This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Messages - Hoppin
Pages: 1 ... 75 76 77 78 79 80 81 [82] 83 84 85 86 87 88 89 ... 101
1621
« on: November 21, 2017, 08:14:25 AM »
a small Stock MW tourney would be welcome
make it the bridge of doom arena tho
This
1622
« on: November 20, 2017, 06:26:17 PM »
Not sure off the top of my head what the motor is, pretty sure it's the VDMA, still getting used to the names.
Here are the internals:
(Image removed from quote.)
Looks like a small. You'll probs need a bigger one than that to get some power flips in. medium should be good. As far as colour variation I agree with TR. Maybe black discs and the wedge edge And if you can find the weight some angle panels.
1623
« on: November 20, 2017, 05:52:52 PM »
Whats it's weapon?
1624
« on: November 20, 2017, 04:51:04 PM »
Wow, tis rather good, I would recommend setting up the perm at around a 45 angle and making the distance shorter. Then finding weight for some small (which should be ok to add as you have 30kg left. Or even large typhoon teeth. This may involve turning some rear panels into a material lesser if you want the large teeth(St to Ti, Ti to Alu). But looks pretty cool so far
1625
« on: November 20, 2017, 03:51:43 PM »
Ti5 633.3. Probs gonna tone it down to 4 reg NPCs to make it a CW and remove a few other things like 1 of the bottom plate. Weapon is on an axle. Have nice day. Deadly Martin
1626
« on: November 20, 2017, 01:12:09 PM »
Thanks guys, the crusher seems to work player controlled but idk how it'd do Ai'd
1627
« on: November 20, 2017, 08:37:32 AM »
I have come across a lot of tournament recently which require middleweight robots, so spent a while making one that can actually win a battle. I turned off CF as the tournament I'm looking at doesn't allow it. It's got a 100% win streak against the AI robots, so is easily my most successful robot thus far. The armour is Titanium 5, so a previous post suggested Titanium>Steel. It's pretty rapid and the axe comes down with good speed. I did all I could within the weight limit. Would this robot by a good entry to my first tournament? Bearing in mind this is my first ever middleweight.
(Image removed from quote.)
(Image removed from quote.)
Im guessing this is for Silverfishes tourney. If it is iirc he recently allowed RA2CF. I think you should ditch the ant bats for 3/4 red bats. not only this, but the axe head seems far too weak, try I have spike it's more weight but definitely worth the switch. And if you can the wedges would be best mounted on a metal hinge, should make the wedge itself much more effective. Not a bad start it most certainly looks the part
1628
« on: November 20, 2017, 08:13:32 AM »
1629
« on: November 19, 2017, 07:04:43 PM »
1630
« on: November 19, 2017, 01:56:24 PM »
Beautiful 
1631
« on: November 18, 2017, 07:01:22 PM »
Have you considered changing some of the back armour to Ti and the the underside to Ti, could better protect it from gutrips? And if you'd like to knock off 35kg to make it a CW. Maybe change the steel to Ti
1632
« on: November 17, 2017, 07:56:39 PM »
Theres a lot of space at the back. I would just recommend usig extenders to make wheelguards and just plate the back instead of just building this box around it. This will give you wight to increase the width of the flipper and an some angle panels on the side of the flipper. Non the less its a great improvement
1633
« on: November 17, 2017, 06:50:26 PM »
1634
« on: November 17, 2017, 06:29:34 PM »
For starters you can most certainly shrink that chassis, make it much flatter and ditch the saw. This can give you more weight to add possibly a bigger ram and more drive. Also dsl has wedge edges, located with the angled panels attach them to the panel, it'll be more effective. For the motors currently you'll only need 4 red batteries
1635
« on: November 17, 2017, 09:21:30 AM »
Welcome to GTM Sagaris, Im no expert as RWRA2 so I cant comment on the internal components but I'll give some advice about the design. 1. I noticed it's double layered. With the assumption both layers are Alu I would recommend have Ti panels overlayed with Polycarb. 2. The front of the robot is rather messy and you might be able to add them front armour plates to hinges if RWRA2 has them it'll make the wedge more effective. Overall it's a good design, it just needs cleaning up. Also I recommend you wanna try and build as close to the weight limit as you can. As for tournaments. DSL 2.2 is the most popular for them so I would recommend trying that out at your own pace and starting a showcase there. You'd get a great amount of feedback there. Here's a link on how to enter tournaments: https://gametechmods.com/forums/tutorials-and-tips/beginners-guide-to-entering-a-tournament/
1636
« on: November 16, 2017, 10:02:06 AM »
Polycarb panels?
1637
« on: November 16, 2017, 08:01:18 AM »
You still have 140kg till you hit the weight limit. I would recommend 1. Using perms instead of the E-Teks and using the EEL perms as you can pace the perm further back. I also think you'll need more teeth on the bar. And some wheel guards
1638
« on: November 15, 2017, 07:46:56 PM »
Hornet and The Sting, Hornet is the 600kg flammer and The Sting is the 200kg VS
1639
« on: November 14, 2017, 07:26:29 PM »
Something more serious
[ Quoting of attachment images from other messages is not allowed ]
Looks really solid! Is that a 60x120 triangle piece on the side or a 40x70?
It's 60x120
1640
« on: November 14, 2017, 04:14:08 PM »
Pages: 1 ... 75 76 77 78 79 80 81 [82] 83 84 85 86 87 88 89 ... 101
|
Show Posts