Author Topic: LiNcK'z Botz (Read 98162 times)

Doomkiller · « **Reply #300 on:** July 12, 2009, 09:15:53 PM »

Metal hinge wedge is meant to work better so yeah

LiNcK · « **Reply #301 on:** July 12, 2009, 09:38:59 PM »

Ok, Got it.. Thanks :P

Doomkiller · « **Reply #302 on:** July 12, 2009, 09:40:16 PM »

wedge is too high up from the looks of it.....

LiNcK · « **Reply #303 on:** July 12, 2009, 09:53:43 PM »

Yeah, But its not as steep as other Wedges ive seen...
Anyway to put 2 "Sheets" in 1 hinge?

Urjak · « **Reply #304 on:** July 12, 2009, 10:15:10 PM »

Put it lower. The flatter the wedge, the better it tends to perform against other wedges.

Natef · « **Reply #305 on:** July 13, 2009, 01:07:17 PM »

I like the popup

LiNcK · « **Reply #306 on:** July 13, 2009, 01:47:34 PM »

Thanks :P

Ok, Here:

Just a bit lower... Had to change the abts position, Now beneath the 2nd Battlepack there are 3 ants.

Reier · « **Reply #307 on:** July 13, 2009, 02:14:50 PM »

Make it so you don't have to program the hinge action, like this:

AKA really low to the ground, and have a tite plate or something on the front to take the blows. Look @ the popup in my sig.

Naryar · « **Reply #308 on:** July 13, 2009, 02:33:39 PM »

Too slow for being a good popup.

Also you're wasting weight on the weapon extender setup - just make it like Slashback.

LiNcK · « **Reply #309 on:** July 13, 2009, 02:50:49 PM »

Ok, I haave to Re-Make the interior, Its not done but here is the wedge & stuff:

Reier · « **Reply #310 on:** July 13, 2009, 02:54:29 PM »

Wedge is ok, but I would've used a double one. But that's just my style.
You can make the setup a lot lighter on the tite sheet by either a normal 45-degree angler, or a skirt hinge (hinge might be better).

Naryar · « **Reply #311 on:** July 13, 2009, 03:20:21 PM »

Or a polycarbonate extender.

Skirt hinge is the easiest solution, but wobbles.

LiNcK · « **Reply #312 on:** July 13, 2009, 04:33:31 PM »

Finished it, And changed its name... I Re-Made it so many times (Like 7) that i called it: ScrapAtack

Inside

Ouside

Armour: Aluminium x3

The Paintjob took me like 10 mins xD

-The sides are not angled anymore, Only the front part is angled now, Had to do this to setup the Snappers.
-A bit underpowered (I think, 8 Ants & 1 BattlePack)

Weirdo · « **Reply #313 on:** July 14, 2009, 04:08:04 AM »

Quote from: LiNcK;51281

I Re-Made it so many times I don't even remember how many times I re-made it, but its probably around... 7...

Sorry.

Naryar · « **Reply #314 on:** July 14, 2009, 04:13:39 AM »

-FASTER PLZ.
-Chassis shape wastes weight
-Use more battlepacks - they're better for the amp output/weight ratio.

trumpetguy · « **Reply #315 on:** July 14, 2009, 04:20:22 AM »

You do love TMDR3s (or whatever they are called).

Doomkiller · « **Reply #316 on:** July 14, 2009, 04:24:46 AM »

look at my MW true pop up for some ideas, its fast, and almost has full amps so yeah

LiNcK · « **Reply #317 on:** July 14, 2009, 04:37:08 PM »

Quote from: Naryar;51361

-FASTER PLZ.
-Chassis shape wastes weight
-Use more battlepacks - they're better for the amp output/weight ratio.

Ill need an alot bigger chasis to fit 2 NPC Fasts... And i feel lazy today :3

Chassis shape is to protect the extenders (Since they have VERY LOW HP) & to make space for Batts.

Battlepacks dont fit, But im gonna try to distribute the space better :)
(The 2 upper antbats can be changed for Battlepack, Ill try)

LiNcK · « **Reply #318 on:** July 14, 2009, 04:39:01 PM »

Quote from: Naryar;51361

-FASTER PLZ.
-Chassis shape wastes weight
-Use more battlepacks - they're better for the amp output/weight ratio.

Ill need an alot bigger chasis to fit 2 NPC Fasts... And i feel lazy today :3

Chassis shape is to protect the extenders (Since they have VERY LOW HP) & to make space for Batts.

Battlepacks dont fit, But im gonna try to distribute the space better :)
(The 2 upper antbats can be changed for Battlepack, Ill try)

Urjak · « **Reply #319 on:** July 14, 2009, 05:49:05 PM »

You just posted the same thing twice....