gametechmods
Robot Arena => Tutorials and Tips => Other Tutorials => Topic started by: Redalert on April 18, 2019, 12:38:41 PM
-
Okay, this may seem pointless, but it needs to be discussed.
I've found a working method to axle-loading a Servo motor in Stock, DSL, and IronForge, called "Servo Loading."
You basically do the same setup as you do for snapper loading.
[ This attachment cannot be displayed inline in 'Print Page' view ]
However, this is VERY difficult, especially if you're using the thin body servo, and you have to try multiple times to actually get the servo axle to fly clean off.
I recommend you use the RAD for this glitch. It's easy to fit, and also easy to axle-load.
Once you get the servo axle up and away from the body (or chassis in that matter) go ahead and attach the components as you would when doing the Snapper loading glitch.
-
I doesn't need to be discussed because it's been discovered for more than a decade and a lot of stock bots nowadays make use of this.
https://gametechmods.com/forums/tutorials-and-tips/complete-tutorial-index/ <--- Before you claim any more techniques as your own discoveries, just study that link and maybe you won't attract ridicule from other members.
Locking this before anything worse happens to you.