Author Topic: Noodle's Showcase  (Read 34930 times)

Offline Noodle

  • Ultra Heavyweight
  • Posts: 1808
  • Rep: 1
  • faggot
    • View Profile
    • Awards
  • See profile for gamer tags: Yes
Noodle's Showcase
« on: May 16, 2010, 10:53:17 PM »
Well a little bit about me, I've been playing RA2 ever since my parents picked it up in a bargain bin when I was younger and I've loved it ever since.

I've been building bots for a while and I thought I was pretty good at it until I took a look at these forums and found a bunch of robots that could prolly  tear my best robot to pieces in seconds.  To put things in perspective, people stack crap like its nobody's business.  The only part I've ever stacked is a small battery pack, and very rarely at that.

Oh well, I suppose I'll post what I do have.  This is spike strip.  It's a box with wheels and a load of spikes on the front.  It scores a good deal of points (I've got a couple hits where I scored about 1000).  I tried fighting Emergency but could only score 6000 or so before I just went berserk on him and ko'd him.

Anyway, here's a few pictures to help everyone's self esteems:


I have no idea why my team's name is battlebots and the icon is fire when I know how to use custom icons and come up with better names.
« Last Edit: November 04, 2010, 07:37:06 PM by Noodle »

Online Pwnator

  • *
  • Posts: 6676
  • Rep: 15
  • Awards BOTM Winner
    • View Profile
    • http://pwnator.tumblr.com
    • Awards
  • See profile for gamer tags: Yes
Re: Noodle's Showcase
« Reply #1 on: May 16, 2010, 11:01:38 PM »
Welcome to the forums, dude.

Anyway, it's not that bad. It's actually quite decent if you ignore the fact that it's underweight. It only needs a Supervolt and a Nifty (or even just one Supervolt), since one Supervolt can power 4 HP-Zteks for 3 minutes.

And square extenders aren't better than round extenders. Just use those so you'll have more free weight to attach weapons. Use the free weight by making two weapon racks: one at the top and the other at the bottom. And shiny wheels and rubber wheels can still make your bot invertible. :D


If you're looking for a better challenge, get the Starcore v3 pack from the Downloads section. The bots there are as tough (or slightly tougher) than your bots. :D
Clash Cubes 1 - Grey Matter (Runner-Up)
King of Karnage - Sideshow Freak (Runner-Up, Best Engineered)
Rust In Pieces - Paper Cut 3 (Grand Champion, Most Dangerous Bot)
Wheely Tag Tournament - Ion Thruster (Grand Champion, along with Ounces' DiSemboweLment)
UK vs USA - Dark Striker (Grand Champion)
Rust In Pieces 2 - Claymore (Runner-Up, Favourite Bot)
BBEANS 6 - Infection 4 (Runner-Up)
RA2 Team Championships - Serious Business, Skeksis (Runner-Up, along with Scrappy, S_M, and Badnik)
RA2 Team Championships 2 - The Other Stig (Runner-Up, along with Scrappy, S_M, Badnik, 090901, and R1885)
Replica Wars 3 - Abaddon (Runner-Up, Luckiest Bot)
BroBots - wheebot & yaybot (Runner-Up)
Robo Zone 2 - Dipper (4th place, Survival Champion, & Best Axle Bot)
ARBBC - The Covenant (3rd place, BW Rumble Winner, Most Feared BW)

Offline Reier

  • Rieir
  • *
  • Posts: 8579
  • Rep: 8
  • I GOT 3RD IN RAW1
    • https://www.youtube.com/c
  • Awards old BOTM Winner
    • View Profile
    • Awards
Re: Noodle's Showcase
« Reply #2 on: May 16, 2010, 11:02:56 PM »
Hey Noodlez, welcome to GTM.
Looks like a pretty good first bot in all honesty. ;D Probably should do what Pwn said, though.
ALERT- Another WS coming up...
voted best bot builder two times and counting babayy. the best ra2 builder who has never won an actual tournament match
ReiAI pack for Ironforge
My drawings, and my webcomics
Why online PVP will save RA2
The problem with competitive IRL in RA2
I'm fine with hugging reier

Offline Noodle

  • Ultra Heavyweight
  • Posts: 1808
  • Rep: 1
  • faggot
    • View Profile
    • Awards
  • See profile for gamer tags: Yes
Re: Noodle's Showcase
« Reply #3 on: May 16, 2010, 11:29:59 PM »
Welcome to the forums, dude.

