Author Topic: Nate Tech's Showcase (Read 15023 times)

smashysmashy · « **Reply #20 on:** October 04, 2011, 12:05:59 PM »

Being stubborn won't get you far - I learnt that the hard way

Nate Tech · « **Reply #21 on:** October 04, 2011, 12:13:50 PM »

Ok, i'll make it have hp z tek weapons. Right after I have lunch.

Gazea2 · « **Reply #22 on:** October 04, 2011, 12:36:27 PM »

Quote from: That Robot is a Spy! on October 04, 2011, 11:50:44 AM

Quote from: Nate Tech on October 04, 2011, 11:48:34 AM
If I used HP Z teks then it culdn't be a MW
Make the chassis 1/2 the size, one supervolt, DSA, control board, take out a Disc and you should be able to make it MW with HPZ. They spin up to twice as fast , which equals twice as damage potential.

Instead of just telling him to do things, why not also tell him what he has done well?

Nate, you have used good batteries (although the pink is not needed) and have chosen good wheels and weapons. Your chassis space management is quite good, too. Keep it up. (:

smashysmashy · « **Reply #23 on:** October 04, 2011, 12:51:21 PM »

Quote from: Gazea2 on October 04, 2011, 12:36:27 PM

Quote from: That Robot is a Spy! on October 04, 2011, 11:50:44 AM
Quote from: Nate Tech on October 04, 2011, 11:48:34 AM
If I used HP Z teks then it culdn't be a MW
Make the chassis 1/2 the size, one supervolt, DSA, control board, take out a Disc and you should be able to make it MW with HPZ. They spin up to twice as fast , which equals twice as damage potential.

Instead of just telling him to do things, why not also tell him what he has done well?

Nate, you have used good batteries (although the pink is not needed) and have chosen good wheels and weapons. Your chassis space management is quite good, too. Keep it up. (:

There we go, thank you Gaz-the-peacekeeper =D

That Robot is a Spy! · « **Reply #24 on:** October 04, 2011, 01:03:42 PM »

Your Steam ID does not exist.

Gazea2 · « **Reply #25 on:** October 04, 2011, 01:05:28 PM »

Quote from: smashysmashy on October 04, 2011, 12:51:21 PM

Quote from: Gazea2 on October 04, 2011, 12:36:27 PM
Quote from: That Robot is a Spy! on October 04, 2011, 11:50:44 AM
Quote from: Nate Tech on October 04, 2011, 11:48:34 AM
If I used HP Z teks then it culdn't be a MW
Make the chassis 1/2 the size, one supervolt, DSA, control board, take out a Disc and you should be able to make it MW with HPZ. They spin up to twice as fast , which equals twice as damage potential.

Instead of just telling him to do things, why not also tell him what he has done well?

Nate, you have used good batteries (although the pink is not needed) and have chosen good wheels and weapons. Your chassis space management is quite good, too. Keep it up. (:

There we go, thank you Gaz-the-peacekeeper =D

Damn Straight.

Saving threads since 1998.

Damn Bent.

Nate Tech · « **Reply #26 on:** October 04, 2011, 01:12:50 PM »

Quote from: That Robot is a Spy! on October 04, 2011, 01:03:42 PM

Your Steam ID does not exist.
(Image removed from quote.)

yes it does, it's the_doolster

smashysmashy · « **Reply #27 on:** October 04, 2011, 01:16:31 PM »

Forgive me, but what do y'all think when I say what would happen if you decreased the chassis size and mounted the drive motors on extenders?

Nate Tech · « **Reply #28 on:** October 04, 2011, 01:21:59 PM »

I think that's a good idea, but it makes the motors vulnerable

smashysmashy · « **Reply #29 on:** October 04, 2011, 01:25:15 PM »

Quote from: Nate Tech on October 04, 2011, 01:21:59 PM

I think that's a good idea, but it makes the motors vulnerable

Correct, but I was just thinking whether it would be worth it.

I NEED SOMEONE MORE EXPERIENCED

FOTEPX · « **Reply #30 on:** October 04, 2011, 01:29:57 PM »

Quote from: smashysmashy on October 04, 2011, 01:25:15 PM

Quote from: Nate Tech on October 04, 2011, 01:21:59 PM
I think that's a good idea, but it makes the motors vulnerable
Correct, but I was just thinking whether it would be worth it.

I NEED SOMEONE MORE EXPERIENCED

Hi.

I don't think it's a good idea, because the extender work to get all 3 motors on w+ the baseplate will be heavier than the 3 baseplates.

Gazea2 · « **Reply #31 on:** October 04, 2011, 01:34:22 PM »

But remember, you save weight with a lighter chassis. Let's not start a discussion.

Squirrel_Monkey · « **Reply #32 on:** October 04, 2011, 01:39:32 PM »

We could just point him towards Minesweeper. That's where that bot seems to be heading...

Mr. AS · « **Reply #33 on:** October 04, 2011, 01:53:14 PM »

You don't need that random pink battery.

Nate Tech · « **Reply #34 on:** October 04, 2011, 02:14:20 PM »

Ok, here's the final version:

I had to remove 1 razor but now it's as powerful as the original

Mr. AS · « **Reply #35 on:** October 04, 2011, 02:21:14 PM »

Quote from: Nate Tech on October 04, 2011, 02:14:20 PM

Ok, here's the final version:

A bot is never a "final version". There's always changes to be made/experimented with.
You could probably shink the chassis a -little bit- more to get those baseplate connectors to be squished in. ~~Stacked blacks?~~ NOAP

Nate Tech · « **Reply #36 on:** October 04, 2011, 02:24:16 PM »

I can't get blacks to stack, and is there any way to shrink the chassis without having to re do everything?

Somebody · « **Reply #37 on:** October 04, 2011, 02:41:42 PM »

Nope. And keep trying on the blacks. Make sure you have a little bit of space around them to work with.

Scrap Daddy · « **Reply #38 on:** October 04, 2011, 03:06:48 PM »

holy crap so much terrible advice.

I would check out, like what sm said, https://gametechmods.com/RA2wiki/index.php?title=Minesweeper because thats pretty much what you are going to loook to do. If you shrink the chassis even more and if you want you could put the side motors on like minesweeper to maybe save more weight you should be able to get that last razor.

dont let them tell you how to build your bots either. If you want three face spinners, use 3 face spinners.

Natef · « **Reply #39 on:** October 04, 2011, 03:39:36 PM »

Sup Nate.

I'm Nate.