Author Topic: LiNcK'z Botz (Read 96350 times)

Jack Daniels · « **Reply #660 on:** January 04, 2010, 09:05:33 PM »

can't you put a razor in the center of each disc as well? I think that would be worth ditching a couple beater bars for... the more moving blades you have on those discs the better.

JoeBlo · « **Reply #661 on:** January 05, 2010, 12:59:42 AM »

I made a robot called Meat Tenderizer it used its chassis as locomotion :P

the weapons up the wedges are a really nice idea

the razorstrips might hinder the weapon on Meat Tenderizer though

Pwnator · « **Reply #662 on:** January 05, 2010, 02:14:11 AM »

The tite sheet as a bot holder's a nice touch. Same goes to the side beater bars. :D

But you can get the weight for more weapons if you used flipper segments instead of DSL bars and anglers. And swap the two tite sheets for a single tite sheet. Much stronger for the same weight, though you'll lose the awesome side beater bars. But at least you can spend the weight on stronger weapons. :D

Naryar · « **Reply #663 on:** January 05, 2010, 05:35:57 AM »

Apart from the fact that half-Ti sheets fail at armor (1400 or 1500 HP only for 15 kg) and it is shamefully overpowered, it looks good.

Reier · « **Reply #664 on:** January 05, 2010, 08:38:05 AM »

Looks cool.

LiNcK · « **Reply #665 on:** January 05, 2010, 02:41:17 PM »

Quote from: System32 on January 04, 2010, 07:34:09 PM

The Beater Bars are a Nice touch.

Do they guide the opponent into the wedge?

The beater bars along with the Tite sheets hold the opponent :3

(Ill get a battlepic soon)

Quote from: Jack Daniels on January 04, 2010, 09:05:33 PM

can't you put a razor in the center of each disc as well? I think that would be worth ditching a couple beater bars for... the more moving blades you have on those discs the better.

Nope, But i can put an Iron Spike on it...

The problem is that IDK if the motors can hold 10KGs more & Still spin fast :P

Quote from: Pwnator on January 05, 2010, 02:14:11 AM

The tite sheet as a bot holder's a nice touch. Same goes to the side beater bars. :D

But you can get the weight for more weapons if you used flipper segments instead of DSL bars and anglers. And swap the two tite sheets for a single tite sheet. Much stronger for the same weight, though you'll lose the awesome side beater bars. But at least you can spend the weight on stronger weapons. :D

Tried to do that, But only sometimes the wedge on the Hinge goes a bit lower than its supposed to go in the bot lab...

There is when i got the chnce of putting those Tite sheets, And it has never happened again :\

Quote from: JoeBlo on January 05, 2010, 12:59:42 AM

I made a robot called Meat Tenderizer it used its chassis as locomotion :P

the weapons up the wedges are a really nice idea

the razorstrips might hinder the weapon on Meat Tenderizer though

DesTroy4h! is the new version of Meat Tenderizer :P

Also, The tite sheets were too angled in Meat Tenderizer & Big bots couldt really get past them to be destroyed...

And the wedge failed, So the bot failed

LiNcK · « **Reply #666 on:** January 14, 2010, 08:11:31 PM »

Got some battlepics...
The Beater bars dont really do much, They mostly prevent the oponnent from slipping away from the wedges when im turning...
And why would i turn if i already caught the bot?

Well, heres what the halfsheets do:

I wish i could make a fight between 4ft3rZh0cK & DesTroy4h! so i could see who's the best... I think DesTroy4h! is betetr though :P

LiNcK · « **Reply #667 on:** January 14, 2010, 08:54:15 PM »

New Frontal Spinner & Poker: Flatphobia

Inside

Stats:

Armour: Titanium x3
Drive: NPC (Fast) x2
Weapons: Razor Tip x10, Beater Bars (Large) x5

I know its underweight... But IDK what else i could add, Its getting harder & harder to get to 800KG for me
And you guys are making new 5000KG bots...

Whats going on? D:

Pwnator · « **Reply #668 on:** January 15, 2010, 04:30:01 AM »

Add some weapons on top as an active trapper (kinda like Eye Stabber) and change your drive to Technos. With some free weight, protect the drive. :D

Naryar · « **Reply #669 on:** January 15, 2010, 05:16:10 AM »

How many times did i said that both Ti halfsheets and multi's fail at armor unless attached to the baseplate ?

