« previous next »
Pages: 1 [2] 3 4   Go Down

Author Topic: Ariqhad's showcase (mostly walker)  (Read 10743 times)

Offline ariqhad

  • Antweight
  • Posts: 26
  • Rep: 1
  • ('-'
    • View Profile
    • Awards
Re: Ariqhad's showcase
« Reply #20 on: December 12, 2009, 09:55:21 PM »
ummm.. hehehhe the weight is 796.6....

... and then, this is the third version... and the best bot of mine..... ^^
DontCare MK III



« Last Edit: December 12, 2009, 11:21:31 PM by ariqhad »
Logged

Offline JoeBlo

Re: Ariqhad's showcase
« Reply #21 on: December 13, 2009, 01:16:30 AM »
nice work on how shallow the wedge is

make sure those wedges are even

my only suggestion is maybe use razors instead of irons and try and stack in another 2 black batts (since im assuming there is only 2)

might be tricky but you would have a good robot on your hands if you managed it

with the extra weight maybe even a second set of HPZ drive on it ?

make sure you keep a copy of the original though  ;)
Logged

Offline The Ounce

  • *
  • Posts: 1256
  • Rep: 4
  • Up and about
    • View Profile
    • Awards
Re: Ariqhad's showcase
« Reply #22 on: December 13, 2009, 01:54:42 AM »
Actually, popups can work well enough with just 2 Supervolts, but seeing how it has more than 2 DDTs, I would go for 3.

And has anyone told you to get Starcore 4 alpha?  It would also help you to improve.
Logged
Tournament Record: 94 Wins - 50 Losses
Challenge Record: 2 Wins - 2 Losses

Offline Somebody

  • *
  • Posts: 7201
  • Rep: 13
  • CP: +2
    • View Profile
    • Awards
Re: Ariqhad's showcase
« Reply #23 on: December 13, 2009, 10:01:58 AM »
Tttttime for Starcore 1 I think.
Logged
I built that big robot on that TV show that time

Offline Naryar

  • Posts: 23278
  • Rep: 20
  • hybrids oui oui
    • http://www.youtube.com/us
  • Awards BOTM Winner
    • View Profile
    • Awards
  • Skype: TheMightyNaryar
Re: Ariqhad's showcase
« Reply #24 on: December 13, 2009, 10:31:30 AM »
^^ Definitely.
Logged

Offline ariqhad

  • Antweight
  • Posts: 26
  • Rep: 1
  • ('-'
    • View Profile
    • Awards
Re: Ariqhad's showcase
« Reply #25 on: December 14, 2009, 02:01:08 AM »
oh, i have starcore 3.0, and my bot barely survive against those monster...
and, i have upgraded both, my walker and the second popup ^^..

Walker MK II.V





hahahaha, i love this version.... but its not as springy as its predecessor...

then, this..
DontCare MK III.V
i cant stack another batt, because its too heavy...

now it spend only 66 kgs for stacking the ddt and hpzmotor....

maybe this will be the final version...

wohoo!!! 2 hit ko, in 9 second...

Logged

Online Pwnator

  • *
  • Posts: 6676
  • Rep: 15
  • Awards BOTM Winner
    • View Profile
    • http://pwnator.tumblr.com
    • Awards
  • See profile for gamer tags: Yes
Re: Ariqhad's showcase
« Reply #26 on: December 14, 2009, 02:22:48 AM »
Rotate the drive motors 90 degrees and it'l move around better. :D

Also, if you do get that black stacked, remove the pinks and add more razors (but the the extender-to-extender fashion, not the Y-connector attachment). :D
Logged
Clash Cubes 1 - Grey Matter (Runner-Up)
King of Karnage - Sideshow Freak (Runner-Up, Best Engineered)
Rust In Pieces - Paper Cut 3 (Grand Champion, Most Dangerous Bot)
Wheely Tag Tournament - Ion Thruster (Grand Champion, along with Ounces' DiSemboweLment)
UK vs USA - Dark Striker (Grand Champion)
Rust In Pieces 2 - Claymore (Runner-Up, Favourite Bot)
BBEANS 6 - Infection 4 (Runner-Up)
RA2 Team Championships - Serious Business, Skeksis (Runner-Up, along with Scrappy, S_M, and Badnik)
RA2 Team Championships 2 - The Other Stig (Runner-Up, along with Scrappy, S_M, Badnik, 090901, and R1885)
Replica Wars 3 - Abaddon (Runner-Up, Luckiest Bot)
BroBots - wheebot & yaybot (Runner-Up)
Robo Zone 2 - Dipper (4th place, Survival Champion, & Best Axle Bot)
ARBBC - The Covenant (3rd place, BW Rumble Winner, Most Feared BW)

