categories to be scored for, with 35 points per bot:
Damage: 3 x (1-5)
Agression: 2 x (1-5)
Control: 2 x (1-5)

Accepted
Rejected

19
Creativity Showcase / Billy's Creative Showcase
« on: July 10, 2018, 09:18:54 AM »
Welcome to my IRL creative showcase. After seeing the CAD thread, I wanted to make on for myself. However, I then decided to make one for any creative things I done. So here it is. It is for any pictures, drawings, writings, CAD's, etc made by me. So, to start, I will show my two bot CAD's

1. (No name yet)

My first ever CAD of a bot, it was made four months ago, with Blender. It is 4WD, and equipped with lifting forks, as well as a small VS on the top and rear wedge. It underwent few changes, like lowering the ground clearance, making the forks wedged, and adding two teeth to the VS, but otherwise, it remained the same. I will fix the bot later though, after people pointed what's wrong with it
 

 


2. Vertical Rampage

My second bot CAD, and the first made with Tinkercad. It was made just a couple of days ago. It is a 4WD HW VS, with quick speed, maneuverability, and powerful weapon. However, it trades armor because of that.
 

 

20
DSL TC Showcases / Billy's DSL Showcase Build and Try
« on: May 12, 2018, 08:00:51 AM »
Welcome to my showcase. As you know, I'm still a newbie (I have just owned stock since 1 May and downloaded DSL and Ironforge this week, on Wednesday.) At this point, I have built few robots on all three versions together (not sure with stock and DSL, but still few, while one for Ironforge).

Anyway, back to my DSL showcase, this will show what I build on DSL. First up, a vertical spinner that I talked about yesterday on Discord, Vert Shredder. You can find pictures of it externally and internally on the attachments below. It is a heavyweight, with a Perm powering the vertical disc.

The second is a flipper named Flipper Time. It is another heavyweight, this time powered by a beta motor for it's flipper, and using flipping segments and a snow plow to form the flipper. It also has two wheel drive. You can also find the pictures of Flipper Time's external and internals below, on the attachments

That's what I can show for now. Any suggestions to improve both will be appreciated, and I'm aware of it's flaws, like the exposed motor of Vert Shredder, so please tell me how to fix that

Pages: [1]