LiNcK · « **Reply #670 on:** January 15, 2010, 11:51:27 AM »

Quote from: Naryar on January 15, 2010, 05:16:10 AM

How many times did i said that both Ti halfsheets and multi's fail at armor unless attached to the baseplate ?

Those multi's have the best lengt...
40cm Extenders are alot bigger, Putting the sheet too far away from the wheels & Stuff...

And IDK what else i could put besides the Ti Sheets... HUGE Full Ti Sheets?

It also doest let me put armour beneath... IDK why :S

G.K. · « **Reply #671 on:** January 15, 2010, 11:54:11 AM »

If you upgrade wheels to Technos then a different extender choice might present itself.

LiNcK · « **Reply #672 on:** January 16, 2010, 07:35:49 PM »

UPDATE

Name changed to: The 5th Way To Die

Another row of spinners was added (Total of 20 Razors)

2 Ant Bats added

Paintjob change (Lower-Right Outside Pic)

I felt a bit creative, So i made a splash for it, Best & only splash i ever made...
Im sure you guys are not gonna like it though, Coz compared with what you guys do, It sucks :P

Outside

Inside

Sparkey98 · « **Reply #673 on:** January 16, 2010, 07:40:42 PM »

what the

do you mean? i don't have DSL, but that does NOT suck
but then again I love all face spinners stock or DSL

Scrap Daddy · « **Reply #674 on:** January 16, 2010, 07:46:24 PM »

I quite like this bot, but a few things need to be fixed.

1. Listen to Naryar. These ramplates suck unless attached directly to the bottom of the chassis.
2. these multiextenders could easily be swapped for something with moar hp like extenders or flipper segments.
3. Those are drive motors. Either switch to the weapon motor ones or use something else.

LiNcK · « **Reply #675 on:** January 16, 2010, 07:47:02 PM »

Quote from: Sparkey98 on January 16, 2010, 07:40:42 PM

what the do you mean? i don't have DSL, but that does NOT suck
but then again I love all face spinners stock or DSL

I mean the Splash, The "Effects"... Like the name on the side & Stuff like that, Nothing RA2 related :P

Edit:
@ Scrap Daddy:
Wich ones are the Weapon ones?
I always use the other TWDRs for Drive, So i thought these were the wepon version..?

LiNcK · « **Reply #676 on:** January 16, 2010, 08:11:11 PM »

I only live to make Naryar happy

Here's the update:

I first planned on putting DSL bars, But 7200 HP for 36 KG (I think) is not fair >:C
So i put the plows, I think its 7500 HP for 25 KG
ANYWAYZ! Its bettah :3

Pwnator · « **Reply #677 on:** January 16, 2010, 09:43:45 PM »

Quote from: LiNcK on January 16, 2010, 08:11:11 PM

I only live to make Naryar happy

That sounded so wrong. XD

Anyway, you don't need the MEs on the discs. Use TWM3Rs and with smart ME placement you won't need the long axles.

But it's better. :D

Sparkey98 · « **Reply #678 on:** January 16, 2010, 09:46:36 PM »

Quote from: Pwnator on January 16, 2010, 09:43:45 PM

Quote from: LiNcK on January 16, 2010, 08:11:11 PM
I only live to make Naryar happy

That sounded so wrong. XD

Anyway, you don't need the MEs on the discs. Use TWM3Rs and with smart ME placement you won't need the long axles.

But it's better. :D

*Shutter Shutter*
also, you don't have to listen to that bot Nazi, he is not always right
he thinks that it only makes sence if it's practical

Scrap Daddy · « **Reply #679 on:** January 16, 2010, 09:50:56 PM »

Quote from: Sparkey98 on January 16, 2010, 09:46:36 PM

Quote from: Pwnator on January 16, 2010, 09:43:45 PM
Quote from: LiNcK on January 16, 2010, 08:11:11 PM
I only live to make Naryar happy

That sounded so wrong. XD

Anyway, you don't need the MEs on the discs. Use TWM3Rs and with smart ME placement you won't need the long axles.

But it's better. :D
*Shutter Shutter*
also, you don't have to listen to that bot Nazi, he is not always right
he thinks that it only makes sence if it's practical

How is not listening to anyone working for you, Sparkles?

*looks at Sparkles' showcase*

Oh right.