Offline Reier

  • Rieir
  • *
  • Posts: 8569
  • Rep: 8
  • I GOT 3RD IN RAW1
    • https://www.youtube.com/c
  • Awards old BOTM Winner
    • View Profile
    • Awards
Re: Ariqhad's showcase
« Reply #27 on: December 14, 2009, 09:57:00 AM »
This guy could be a top builder very soon.
Logged
Quote from: Redalert on December 17, 2018, 10:50:05 AM
ALERT- Another WS coming up...
voted best bot builder two times and counting babayy. the best ra2 builder who has never won an actual tournament match
ReiAI pack for Ironforge
My drawings, and my webcomics
Why online PVP will save RA2
The problem with competitive IRL in RA2
Quote from: Naryar on May 05, 2015, 03:50:31 PM
I'm fine with hugging reier

Offline JoeBlo

Re: Ariqhad's showcase
« Reply #28 on: December 14, 2009, 10:26:54 AM »
 :mrgreen:  the walker looks really awesome now 
Logged

Offline DuckRA2

  • *
  • Posts: 1006
  • Rep: 1
    • View Profile
    • Awards
Re: Ariqhad's showcase
« Reply #29 on: December 14, 2009, 11:48:26 PM »
go get the 4th starcore, or pys ai pack, no point wasting time on easy stuff
Logged

Offline ariqhad

  • Antweight
  • Posts: 26
  • Rep: 1
  • ('-'
    • View Profile
    • Awards
Re: Ariqhad's showcase
« Reply #30 on: December 15, 2009, 12:14:16 AM »
okay, ill download the starcore v4. but im staying at my friend's house right now.. , and i have created another bot...
Bot - Cmacher
its has 42 razor tip..( i have learned effe glitch w!! ^^) and i only used 1 snapper +4 bpa for stacking alltogether :D


Logged

Offline JoeBlo

Re: Ariqhad's showcase
« Reply #31 on: December 15, 2009, 02:29:21 AM »
the plows would be a load more useful as side protection

shrinking some space might be useful too 
Logged

Online Pwnator

  • *
  • Posts: 6676
  • Rep: 15
  • Awards BOTM Winner
    • View Profile
    • http://pwnator.tumblr.com
    • Awards
  • See profile for gamer tags: Yes
Re: Ariqhad's showcase
« Reply #32 on: December 15, 2009, 02:41:28 AM »
Good job on the eFFeing. One supervolt is enough to power 4 HPZs, so just remove one and shrink the chassis. Also, rammers and its hybrids should be invertible, so remove the plows and add wedges (since most of the HW types use wedges). And again, rotate the drive motors 90 degrees so the flat side is parallel to the ground. Then swap the grannies to rubbers and you can use the extra weight to increase the weapon count or upgrade the weapons (irons or 12-kg axes). :D
Logged
Clash Cubes 1 - Grey Matter (Runner-Up)
King of Karnage - Sideshow Freak (Runner-Up, Best Engineered)
Rust In Pieces - Paper Cut 3 (Grand Champion, Most Dangerous Bot)
Wheely Tag Tournament - Ion Thruster (Grand Champion, along with Ounces' DiSemboweLment)
UK vs USA - Dark Striker (Grand Champion)
Rust In Pieces 2 - Claymore (Runner-Up, Favourite Bot)
BBEANS 6 - Infection 4 (Runner-Up)
RA2 Team Championships - Serious Business, Skeksis (Runner-Up, along with Scrappy, S_M, and Badnik)
RA2 Team Championships 2 - The Other Stig (Runner-Up, along with Scrappy, S_M, Badnik, 090901, and R1885)
Replica Wars 3 - Abaddon (Runner-Up, Luckiest Bot)
BroBots - wheebot & yaybot (Runner-Up)
Robo Zone 2 - Dipper (4th place, Survival Champion, & Best Axle Bot)
ARBBC - The Covenant (3rd place, BW Rumble Winner, Most Feared BW)

Offline ariqhad

  • Antweight
  • Posts: 26
  • Rep: 1
  • ('-'
    • View Profile
    • Awards
Re: Ariqhad's showcase
« Reply #33 on: December 15, 2009, 05:49:56 AM »
oh.. since it was done on my friend's computer, hes the one who chose teh parts. while im the one who build the bot. i'll fix that later at home...

----------------------------------
okay, i've upgraded all of my bot.. but, i got drift problem when im using rubber wheel...

1. DontCare MK IV


Weight : 792.6
-> 12 Razor
-> 2 wedge
-> 6 ddt
-> 4 Hpz
2. Cmacher MK I.V
uh, 1 black batt isnt enough for me...


weight : 768.8
-> 34 Razor
-> 2 Snowplow
-> 4 hpz
i hate the design..
3. Cmacher MK II


Weight : 798.1
-> 3 snow plow
-> 30 razor
-> 4 iron
-> 1 ddt
no wasted space!!
which one is better? the mk I.V or This??