Anyway, it's not that bad. It's actually quite decent if you ignore the fact that it's underweight. It only needs a Supervolt and a Nifty (or even just one Supervolt), since one Supervolt can power 4 HP-Zteks for 3 minutes.

And square extenders aren't better than round extenders. Just use those so you'll have more free weight to attach weapons. Use the free weight by making two weapon racks: one at the top and the other at the bottom. And shiny wheels and rubber wheels can still make your bot invertible. :D


If you're looking for a better challenge, get the Starcore v3 pack from the Downloads section. The bots there are as tough (or slightly tougher) than your bots. :D

Ok well first off I didn't know about that battery thing.  I just loaded it with batteries cus I figured it'd sap alot of juice.
I used square brackets when I made this thing cus it was easier to turn them around perfectly.  This was true until I looked at a round extender from the side and realized it only had 6 sides.

I took some of your advice, put some new paint on, and came up with this:


I guess I'll do some fights later when I'm not procrastinating on homework and staying up past midnight at the same time.

BTW, thanks.

Noodlez

I still don't get why everyone calls me Noodles.  Is the plural more appealing or something?
It doesn't really bother me I just wanted to know why.

Offline Sage

  • *
  • Posts: 6182
  • Rep: 11
  • RA2 Wizard & GTM's Favorite Stock Builder 2015
  • Awards Sage's Favorite BOTM Winner
    • View Profile
    • Awards
Re: Noodle's Showcase
« Reply #4 on: May 16, 2010, 11:31:59 PM »
Now use better weapons. Iron spikes are great on rammers. Also try putting some weapons sideways so they protect the sides.
You got my vote for RA2 Wizard. Always and forever.

Offline Noodle

  • Ultra Heavyweight
  • Posts: 1808
  • Rep: 1
  • faggot
    • View Profile
    • Awards
  • See profile for gamer tags: Yes
Re: Noodle's Showcase
« Reply #5 on: May 16, 2010, 11:38:19 PM »
Now use better weapons. Iron spikes are great on rammers. Also try putting some weapons sideways so they protect the sides.

Right-o



This is all I'm gonna do for tonight.  I gotta bury this homework.

Offline Bubbleman

  • Heavyweight
  • Posts: 560
  • Rep: 0
  • quit w player
    • FatherSplat
    • View Profile
    • osu! Userpage
    • Awards
  • See profile for gamer tags: Yes
  • Skype: Bubbleman532
  • Discord: Bubbleman#0993
Re: Noodle's Showcase
« Reply #6 on: May 17, 2010, 01:31:54 AM »
Naryar will definately flame you for empty space, but, to be honest, i could never build that well in stock!
 :welcome, BTW.
I... I think I've quit. Lurking and posting where I feel it's needed from time to time. I was never particularly good, but I tried. Never really succeeding, but trying all the same.
This is what I spend my time on now
https://twitch.tv/bubbleman

Online Pwnator

  • *
  • Posts: 6676
  • Rep: 15
  • Awards BOTM Winner
    • View Profile
    • http://pwnator.tumblr.com
    • Awards
  • See profile for gamer tags: Yes
Re: Noodle's Showcase
« Reply #7 on: May 17, 2010, 01:34:22 AM »
Nah he won't. There are times when attempting to remove empty space by using a 'U' chassis actually eats up more weight than using a simple box chassis. I found that out when I built Core Drill. XD
Clash Cubes 1 - Grey Matter (Runner-Up)
King of Karnage - Sideshow Freak (Runner-Up, Best Engineered)
Rust In Pieces - Paper Cut 3 (Grand Champion, Most Dangerous Bot)
Wheely Tag Tournament - Ion Thruster (Grand Champion, along with Ounces' DiSemboweLment)
UK vs USA - Dark Striker (Grand Champion)
Rust In Pieces 2 - Claymore (Runner-Up, Favourite Bot)
BBEANS 6 - Infection 4 (Runner-Up)
RA2 Team Championships - Serious Business, Skeksis (Runner-Up, along with Scrappy, S_M, and Badnik)
RA2 Team Championships 2 - The Other Stig (Runner-Up, along with Scrappy, S_M, Badnik, 090901, and R1885)
Replica Wars 3 - Abaddon (Runner-Up, Luckiest Bot)
BroBots - wheebot & yaybot (Runner-Up)
Robo Zone 2 - Dipper (4th place, Survival Champion, & Best Axle Bot)
ARBBC - The Covenant (3rd place, BW Rumble Winner, Most Feared BW)

Offline System32

  • *
  • Posts: 4663
  • Rep: 4
  • Reality
    • View Profile
    • Awards
Re: Noodle's Showcase
« Reply #8 on: May 17, 2010, 01:54:20 AM »
Unless you need better turning... Wasn't noodle sucked into heck?
Put this onto your signature if you were part of this crappy fad in '03.

