This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Messages - Hoppin
Pages: 1 ... 91 92 93 94 95 96 97 [98] 99 100 101
1941
« on: March 26, 2017, 06:33:02 PM »
That looks really nice actually. Could benefit from DSCs IRL extender packs, and BFEing the axe to swing 180 degrees, but the core design is solid.
How wiuld i bfe the axe though, i cant find anything that tells me how to do it
1942
« on: March 26, 2017, 05:29:27 PM »
Ok so I've upgraded my axe bot (Droid) reshaping the chassis, adding a spinner killer wedge and some balance wedges on the back, still need to bfe the axe, don't know how. Oh, and there's a paint job. Outer 1:  Outer 2:  Inner: 
1943
« on: March 26, 2017, 09:02:39 AM »
Ok so I've made this axe bot, I still need to bfe the axe to be 180' but idk how and the armour is pl10 Outer:  Inner: 
1944
« on: March 05, 2017, 07:21:24 AM »
Ok, so my bot is meant to have symmetrical sides but it doesn't this stops me from putting in motors. Help please? 
1945
« on: March 04, 2017, 05:36:49 PM »
Hey, ok so that is a bit rushed and I'll need to fix it up a bit as far as lining the wheels up. Im not sure if I can use the skirts for the dustpan for irl. Outer  Inner 
1946
« on: March 03, 2017, 06:42:28 PM »
Double upload I, my bad. This is the first VS i've madae in DSL it's Pl10 CW. Outer  Inner 
1947
« on: March 03, 2017, 06:20:02 PM »
no more comments? :I here have this i guess
(Image removed from quote.)
yes its Dont Steal Kids Its Bad but better
(Image removed from quote.)
used to be ALU 5 but now its ST 3 ;_; its better now i guess? weight 397
I really like the spinning hammer setup, like SOW, but my concern for it is the battery life, I looks like you could downgrade the drive and add another battery or 2.
1948
« on: March 03, 2017, 05:28:59 PM »
Ok so did some upgrading, changed up the flipper and improved the burst motor. Though would like to do a similar flipper style to the one previously but don't know how to make it effective at getting under stuff. Outer  Inner 
1949
« on: February 22, 2017, 06:00:56 PM »
So this is my flipper bot, unnamed, it drives well but my issue is the flipper shape and durability, I also need to add more weight to the bot but am unsure how. Bot outer:  Bot Inner: 
1950
« on: February 10, 2017, 06:44:54 PM »
Nyaaaaah! Titan's blueprints lost due to virus randomly deleting my sh**, it's getting irritating. Anyway, made this little dustpan-esque wedge/VS/sawbot thing:
(Image removed from quote.)
(Image removed from quote.)
Fairly effective against rammers and spinning stuff but fails miserably against, well, everything else. Any idea on how i could improve the design?
Armor is Titanium 5mm, and a ramplate for butt protection~
# I really like the look of this, though I recommend having some wheel guards, also moving the wheels further back so it can roll back over using the discs and I think the motors might need some protection. But overall it's a good concept just needs refining. Hope this helps 
1951
« on: February 10, 2017, 06:36:53 PM »
You'd should be fine with only one black battery, then use the weight elsewhere.
I'd personally go with two red batteries just to be on the safe side. That still saves you 10kg,which should give you enough leftover weight to swap those small teeth for two large Typhoon teeth. They'd last longer, deal more damage, and have a slightly better reach. It's a very neat and tidy design, though! I like it. Could possibly use a proper skin as well, though.
Updated it, to have the typhoon teeth, changed the batteries to red and gave it a paint job + I've made a CW version (though underweight). Sweep 2.1 Outer:  Sweep 2.1 Inner:  CW Version:  
1952
« on: February 08, 2017, 06:32:48 PM »
This is my bot Sweep 2, it's a MW HS with pl10 Sweep 2 outer:  Sweep 2 inner: 
1953
« on: January 31, 2017, 07:15:11 AM »
4 ants? Things could get tight with flips and self righting from my experience. Also, what are you using for your flipper arm?
The ant bats seem to do ok, and the arm is made from Ti extenders and Ti wedge
1954
« on: January 30, 2017, 12:40:19 PM »
Hi memers... This is a arm flipper LW named SK uses Ti 3. SK Outer:  SK Inner 1:  SK Inner 2:  Feedback appreciated.... skrt
1955
« on: January 10, 2017, 01:22:21 PM »
Use 140cm square extenders. You are wasting dozens of KGs on your stilts.
I didn't realize they were that light. Okay, thanks for the advice, I'll go rerebuild it. I'm gonna have a lot of spare weight to play around with and no idea what to do with it...
You could add a second HP for another tribar, using a servo motor or snapper to put it in position
1956
« on: January 10, 2017, 12:47:58 PM »
3rd redesign and using RA2CF, Skyline,
Outer
Inner 1
Inner 2
15kg off but idk what to do with it
Edit: change ti wedge to steel and added 2 ti angle connectors, new weight: 586.3
Make it a bit less than 600KG (idk how) and it will be CW. BTW what armor?
Pl 10
And it's under 600kg
Try Titanium 5. It's literally 1 armor above Plastic 10
It's now 592 so seem to be good, thanks
1957
« on: January 10, 2017, 12:44:57 PM »
3rd redesign and using RA2CF, Skyline,
Outer
Inner 1
Inner 2
15kg off but idk what to do with it
Edit: change ti wedge to steel and added 2 ti angle connectors, new weight: 586.3
Make it a bit less than 600KG (idk how) and it will be CW. BTW what armor?
Pl 10 I might add some polycarb around the sides or something
1958
« on: January 10, 2017, 12:17:45 PM »
3rd redesign and using RA2CF, Skyline, Outer  Inner 1  Inner 2  15kg off but idk what to do with it Edit: change ti wedge to steel and added 2 ti angle connectors, new weight: 586.3
1959
« on: January 10, 2017, 10:31:07 AM »
I've redesigned it to make it a CW, and it's a lot better. I have space left to add panels and wedges etc Inner 1:  Inner 2:  Outer:  If you need help with RA2CF post a thread up in Technical Support, they should be able to help you get it working.
As for the bot itself, attach some armor on the sides. Also, install ra2cf, so you can make more intricate armor plating that surrounds the robot.
I definatley will, but I need to find where to download it Side note: It now weighs 574.1 because it crashed, I had to redo it and had m,ade the chassis a bit to high  
1960
« on: January 09, 2017, 05:29:19 PM »
So I've made this plow flipper, unfortunatly I don't know how to RA2CF or what it is  but this is my best so far.  Pl 10
Pages: 1 ... 91 92 93 94 95 96 97 [98] 99 100 101
|
Show Posts