This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Messages - Dark-Al
Pages: 1 ... 12 13 14 15 16 17 18 [19] 20 21 22 23 24 25 26 ... 36
361
« on: August 24, 2017, 10:21:26 AM »
That new miniature Beta motor will defiantly come in handy for future IRL building. But to the point, what else do you have planned for your new version of DSL? I'm aware that this is a bit of a stupid question, due to you still thinking of ideas or you may end up recycle some ideas from the DSL 3 beta like the SHW class etc. But this is just out of curiosity of what else you may have planned apart from what you listed?
That's for me to know and you to find out. 
Fair enough for me. Still, that's something to look forward to.
362
« on: August 24, 2017, 09:23:12 AM »
That new miniature Beta motor will defiantly come in handy for future IRL building. But to the point, what else do you have planned for your new version of DSL? I'm aware that this is a bit of a stupid question, due to you still thinking of ideas or you may end up recycle some ideas from the DSL 3 beta like the SHW class etc. But this is just out of curiosity of what else you may have planned apart from what you listed?
363
« on: August 23, 2017, 04:35:49 PM »
Well, don't know about you guys. I'm off to university next month to start a new chapter in life after receiving the grades from my A levels, I needed to go to university. The course I'm doing may be something out of the blue for me being Computer games design, but it'll be worth a good shot at the course that I'm doing.
I can only say, Good luck!
Thanks for the support. I'm unsure how much free time I'll have a university, but if I'm enjoying the course at least I'm making the most of it.
364
« on: August 23, 2017, 03:23:59 PM »
Well, don't know about you guys. I'm off to university next month to start a new chapter in life after receiving the grades from my A levels, I needed to go to university. The course I'm doing may be something out of the blue for me being Computer games design, but it'll be worth a good shot at the course that I'm doing.
365
« on: August 22, 2017, 05:03:40 AM »
 Despite me not using many good memes, I happen to have some meme knowledge to get this score. Edit: One last thing. When the questionnaire shows a meme and asks you in your ow opinion if it's good or not. I find this vague, do even disagree with the meme being good because either the meme offends you, or it's poorly made for a meme? It can be either but still vague.
366
« on: August 20, 2017, 12:31:25 PM »
DSL-IRL HW, because Robot wars & Battlebots, also Retooled was a mistake
Look TGM. I know that this was said back in the first thread that I looked over if you don't remember, but I remember that some users have been saying that they don't want IRL building in an official tournament. For the main reason being the sheer amount of IRL tournaments that happen around the time, as well as today with GTM Robogames, the sheer increase in IRL builders/users and the over dominants of IRL building as a whole . If the board uses IRL constantly in tournaments and in an forum official tournament , the whole forum will just be a swamp full of IRL building and kills the variety of many of the Meta-games including Stock. So by promoting other classes, it add the variety and encourages people to build into different games and meta classes before being consumed by IRL Bot building. This may be different with Geice and he may allow it, but I doubt some non-IRL building users will want IRL in a meta-game class for this tournament.
367
« on: August 20, 2017, 03:33:42 AM »
getting whatever schlick was supposed to send the prizes to do so would be a good start
Well, you made the prizes for the first tournament and I not 100% sure if the winners did receive any of the prizes apart from the custom rank they won. They might of received the prizes, but I never heard anything about them using them or receiving them. Also, if you (Geice or someone else) were to run another GTMCS, not only I would like to see what Yugitom had planned from the last time like the planned rumbles including the SFTW rumble. But I have thought of some ideas for the meta-games which doesn't include IRL: DSL-S Lightweight, Ironforge-S MW and Stock HW.
368
« on: August 19, 2017, 12:35:04 PM »
Time for another DSL-S build For Badger's Tournament. I'm aware that this bot isn't finished and it's been put together in about 10-15 mins, but I really don't know where I go with this bot in making this better or throwing it in the bin and starting over.. So in a nutshell, I need advice on finishing this bot:   Has Titanium 3 Armour, has Three long black batteries and before you lamb-blast me on it won't move and such, this one does and won't destabilize.
369
« on: August 02, 2017, 04:10:48 PM »
I love the work that you done on your arena. With the colours of the CPZ and how you added the Robots to make the scene more lively, it feels like a perfect fit.
370
« on: August 02, 2017, 03:37:37 AM »
Time for another month of my verdicts and guesses:
1. Got me having a few laughs, but nothing special.
2.I like the concept, but there are a few noticeable, unignorable flaws: not only the flipper is under-powered, but the bot itself is underweight by 48.8Kg. The weight could of been used on something like more flipping power. Still nice work on the chair itself.
3. Got to love the extender work for the Toaster. Despite reminding me of a upside down bee for the front face, the concept is well excuted.
4. More of the lines of being so okay, this isn't worth taking about.
5. I can see that maybe Neon or Guldenflame may of decided to have a go. The PlayStation is well built, but I sense an overuse of the magic wand tool, instead of the marquee tool in the cropping process.
6. This Splash looks like it was made by Mr AS' and Asbesto's love child, and the child was retarded. As turns out, Asbesto did make an entry but it was too late to add to the poll. So it had to be some Meme master like either Playzooki, Mr AS or Enigma.
