Author Topic: Gaz's Garage (Read 99318 times)

Gazea2 · « **Reply #680 on:** February 02, 2011, 01:53:40 PM »

The setup is basically:

Baseplate anchor -> T connector -> HP Ztek + Weapons

There's also 4 pinks in there. The chassis is WAY too big.

NFX · « **Reply #681 on:** February 02, 2011, 01:57:41 PM »

You're right. You could easily use a Blackvolt instead. And you could just use a 20cm extender for the drive and weaponry, save another 3kg either side.

090901 · « **Reply #682 on:** February 02, 2011, 02:05:53 PM »

The wheels seem to be in front of the weapons.

Naryar · « **Reply #683 on:** February 02, 2011, 05:11:06 PM »

Pwn builds better chassis than that...

Pwnator · « **Reply #684 on:** February 03, 2011, 03:05:30 AM »

Quote from: Naryar on February 02, 2011, 05:11:06 PM

Pwn builds better chassis than that...

You should've seen the chassis from my BTTB 3 prototype before I recycled an old one. The end result is pretty much as ugly as BBros' ALARM prototype. :P

Gazea2 · « **Reply #685 on:** February 11, 2011, 12:42:45 PM »

Meh. I need inspiration. I have no clue what to build and, now that I have the time to build something, can't build anything decent.

Reier · « **Reply #686 on:** February 11, 2011, 12:43:29 PM »

Welcome to my world.

freeziez · « **Reply #687 on:** February 11, 2011, 12:46:59 PM »

Quote from: Reier on February 11, 2011, 12:43:29 PM

Welcome to my world.

A terrible world to be in.

martymidget · « **Reply #688 on:** February 11, 2011, 01:19:09 PM »

Build a HW HS/hammer hybrid. :P

Scorpion · « **Reply #689 on:** February 11, 2011, 01:39:30 PM »

Quote from: martymidget on February 11, 2011, 01:19:09 PM

Build a HW HS/hammer hybrid. :P

lolno, terrible idea, although i'm sure you knew that XD
Build....a wedgeless spinner ;P

martymidget · « **Reply #690 on:** February 11, 2011, 02:01:27 PM »

Quote from: Scorpion on February 11, 2011, 01:39:30 PM

Quote from: martymidget on February 11, 2011, 01:19:09 PM
Build a HW HS/hammer hybrid. :P
lolno, terrible idea, although i'm sure you knew that XD
Build....a wedgeless spinner ;P

What, so build a 36HS?:P Wedged spinners are less common in stock (yay iron filings:D)

My idea is so much better. More of a challenge to get right. :P

Scorpion · « **Reply #691 on:** February 11, 2011, 03:09:53 PM »

Quote from: martymidget on February 11, 2011, 02:01:27 PM

Quote from: Scorpion on February 11, 2011, 01:39:30 PM
Quote from: martymidget on February 11, 2011, 01:19:09 PM
Build a HW HS/hammer hybrid. :P
lolno, terrible idea, although i'm sure you knew that XD
Build....a wedgeless spinner ;P

What, so build a 36HS?:P Wedged spinners are less common in stock (yay iron filings:D)

My idea is so much better. More of a challenge to get right. :P

lolfail, i didn't realise this was stock, i'm too used to my DSL land ;P
And no, HS hammer's still daft, how about.....a stock drum

Gazea2 · « **Reply #692 on:** February 12, 2011, 05:49:01 AM »

I think I'm gonna go with the HW HS/hammer hybrid. Hopefully it won't fail... >_>

090901 · « **Reply #693 on:** February 12, 2011, 08:15:36 AM »

I would try a HS side hammer one.

Scorpion · « **Reply #694 on:** February 12, 2011, 05:33:34 PM »

Quote from: 090901 on February 12, 2011, 08:15:36 AM

I would try a HS side hammer one.

Yeah, that COULD be made somewhat effective.

Gazea2 · « **Reply #695 on:** July 03, 2011, 08:03:50 AM »

244 kgs, 2 HP Z-teks, 2 RADs, 1 Nifty w/ control board stacked in. Nearly air-tight.

Vertigo · « **Reply #696 on:** July 03, 2011, 08:05:46 AM »

Nice Whirlpool clone :D

You should enter this

Gazea2 · « **Reply #697 on:** July 03, 2011, 08:08:21 AM »

I have a few MWs kicking around so, sure, I'll send you a bot soon.

Vertigo · « **Reply #698 on:** July 03, 2011, 08:24:47 AM »

Great :D

Somebody · « **Reply #699 on:** July 03, 2011, 09:08:19 AM »

Gazea is back yaaaaaaay