This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Messages - Hoppin
Pages: 1 ... 90 91 92 93 94 95 96 [97] 98 99 100 101
1921
« on: June 03, 2017, 02:49:19 PM »
New bot, overhead bar spinner. Ti 3 Condoro 2: Outer  Inner 
1922
« on: May 19, 2017, 01:59:49 PM »
Ok so like 2 bots. LW rammer & MW clamp. Both Pl10 Bulleel: Outer:  Inner:  Clamp Bot: Outer:  Inner: 
1923
« on: May 07, 2017, 05:56:07 PM »
Ok so tombclone yea k. Pl10 Inner  Outer:  Oh and I've added a bar version of Snowstorm (Photo now in) 
1924
« on: May 03, 2017, 11:29:02 AM »
I made this yesterday, just posting today. Pl10 K2 Outer:  K2 Inner: 
1925
« on: May 02, 2017, 11:51:44 AM »
Ok so.... Jawbreaker copy with the name of a series 3 rw bot. Pl 10 Crocodilotron Outer:  Crocodilotron Inner: 
1926
« on: May 01, 2017, 12:57:12 PM »
Ok, new bot. MW axe-bot, Jonbra. Still can't bfe axes to save my life though but still does the job (Note, it uses a heavy spike instead of the previous Iron spike) Outer:  Inner: 
1927
« on: April 25, 2017, 04:03:16 PM »
Just wait. I am going to make a thread about BFE ing the burst.
nah
The thread is in technicaal support. I think i need to make as it needs to be in tips and tutorials
I'd tried it before and got it wrong, so idk what to do about it, also some feedback on snowstorm would be good too  Also, is it possible to create a 4 bar lifter?
1928
« on: April 22, 2017, 07:06:33 PM »
I used the search thing on here and saw no sign of one in GTM history so...
So Havok and I have just recently done a taglocke. With the end result being... Havok quit midway, claimed he cheated, and left Geometry the Geodude to collect moss.
Seeing as how I: A. Lack real life friends, B. Have an unreliable brother, and C. spend half my time nowadays on GTM; I was wondering if a GTM Taglocke was possible...
Recording would probably be optional, however, posting what events happened after your turn, I'd highly recommend.
Its simple Nuzlocke rules, except after a player completes a gym, they export a SAV file and give the file to the next person in line. Its simple. Hit the Export Button and save it as a battery file. .png) Next, Go to the File host, and PM the next person in line the SAV file. (Note you might have to save ingame beforehand and tell them what route you've caught pokemon already) .png) Next the person who received the SAV file Imports the SAV file. .png) And finds out that the person before them has been playing more than they should've. .png)
Anyone up furret?(Image removed from quote.)
If so, I'd like to ask you guys what game to play and which gym you'll take. (First come, first serve)
Game: Pokemon (What type is yet to be decided)
Gym 1:
Gym 2:
Gym 3:
Gym 4:
Gym 5:
Gym 6:
Gym 7:
Gym 8:
Champion:
Players:
Silverfish (from PM)
GuildenFlame (from IRL)
Shield (from discord)
Wenxianglee (from discord)
NeighImACarrot(from discord)
Ty4er (from Discord)
HavokMcCheater (From Reply)
2 people left.
No need to PM me, but in case you did, this'll make sure you know what has been voted as of now.
Silverfish-(Randomized) Platinum (No clauses mentioned)
HavokMcCheater-Crystal (No clauses mentioned) Id be down for this platinum is hype
1929
« on: April 22, 2017, 05:05:04 PM »
Ok so more than 1 build in a day, crazy I know. This is a vs spinner, it's Ti 5. Snowstorm: 
1930
« on: April 22, 2017, 03:27:00 PM »
Its mounted to the first one and its a pl10 cuz it'll bring it to a HW
1931
« on: April 22, 2017, 03:12:16 PM »
Ok so I've made a clamp bot, but this one is vertical. It's pl10 Problems ive identified: Lack of batteries, fixing it now. Cobros Outer:  Corbros Inner: 
1932
« on: April 20, 2017, 05:56:27 PM »
Love the claw setup. I feel like it could have better drive. Then it could perhaps boxrush spinners. Sadly, then you'll have to pretty much remake the entire thing...
Honestly i dont mind, another idea i had was that i could increase the chassis height a bit to add some armour plates.
1933
« on: April 20, 2017, 02:04:41 PM »
Hi, so I've made a horizontal clamp bot thought it'd be fun. It's pl10 and now weights 395.5 due to adding steel hookings on the top bit to the arms, and removing the front ones on the chassis and the Al extenders they were connected to. The main issue with it atm is there's nothing I can really do to deal with spinners. Oh and it's called Big Meaty Claws... Outer:  Inner: 
1934
« on: April 18, 2017, 04:40:01 PM »
Here's the IRL extenders download Hoppin: https://gametechmods.com/forums/index.php?action=downloads;sa=view;down=286.
Yes, I do like the chassis paint job but the flipper could use a little beauty treatment like using the extender pack combined with the armor pack if do please, or just use the extenders. Sometimes I find it best to connect the chisels to a single skin hinge so you can adjust the ground clearance to get under other Robots easier. Just don't make it too low otherwise your Bot will be hanging off the floor. Also try using TWM3R for the drive. It may give lower drive power than the ones you're currently using, but this will give you enough weight spare to add better armor or a storm (VDMA) front hinge burst piston if your intention is to make a middle weight. But do keep up the good work. Also what Armour are you using?
Thanks Dark-Al, ok so new flipper slightly thinner but still works well. Was able to keep the drive and increase the weapon (But I have made two other versions with each of these separate features, low drive & high power weapon then vice versa. The flippers now red. Finally it's Pl10. Batteries might be lack luster though no too sure. Inferno VI: 
1935
« on: April 18, 2017, 03:03:45 PM »
I like it. Flipper DOES look a little messy though, and is probably pretty underpowered too. Most lightweight front hingers I've seen use more than a VDMA front hinge burst, so on a middleweight it probably won't be enough. You should probably get DSCs IRL extender packs and make the flipper yellow at the very least, but making the transition from one plate to the other less obvious/jarring would probably help with the appearance too.
Ok, so I've made the flipper cleaner and am working on making another version of Inferno with with storm burst motor and a thinner panel, just have issues fitting in the batteries. And where can I download the IRL extenders pack? Inferno V: 
1936
« on: April 18, 2017, 01:34:50 PM »
Finally a front hinged flipper, this is Inferno IV. Very Firestorm like I know. Would also like to change the flipper shape a bit or make it look cleaner. Any suggestions let me know. Outer 1:  Outer 2:  Inner: 
1937
« on: April 17, 2017, 02:25:22 PM »
Ok so... Hows it going? I made a recreation of the robot, bigger brother (S5 Onward), feedback appreciated. Outer 1:  Outer 2:  Inner: 
1938
« on: April 06, 2017, 04:16:33 PM »
Solid, tight little build. What's the armor?
Suggestions would be to try skinning it (could be a fantastic bot w/ a good skin), otherwise you might consider downgrading drive motors for astros and try to fit in another ant (that flipper will drain your batteries fast), though that suggestion is made w/o knowledge of armor.
Update: what extenders are you using, since I see 2 colors?
It's Pl10 and the extenders are Ti whilst the top ones are Al with self righting. As for skinning, working on it  Updated: Outer  Inner 
1940
« on: April 06, 2017, 12:00:54 PM »
Tri-Terra is a LW flipper, can self right. Any suggestions? Tri-Terra Outer:  Tri-Terra Inner: 
Pages: 1 ... 90 91 92 93 94 95 96 [97] 98 99 100 101
|
Show Posts