Author Topic: LiNcK'z Botz (Read 82817 times)

Flying_Chao · « **Reply #180 on:** June 04, 2009, 05:55:38 PM »

Which way do the hammers spin?

LiNcK · « **Reply #181 on:** June 04, 2009, 05:57:38 PM »

To the front, So the flat part hits the opponent. (Right one clockwise, Left one Counter-Clockwise)
Also, I putted S3 (Or S23) wheels... Tornado's are too tiny & the other is too wide.

I really dont know what wheel is grippy and wich not :S

takatsukiyayoi · « **Reply #182 on:** June 04, 2009, 06:35:19 PM »

Look in the description of each wheel... if it says "grippy" it is.
And TD's wheels are fine for SHWs, S3 wheels are just as bad as slipperbottoms.

LiNcK · « **Reply #183 on:** June 04, 2009, 07:10:26 PM »

Ok, Thanks... But ill leave the S3's, I tried Tornado wheels but it makes the bott go too fast and when it turns it goes KAB00M... Also when it turns with the hammers on it goes KAB00M... But thats other story ^^

I Re-Made it also: Here's v1.5

Naryar · « **Reply #184 on:** June 05, 2009, 04:29:46 AM »

225 kg on an Etek ? You just don't know anything about VS, huh ?

Quote from: takatsukiyayoi

S3 wheels are just as bad as slipperbottoms.

Worse !

philetbabe · « **Reply #185 on:** June 05, 2009, 07:12:56 AM »

this image gives me the vertigo

JoeBlo · « **Reply #186 on:** June 05, 2009, 08:17:58 AM »

do you think you can give screenshots from a bit further away ? I just want to see the whole bot with nothing cut out :-D

LiNcK · « **Reply #187 on:** June 05, 2009, 04:22:06 PM »

Sure... Here it is:

The pic in the lower-right side... Itz a pic of it, Driving sideways ;D
Its a sidevertible ^^ (Somehow)

@ Naryar: The hammers spin s00p4h fast, Make the bot s00p4h unstable, Like i said... You cant turn with the hammers on, it'll crash :P

Doomkiller · « **Reply #188 on:** June 05, 2009, 04:24:17 PM »

take naryars advice. use a perm at least

LiNcK · « **Reply #189 on:** June 05, 2009, 04:33:23 PM »

Putted Tornado Wheelz & a bigger extenser in the front (You know, the polycarbonate one?) Now it doent go to the front when it accelerates with the hammers off, But the Turning problem is still there ^^

And ill see what i can do about the motors, Since i only have 5KG left >_>

LiNcK · « **Reply #190 on:** June 05, 2009, 04:43:58 PM »

Perms = UNREALISTIC... Win..? ;D WIINNNN !!!

And... I'd like u remind you guys:

Quote

No part can intersect another part that couldn't have a slot cut in it in real life. Example: Spinner blade passing through armor plate or chassis=OK. Spinner blade passing through wheel or battery=Not OK

EDIT: I have a question, Is Perm 80 better than the Z-Tekz?
Coz maybe i could put them, Since they're smaller.

Naryar · « **Reply #191 on:** June 05, 2009, 04:56:31 PM »

I have the feeling that your perception of time is altered.

2WD Mag drive with hypnos is fast on a HW, 230 kg of hammers on a 80kg motor spins super fast...

LiNcK · « **Reply #192 on:** June 05, 2009, 05:35:15 PM »

h4mm4h has too much problems... Im using my other candidate for Clash Cubes.

LiNcK · « **Reply #193 on:** June 07, 2009, 07:46:33 PM »

Ok peepz !!! I got it, I GOT IT!!!...
Here's h4mm4h 3T (Dont ask for h4mm4h 2, He was a fail, Also the T stands for "Truck")

Outside

Inside

Statz:

Weight: 1194.1 KG
Armour: Aluminium x10
Drive: TWM3R Drive
Weapons: DSL Hammer (70KG) x6
Atack: Enemy getz close, Enemy goes B00M!

Pwnator · « **Reply #194 on:** June 07, 2009, 08:01:57 PM »

This is still pretty much a fail. :P

Use stronger motors for heavier weapons, in this case I suggest you use a 6-Mag or Dual Perm. And you can use DSL bars instead of tribars if you're short on weight.

LiNcK · « **Reply #195 on:** June 07, 2009, 08:22:51 PM »

I tried to do it with ALOT of motor, But its impossible for me :P
Also, I made the side extenders longer, Soo the Titanium sheet now stops the bot from flipping itself... but it got ALOT wider now, IDC...

New Weight: 1199.1 KG

Pwnator · « **Reply #196 on:** June 07, 2009, 08:27:01 PM »

That's because you're using 4WD. Bar VS aren't supposed to be 4WD. Just use NPCs or NPC Fasts and you'll be fine. And your weapons, no matter how powerful they are, are totally useless if they can't get under the opponent and rip them apart. So add some wedges and use plows instead of the side tite sheets.

Reier · « **Reply #197 on:** June 07, 2009, 08:34:24 PM »

IMO you should make the weapons spin the other way like most other VSs.

Doomkiller · « **Reply #198 on:** June 08, 2009, 03:47:49 AM »

u should be able to use the perms, just use the 132el ones

Naryar · « **Reply #199 on:** June 08, 2009, 05:03:07 AM »

Quote from: Pwnator;42969

This is still pretty much a fail. :P

I agree !