7. Yet again another so okay, it's not worth taking about entry. I know this bot is the only computer in this month's BOTM, but this entry is just missing a little TLC on the bot itself. For starts, the builder could of try to component skin the Keyboard's Armour plate to make it look like a key board interface if they had the time. But the computer screen is well skin though.
8. Yes, I can see that this bot was deliberately made to be a piece of crap. Despite appearing like Crap by being underweight, it's still tough and has decent weaponry.
Well another BOTM with more so average, it's ok entries. I had a few laughs with some of these entries, but with all these average entries, it's going to be hard to pick the one that sticks out. But, I may have one idea of who I'm going to vote for.
371
« on: August 01, 2017, 10:29:22 AM »
Seeing robots that get caught in the wall like burns when I pee, makes me want to shout "Wall"! for no real reason other than for the pure enjoy of shouting it when this happens. Still, love how this tournament is going so far.
sounds like you should see a doctor if it burns when you pee. .
Good to see youre putting videos out on a constant pace.
This was meant to be a shout out to the Robogames 2017 stream when everyone would shout "Wall!" to what I said in my quote. But good call.
372
« on: August 01, 2017, 10:07:31 AM »
Seeing robots that get caught in the wall like burns when I pee, makes me want to shout "Wall"! for no real reason other than for the pure enjoy of shouting it when this happens. Still, love how this tournament is going so far.
373
« on: July 30, 2017, 10:39:40 AM »
he just needs to change the E wedge to a small wedge, he doesnt need double wedges as he has a long enough wedge to counter that
I'm aware that you don't need a double wedge, if you have a good first wedge. The picture was meant to show about how to place out the snappers to get the best wedge, but I apologies for the poor example of a picture.
374
« on: July 30, 2017, 03:20:50 AM »
(Image removed from quote.)
My first attempt at stacking nifty's, just lurked a little. May have plans to improve messiah
I know Badnik did point out about using a small wedge over an Emergency wedge. But from the angle of your photo, your wedge set-up looks too high up to be classed as a good wedge. Try lowering the starting position of the wedge down near to the lower line of the Chassis' bracket wedge or play around with the wedge high if you wish to achieve a lower wedge. But just don't leave the bot hanging off it's wheels. Alternatively, try placing in the snapper in the chassis at it's lowest connection point by the main part of the snapper itself, this will allow you to get the wedge in as low as possible without having the worries of not being able of getting the wedge in as low as possible and will save a bit of room in your chassis for you to tighten up or possibly add a Supervolt. If you wanted an example of this alternative idea, this should give you a clue on how to make a good wedge set up: 
375
« on: July 28, 2017, 12:20:09 PM »
Jellyfish. The arm moves on an invisible burst piston, geared down to be as slow as possible and still be able to move.
(Image removed from quote.)
Pretty nice Sonny. Seeing that you manged to skin the white, round extenders to fit in a few coloured spots onto the extenders themselves for the classic looks for the Bot's pipes itself. Bloop.
376
« on: July 26, 2017, 10:34:06 AM »
thats what i saw in the picture, and in your other events, maybe something got corrupt. I will download the link you have above and see if it is different.
Send me a download link via PM and I'll check it then.
377
« on: July 26, 2017, 02:45:40 AM »
Sorry to bring this up, if you saw the picture of Unreal Cerberus on the splash, the picture isn't the true set-up of the bot itself, possibly due to the loading of the skirt hinge that connects the skirts together. If you were curious about the true set up for my bot, I have a screenshot to prove it: 
378
« on: July 25, 2017, 04:14:19 PM »
P.S Dark AL's wheels dont touch the ground.
Are you sure about that? I tested the new wheels and they do work with the design.
Not from what iv seen.
I sent you two models of the same Robot with different wheels. One with Shiny hubs wheels and the other with Pussycat wheels. Which one are you using?
That just begs the question as to why you didn't test it beforehand.
Before you say I didn't test it Mr. AS. In truth I have tested my bot before hand, and didn't in-counter any of the problems I had with Malleus. But I never test the bot with an AI code. Also after resent testing, the bot's main problem lies within the stability due to which one of the motors for it's weapon must be running in the opposite direction in order for this stability to happen. And yes Roboteer, the bot can move, but due to the instability of it's weapons, it spirals out of control very quickly. Edit: If you feel you can fix this problem, here's the bot: https://gametechmods.com/Robot_Exchange/DSL_HW/Dark-Al_Unreal%20Cerberus%20.bot
379
« on: July 25, 2017, 03:57:11 PM »
P.S Dark AL's wheels dont touch the ground.
Are you sure about that? I tested the new wheels and they do work with the design.
Not from what iv seen.
I sent you two models of the same Robot with different wheels. One with Shiny hubs wheels and the other with Pussycat wheels. Which one are you using?
380
« on: July 25, 2017, 03:53:05 PM »
P.S Dark AL's wheels dont touch the ground.
Are you sure about that? I tested the new wheels and they do work with the design.
Pages: 1 ... 12 13 14 15 16 17 18 [19] 20 21 22 23 24 25 26 ... 36
|
Show Posts