Bonus... failed project..... XD
Scrap # 12


hahahahah...  12 times, failure..
« Last Edit: December 15, 2009, 08:44:41 AM by ariqhad »
Logged

Offline lloopp D lloopp

  • Ultra Heavyweight
  • Posts: 1754
  • Rep: 1
  • having a hard time holding these alligators down
    • View Profile
    • Awards
Re: Ariqhad's showcase
« Reply #34 on: December 15, 2009, 09:55:39 AM »
Oh,well at least it looks cool.:P
Logged
Quote from: Virus Bomb on June 17, 2013, 09:24:30 PM
4 Brook moo moo moo moo moo moo how old was the movie food for Louis Missouri man hustle full moon eager for blow blow

currently 2-0 vs Clickbeetle in tournaments, the streak lives on
16th overall in BBEANS standings
runner up for best rookie award in BBEANS6
teamed up with jack daniels that one time
did okay in Clash Cubes 3 i guess
pound 4 pound the dreamiest gtm member

Online Pwnator

  • *
  • Posts: 6676
  • Rep: 15
  • Awards BOTM Winner
    • View Profile
    • http://pwnator.tumblr.com
    • Awards
  • See profile for gamer tags: Yes
Re: Ariqhad's showcase
« Reply #35 on: December 15, 2009, 10:09:46 AM »
You're having a drifting problem because the collision meshes of the drive don't line up with the ground. Rotate the drive motors 90 degrees so that the flat side is facing the ground.

As for Scrap #12, you'll find that adding a front and a rear stabilizer changes everything. :D
Logged
Clash Cubes 1 - Grey Matter (Runner-Up)
King of Karnage - Sideshow Freak (Runner-Up, Best Engineered)
Rust In Pieces - Paper Cut 3 (Grand Champion, Most Dangerous Bot)
Wheely Tag Tournament - Ion Thruster (Grand Champion, along with Ounces' DiSemboweLment)
UK vs USA - Dark Striker (Grand Champion)
Rust In Pieces 2 - Claymore (Runner-Up, Favourite Bot)
BBEANS 6 - Infection 4 (Runner-Up)
RA2 Team Championships - Serious Business, Skeksis (Runner-Up, along with Scrappy, S_M, and Badnik)
RA2 Team Championships 2 - The Other Stig (Runner-Up, along with Scrappy, S_M, Badnik, 090901, and R1885)
Replica Wars 3 - Abaddon (Runner-Up, Luckiest Bot)
BroBots - wheebot & yaybot (Runner-Up)
Robo Zone 2 - Dipper (4th place, Survival Champion, & Best Axle Bot)
ARBBC - The Covenant (3rd place, BW Rumble Winner, Most Feared BW)

Offline JoeBlo

Re: Ariqhad's showcase
« Reply #36 on: December 15, 2009, 10:11:58 AM »
Quote from: ariqhad on December 15, 2009, 05:49:56 AM
okay, i've upgraded all of my bot.. but, i got drift problem when im using rubber wheel...

Z-Teks are hexagons so you need the flat side to face the ground, as the pointed side will make contact with the ground and drift the robot
Logged

Offline Reier

  • Rieir
  • *
  • Posts: 8569
  • Rep: 8
  • I GOT 3RD IN RAW1
    • https://www.youtube.com/c
  • Awards old BOTM Winner
    • View Profile
    • Awards
Re: Ariqhad's showcase
« Reply #37 on: December 15, 2009, 10:44:51 AM »
I like this guy.
Logged
Quote from: Redalert on December 17, 2018, 10:50:05 AM
ALERT- Another WS coming up...
voted best bot builder two times and counting babayy. the best ra2 builder who has never won an actual tournament match
ReiAI pack for Ironforge
My drawings, and my webcomics
Why online PVP will save RA2
The problem with competitive IRL in RA2
Quote from: Naryar on May 05, 2015, 03:50:31 PM
I'm fine with hugging reier

Offline ariqhad

  • Antweight
  • Posts: 26
  • Rep: 1
  • ('-'
    • View Profile
    • Awards
Re: Ariqhad's showcase
« Reply #38 on: December 15, 2009, 04:11:22 PM »
oh...okay then.. i have to change my stacking method..
Logged

Offline ariqhad

  • Antweight
  • Posts: 26
  • Rep: 1
  • ('-'
    • View Profile
    • Awards
Re: Ariqhad's showcase
« Reply #39 on: December 15, 2009, 04:34:17 PM »
ugh... at first i didnt understand.. why i should  rotate the motor.. DX sorry
« Last Edit: December 16, 2009, 12:02:26 AM by ariqhad »
Logged
Pages: 1 [2] 3 4   Go Up
« previous next »