Author Topic: ty4er's stockcase (Read 16695 times)

ty4er · « **on:** December 18, 2010, 07:17:06 AM »

eventually i got bored so i decided to make a stock showcase.
i have had stock for ages and have lots of robots but i will only showcase a few.
all of these i made before i joined here so they are gonna be pretty bad.
anyways here is my first one:

it is a triple hs with hammers and works quite well

Naryar · « **Reply #1 on:** December 18, 2010, 07:46:47 AM »

Go and have a look at this

http://beetlebros.gametechmods.com/ra2techs.htm

ty4er · « **Reply #2 on:** December 18, 2010, 07:52:02 AM »

will do

and as i said these are all old and i havent made any new robots on stock except from robots in tournaments so all of them i made before i joined here so they are bad i know.

ty4er · « **Reply #3 on:** January 04, 2011, 02:10:30 PM »

ok after a while i felt like coming back to stock.
well here is nuts 'N' bolts

it does quite good as a MW
any ideas?

Naryar · « **Reply #4 on:** January 04, 2011, 02:21:48 PM »

1 black is enough for 3 spin motors. Remove the Supervolts and small battery packs.

Also, not enough weapons.

Scorpion · « **Reply #5 on:** January 04, 2011, 02:28:59 PM »

That weapon motor is gonna get killed to death.
You need to have a good look at that link Nar posted before.

J · « **Reply #6 on:** January 04, 2011, 02:36:46 PM »

TC, you dont need 8 million batteries for a robot.
Pinks are pretty much useless.
Supervolts are decent for MWs
And HWs only really need 1 to 2 Blacks

ty4er · « **Reply #7 on:** February 02, 2011, 11:24:02 AM »

I got bored of no internet so i came back to stock and made this:

Yes, it does have 3 blacks and 5 HP Z-TECHS for weapons.

Scorpion · « **Reply #8 on:** February 02, 2011, 11:28:10 AM »

Too much power, 3 blacks is OTT, the actual setup is very messy and when you've cleaned up the chassis, you may want to try and effe moar weaponry on there (see Nar's link if you can't remember what effeing is).

090901 · « **Reply #9 on:** February 02, 2011, 11:29:19 AM »

huge chassis and it's over powered. You can mount 4 HPz on 1 snapper. Also, get Starcore v2.0.

J · « **Reply #10 on:** February 02, 2011, 12:08:39 PM »

Quote from: ty4er on February 02, 2011, 11:24:02 AM

(Image removed from quote.)

Your overkilling in Snappers.
If you use the eFFe glitch, you can cut-back on snappers and get more weight to use for the robot.
Add to it, 2 Blacks is plenty of power for what your getting at.

Reier · « **Reply #11 on:** February 02, 2011, 03:07:47 PM »

Ew don't get 2.0, get like 4.0 or Inf AI. You'll get better wayyyy faster.

ty4er · « **Reply #12 on:** March 01, 2011, 02:03:04 PM »

bumpzy
I decided to come back to stock for like 5 mins and i made a few antweights from Ianh05's chassis
(I apologize if they have already been made as i'm just a bit too tired to look through to see if they have)

J · « **Reply #13 on:** March 01, 2011, 02:09:14 PM »

Quote from: ty4er on March 01, 2011, 02:03:04 PM

(Image removed from quote.)

AW SFTW <3

Bubbleman · « **Reply #14 on:** March 01, 2011, 02:11:41 PM »

Quote from: J on March 01, 2011, 02:09:14 PM

Quote from: ty4er on March 01, 2011, 02:03:04 PM
(Image removed from quote.)
AW SFTW <3

Nonono, that would require a chewblade, not a sawblade :P
Anyway, i have no experience what so ever with AW's, so i can not offer advice. sorry

J · « **Reply #15 on:** March 01, 2011, 02:20:27 PM »

Quote from: Bubbleman on March 01, 2011, 02:11:41 PM

Quote from: J on March 01, 2011, 02:09:14 PM
Quote from: ty4er on March 01, 2011, 02:03:04 PM
(Image removed from quote.)
AW SFTW <3
Nonono, that would require a chewblade, not a sawblade :P Well.. yea
Anyway, i have no experience what so ever with AW's, so i can not offer advice. sorry

AWs are fairly easy to ~~edit~~build, if your using Ian's chassis.
Just use an angel motor and stick a few razors on it, and your good to go O,o

ty4er · « **Reply #16 on:** April 18, 2011, 02:39:10 AM »

Time to revive this old thing with this new thing...

Weighs 249.5 (FFFFFFFFF-) but i can make it properly a LW if i trim the chassis a bit i hope...
And look what it can do :3

Only plastic armour but i've had hardly any damage to the chassis yet...

Squirrel_Monkey · « **Reply #17 on:** April 18, 2011, 02:41:19 AM »

Why not KLONE Child's play?

Vertigo · « **Reply #18 on:** April 18, 2011, 02:46:29 AM »

Quote from: Squirrel_Monkey on April 18, 2011, 02:41:19 AM

Why not KLONE Child's play?

^This^

ty4er · « **Reply #19 on:** April 18, 2011, 02:49:43 AM »

Quote from: Squirrel_Monkey on April 18, 2011, 02:41:19 AM

Why not KLONE Child's play?

I honestly don't think i can build anything else good enough :P
and because i can.
And it's not completely a klone...