Online Pwnator

  • *
  • Posts: 6676
  • Rep: 15
  • Awards BOTM Winner
    • View Profile
    • http://pwnator.tumblr.com
    • Awards
  • See profile for gamer tags: Yes
Re: Noodle's Showcase
« Reply #9 on: May 17, 2010, 02:10:06 AM »
I thought she was with Russel?
Clash Cubes 1 - Grey Matter (Runner-Up)
King of Karnage - Sideshow Freak (Runner-Up, Best Engineered)
Rust In Pieces - Paper Cut 3 (Grand Champion, Most Dangerous Bot)
Wheely Tag Tournament - Ion Thruster (Grand Champion, along with Ounces' DiSemboweLment)
UK vs USA - Dark Striker (Grand Champion)
Rust In Pieces 2 - Claymore (Runner-Up, Favourite Bot)
BBEANS 6 - Infection 4 (Runner-Up)
RA2 Team Championships - Serious Business, Skeksis (Runner-Up, along with Scrappy, S_M, and Badnik)
RA2 Team Championships 2 - The Other Stig (Runner-Up, along with Scrappy, S_M, Badnik, 090901, and R1885)
Replica Wars 3 - Abaddon (Runner-Up, Luckiest Bot)
BroBots - wheebot & yaybot (Runner-Up)
Robo Zone 2 - Dipper (4th place, Survival Champion, & Best Axle Bot)
ARBBC - The Covenant (3rd place, BW Rumble Winner, Most Feared BW)

Offline System32

  • *
  • Posts: 4663
  • Rep: 4
  • Reality
    • View Profile
    • Awards
Re: Noodle's Showcase
« Reply #10 on: May 17, 2010, 03:49:18 AM »
I thought she was with Russel?

Russel's not with noodle, cause he's at plastic beach, I think.
 
In fact, Murdoc and 2D are there as well. Noodle's probably still with Russel's dead rapper friend in heck somewhere.
Put this onto your signature if you were part of this crappy fad in '03.

Offline Jonzu95

  • Giga Heavyweight
  • Posts: 12637
  • Rep: -27
    • View Profile
    • Awards
Re: Noodle's Showcase
« Reply #11 on: May 17, 2010, 06:47:11 AM »
Good looking bot Noodle. Btw, you have Cool Avatar. :mrgreen:

Offline NFX

  • *
  • Posts: 14035
  • Rep: 11
  • SliSliSliSliSliSliSliSli(0)
    • AwesomeFish921
  • Awards BOTM Winner
    • View Profile
    • Awards
  • See profile for gamer tags: Yes
  • Skype: nfxtreme0992
Re: Noodle's Showcase
« Reply #12 on: May 17, 2010, 01:52:38 PM »
Welcome to the forums, dude. ;)

That actually looks pretty decent for a first bot, to be honest. And Naryar might yell at you for empty space, but I'm fairly sure a little bit doesn't hurt. Maybe put some Iron Spikes out sideways from the extenders for some side protection.

Next thing you might want to try is stacking batteries. Basically where you put one battery in first (preferably a Blackvolt) and then put another one in almost exactly the same place, but a little bit to one side. Saves a good amount of space, and therefore weight for weaponry and such.
Co-creator of The RA2 Randomiser



Offline Noodle

  • Ultra Heavyweight
  • Posts: 1808
  • Rep: 1
  • faggot
    • View Profile
    • Awards
  • See profile for gamer tags: Yes
Re: Noodle's Showcase
« Reply #13 on: May 17, 2010, 04:22:41 PM »
Unless you need better turning... Wasn't noodle sucked into heck?
I thought she was with Russel?

Russel's not with noodle, cause he's at plastic beach, I think.
 
In fact, Murdoc and 2D are there as well. Noodle's probably still with Russel's dead rapper friend in heck somewhere.

Wow I love these forums allready!

Noodle's supposed to be in heck somewhere but right about now nobody has any idea as to where she is.

Russel is in the Pacific Ocean somewhere making his way to Plastic Beach methinks.

I'll get back on topic in a sec, I'll tweak up Spike Plow some more to see what I can do.
Edit:
It appears I've hit the weight limit.  I don't really want to sacrifice structural integrity for some wheel protectors unless it works better to do so.

