Author Topic: GF93's Stock Toolshed (Read 19631 times)

GoldenFox93 · « **on:** May 02, 2010, 04:18:01 PM »

Wow, how I managed to accumilate over 900 posts without one of these, I'll never know.
Anyway, I'll post something in a few moments. I just need to get pictures.

G.K. · « **Reply #1 on:** May 02, 2010, 04:43:06 PM »

As soon as you showcase something, you're in BTTB.

GoldenFox93 · « **Reply #2 on:** May 02, 2010, 04:45:53 PM »

Quote from: G.K. on May 02, 2010, 04:43:06 PM

As soon as you showcase something, you're in BTTB.

Thanks for pointing it out! Anyway, I've been waiting a long time to showcase something. And here it is-

RUSTED SYRINGE

And insides-

As you've probably guessed already, Rusted Syringe is a rammer. It's pretty quick, and has three rows of pointy spikes on black bars, so is durable as well as powerful.
Armour is DSA.

TriTon · « **Reply #3 on:** May 02, 2010, 04:55:11 PM »

You only need 2 blacks for this, and make the chassis a bit smaller.

Stagfish · « **Reply #4 on:** May 02, 2010, 05:05:38 PM »

Is it invertable?

GoldenFox93 · « **Reply #5 on:** May 02, 2010, 05:06:31 PM »

Quote from: TriTon on May 02, 2010, 04:55:11 PM

You only need 2 blacks for this, and make the chassis a bit smaller.

I appreciate how you see it Triton, but I put the extra battery in there as a means of making sure it runs effectively, as well as to prevent it overbalancing and lifting the rear wheels off the ground (It happened to a previous version of this machine). Besides, it was also used as part of the "Build to the weight limit" rule I see so often on here.

But thanks anyway. I'll see where I can implement them in a different version.

Quote from: Stagfish on May 02, 2010, 05:05:38 PM

Is it invertable?

And Stag, yes it is invertable. It took a bit of adjusting to get it that way, mind you

Sage · « **Reply #6 on:** May 02, 2010, 07:53:37 PM »

You only need ONE black for this.

If spinmotors take 100 amps each, and blacks give out 800, then 6 motors only need 1 black. For 36HS you want two because the spin motors have a lot of weight on them and you need max power for longer, but with rammers you really only need the first ram to be at max.

Use the rest of the weight on weapons or armor.

NFX · « **Reply #7 on:** May 02, 2010, 08:06:33 PM »

Quote from: GoldenFox93 on May 02, 2010, 05:06:31 PM

I put the extra battery in there as a means of making sure it runs effectively, as well as to prevent it overbalancing and lifting the rear wheels off the ground

Remove the battery at the front. =)

Also, I've noticed that in the bot lab, as you're selecting the height of your chassis, if you slide the slider all the way down, then slowly move it upwards six clicks, that is almost exactly the same height as the Z-Teks, so that would make your bot invertible, even with rubbers.

Sage · « **Reply #8 on:** May 02, 2010, 08:09:07 PM »

@ NFX:

You only need 5 clicks.

NFX · « **Reply #9 on:** May 02, 2010, 08:14:50 PM »

Do you? I tried that once and it didn't work. Perhaps I'm doing it wrong.

Squirrel_Monkey · « **Reply #10 on:** May 03, 2010, 04:36:00 AM »

The bottom level can vary by one click.

Naryar · « **Reply #11 on:** May 03, 2010, 05:56:00 AM »

While 1 black will power this fully, it clearly is insufficient for total battery power.

3 is too much though, just use 2 (or 1 black and 1 nifty)

GoldenFox93 · « **Reply #12 on:** May 03, 2010, 07:56:21 AM »

Thanks for the tips, guys. Maybe I'll post an improved version at some point.

But for now, I'll post something new in a few moments.

GoldenFox93 · « **Reply #13 on:** May 07, 2010, 02:40:54 PM »

BUMP

Right. It's a bit overdue, but here's my second showcased heavyweight-

LANDMINE (And yes, I finally updated my Starcore = P)
I think this one's pretty good. Sure it's underweight, but it's pretty quick, well-armoured at the front, and can beat up the Starcore 2 AI convincingly, being able to take out most of the heavyweights in between 1-3 hits. Armour is DSA.

And there's an inside view. Though it might not look like it, those rubber wheels allow it to run upside down. The spikes allow it to self-right, too.

Although I think it's pretty good, I'd like to put a third plate in the gap at the front, at the same level as the others. Any tips?

Gazea2 · « **Reply #14 on:** May 07, 2010, 02:44:47 PM »

Stick to the weight limit. At the moment, other bots have up to 150kg+ more weapons than you. You can shrink the chassis by stacking the blacks and overlapping the wheels and the Hp Zteks via axle loading. Add more weapons on the DDTs and add some side protection. HSes will tear them apart.

Sage · « **Reply #15 on:** May 07, 2010, 03:16:06 PM »

Just add armor dude. As much as you can.

GoldenFox93 · « **Reply #16 on:** May 07, 2010, 04:45:13 PM »

Quote from: Sage on May 07, 2010, 03:16:06 PM

Just add armor dude. As much as you can.

OK guys, I'll see what I can put on. I actually based its appearance on Rebel from Starcore 3.

NFX · « **Reply #17 on:** May 07, 2010, 05:01:56 PM »

Are you sure you don't mean Rebel? That's who I based the original Halestorm around. =P

But try to stack the Blackvolts, definitely.

GoldenFox93 · « **Reply #18 on:** May 07, 2010, 06:05:02 PM »

Quote from: NFX on May 07, 2010, 05:01:56 PM

Are you sure you don't mean Rebel? That's who I based the original Halestorm around. =P

But try to stack the Blackvolts, definitely.

Oh right. Must be getting senile in my old age, don't you think?

Anyway, I can assure you I did try to stack the batteries, but it just didn't seem to work. I can stack pinks, but not the other two to any particular effect.

NFX · « **Reply #19 on:** May 08, 2010, 04:30:08 AM »

I'm pretty sure you can stack any batteries, it's just a case of trial and error. I once managed to stack 3 Niftys in one spot. =)