What do the pro's think?

Offline Jack Daniels

  • *
  • Posts: 2719
  • Rep: 9
  • Losing Tournaments with Style
    • matt.morrill.12
  • Awards BOTM Winner
    • View Profile
    • My abandoned online RPG project.
    • Awards
Re: Noodle's Showcase
« Reply #14 on: May 17, 2010, 04:42:45 PM »
The iron spikes suit it better now.  You will discover that there are certain components which rule the stock game.  Other components are good if used a certain way.  And some components are rubbish altogether.  You take advice well, which earns respect on the forum ten-fold.

All in all, that is a solid rammer you are working on.  It is cool that you have enjoyed the game for so long and now you are ready to learn more.

Keep having fun.

Offline Sage

  • *
  • Posts: 6182
  • Rep: 11
  • RA2 Wizard & GTM's Favorite Stock Builder 2015
  • Awards Sage's Favorite BOTM Winner
    • View Profile
    • Awards
Re: Noodle's Showcase
« Reply #15 on: May 17, 2010, 04:56:48 PM »
Not much you can do without copying the generic HW rammer. You could make the back of the chassis skinnier so the motors touch eachother (the back 2 pairs) and then have the front widened for the 1 battery and 1 more pair of motors. Cooler looking plus you get some more weapon weight.
You got my vote for RA2 Wizard. Always and forever.

Offline Noodle

  • Ultra Heavyweight
  • Posts: 1808
  • Rep: 1
  • faggot
    • View Profile
    • Awards
  • See profile for gamer tags: Yes
Re: Noodle's Showcase
« Reply #16 on: May 17, 2010, 04:59:45 PM »
The iron spikes suit it better now.  You will discover that there are certain components which rule the stock game.  Other components are good if used a certain way.

Yeah, iron spikes and razortips are ftw (not hit normals).

And some components are rubbish altogether. 

*cough* Servo Motors *cough*

You take advice well, which earns respect on the forum ten-fold.

Sweeet

All in all, that is a solid rammer you are working on.  It is cool that you have enjoyed the game for so long and now you are ready to learn more.
Keep having fun.

Thanks!  I love the warm reception I'm getting on this forum.

Not much you can do without copying the generic HW rammer. You could make the back of the chassis skinnier so the motors touch eachother (the back 2 pairs) and then have the front widened for the 1 battery and 1 more pair of motors. Cooler looking plus you get some more weapon weight.

I guess I could try it.  I just don't like re-shaping the chassis from scratch like that cus I still haven't gotten down the relativity in sizes between the chassis grid and the components.

Offline COOLRUNNER87

  • Heavyweight
  • Posts: 467
  • Rep: 3
  • Failure is the only option!
    • View Profile
    • Awards
Re: Noodle's Showcase
« Reply #17 on: May 17, 2010, 05:02:00 PM »

And some components are rubbish altogether. 

*cough* Servo Motors *cough*


Not entirely. Servo-boosted robots, such as the one posted on the front page, can be quite deadly with servo motors.

Offline russian roulette

  • *
  • Posts: 1770
  • Rep: 1
  • What year is it?!?!?
    • View Profile
    • Awards
Re: Noodle's Showcase
« Reply #18 on: May 17, 2010, 07:49:14 PM »
Unless you need better turning... Wasn't noodle sucked into heck?
I thought she was with Russel?

Russel's not with noodle, cause he's at plastic beach, I think.
 
In fact, Murdoc and 2D are there as well. Noodle's probably still with Russel's dead rapper friend in heck somewhere.

Wow I love these forums allready!

Noodle's supposed to be in heck somewhere but right about now nobody has any idea as to where she is.

Russel is in the Pacific Ocean somewhere making his way to Plastic Beach methinks.

I'll get back on topic in a sec, I'll tweak up Spike Plow some more to see what I can do.
Edit:
It appears I've hit the weight limit.  I don't really want to sacrifice structural integrity for some wheel protectors unless it works better to do so.

What do the pro's think?
Well, thank god more than one of us likes the Gorillaz. I think they are funny as heck and great to listen to.

Offline DuckRA2

  • *
  • Posts: 1006
  • Rep: 1
    • View Profile
    • Awards
Re: Noodle's Showcase
« Reply #19 on: May 17, 2010, 08:10:02 PM »
I think it needs two stacked blacks. but that is just my lil opinion. I think you could also fit pistons instread of static weapons. And then a little castor or plow armor.