gametechmods

Robot Arena Matches => Tournaments => Tournament Archives => Topic started by: Badnik96 on November 26, 2010, 05:25:36 PM

Title: Replica Wars 3 (DISCUSSION)
Post by: Badnik96 on November 26, 2010, 05:25:36 PM
NOTE: This is NOT going to start for a while, I just want to confirm that this WILL happen, and also confirm a few rules.

RULES:
-DSL MW, realistic rule applies.

-Bots MUST be replicas of real life bots

-robots MUST work like the real thing

-BFE and cheatbot parts allowed only if it makes the rep more like the real thing (no overpowered reps!)
Say,  if the robot has a very powerful flipper, you can use the Judge burst.  And if you need to make a robot's chassis more like the real thing if  it won't let you, or if you can't fit a component that would make the  rep more realistic, you may use BFE. This will be determined at my  discretion.

-Arena will be The Replica Wars Arena (Ra2T2 arena with saws removed)

-ALL MATCHES are 3 minutes, you get one fight.

-bracket will be 1-on-1 then 4-way then a 4-way final. (32 entries)

-No losers bracket.

-if a match is ended by time running out, then I will decide on who advances based on the robot who overall performed best.

-If   a robot havoks, it gets a free restart ONCE with the remaining   competitors (say if a bot havoks when 2 bots are KO'ed, the match  would  restart with the remaining 2 bots)

-Skinned parts accepted but they must only be reskins. (no TXT editing except for name)

-All In-game glitches allowed if they abide by the realistic rule.

-No more than 4 flails allowed on one robot.

-Your bot cannot be a replica of a bot that is already in a version of DSL (1, 2, or 2.1)
-no 2 people can do the same bot.

-Multibots not allowed.

-In   the case of byes, the 8 seeded bots will get byes first, then the next   highest ranked competitors from RW2, then the rest of the competitors   from RW2.

-Bot updates can be sent until splash is posted, You can send a completely change your entry ONCE.

-Ring spinners (as in robots that have a spinning bar or disc going through the middle of the robot) are allowed as long as nothing but the wheels are passing through the disc.

-Unless your entry is super-wedgy IRL, NO ADDING MCB OR METAL HINGE WEDGES ON YOUR ROBOT!

Seeds for quick reference:
1.Squirrel_Monkey
2.MikeNCR
3.123SaveTheWhales
4.NFX
5.GoldenFox93
6.027 LB
7.S.T.C.
8.Scorpion
Title: Re: Replica Wars 3 (DISCUSSION)
Post by: That Robot is a Spy! on November 26, 2010, 05:26:55 PM
I might enter with a flipper, Atomic.
Title: Re: Replica Wars 3 (DISCUSSION)
Post by: Vertigo on November 26, 2010, 05:27:14 PM
Explosion will make a return :D
Title: Re: Replica Wars 3 (DISCUSSION)
Post by: Enigm@ on November 26, 2010, 05:27:23 PM
I shall enter when this kicks off.
Title: Re: Replica Wars 3 (DISCUSSION)
Post by: GoldenFox93 on November 26, 2010, 05:28:23 PM
Excellent! I'll definitely enter. The Scot and the Primate will be my primary targets  :P
Title: Re: Replica Wars 3 (DISCUSSION)
Post by: Badnik96 on November 26, 2010, 05:30:25 PM
Put up the obligatory poll.
Title: Re: Replica Wars 3 (DISCUSSION)
Post by: That Robot is a Spy! on November 26, 2010, 05:35:21 PM
How about Cedric Slammer?
Title: Re: Replica Wars 3 (DISCUSSION)
Post by: Scorpion on November 26, 2010, 05:45:27 PM
Yeah, i'll definately enter.
I think I already know what i'm gonna enter actually :mrgreen:
Title: Re: Replica Wars 3 (DISCUSSION)
Post by: GroudonRobotWars on November 26, 2010, 05:47:11 PM
Can't wait for this.
Title: Re: Replica Wars 3 (DISCUSSION)
Post by: NFX on November 26, 2010, 05:48:06 PM
PANCAKES.

I mean, yes, I will enter this. And actually fight GF93 this time. >=D
Title: Re: Replica Wars 3 (DISCUSSION)
Post by: GoldenFox93 on November 26, 2010, 05:49:32 PM
PANCAKES.

I mean, yes, I will enter this. And actually fight GF93 this time. >=D
Bring it on, then   :gunz:
Title: Re: Replica Wars 3 (DISCUSSION)
Post by: Badnik96 on November 26, 2010, 05:57:48 PM
:P
Title: Re: Replica Wars 3 (DISCUSSION)
Post by: Enigm@ on November 26, 2010, 07:21:28 PM
Darn, I would've entered Pack Raptors if multibots were allowed.
Title: Re: Replica Wars 3 (DISCUSSION)
Post by: Resetti's Replicas on November 26, 2010, 07:23:15 PM
How many entries maximum?
Title: Re: Replica Wars 3 (DISCUSSION)
Post by: Ben Purse on November 26, 2010, 07:56:50 PM
Going to make a Australian Bot this time. I still wonder if Cunning Plan did not quit what would happen.
Title: Re: Replica Wars 3 (DISCUSSION)
Post by: Preytor_4 on November 26, 2010, 08:03:38 PM
I'll enter, but freeziez will send in my bot.
Title: Re: Replica Wars 3 (DISCUSSION)
Post by: S.T.C. on November 26, 2010, 08:13:58 PM
I'm entering, maybe S.L.A.M.
Title: Re: Replica Wars 3 (DISCUSSION)
Post by: Pwnator on November 26, 2010, 08:17:38 PM
WOOOO DARK POUNDER AGAIN! (Or some other bot made by Dark Forces) XD
Title: Re: Replica Wars 3 (DISCUSSION)
Post by: S.T.C. on November 26, 2010, 08:19:40 PM
WOOOO DARK POUNDER AGAIN! (Or some other bot made by Dark Forces) XD
If something like Dark Pounder enters, I should enter Slicer lol.
Title: Re: Replica Wars 3 (DISCUSSION)
Post by: Preytor_4 on November 26, 2010, 08:30:43 PM
Nevermind, my bot has custom components.
Title: Re: Replica Wars 3 (DISCUSSION)
Post by: Scorpion on November 27, 2010, 02:30:09 AM
Yeah, I think i'm gonna try and enter shredder.
I think it'll be easier to not mess up the skin on that one  :laughing
Title: Re: Replica Wars 3 (DISCUSSION)
Post by: Thyrus on November 27, 2010, 02:39:18 AM
LW sucked. I may try do do something with domeshell parts for series 3
Title: Re: Replica Wars 3 (DISCUSSION)
Post by: NFX on November 27, 2010, 05:43:01 AM
Would I be able to enter Corkscrew Two?
Title: Re: Replica Wars 3 (DISCUSSION)
Post by: Squirrel_Monkey on November 27, 2010, 05:49:10 AM
MW Hazard anyone?
Or I'll make T-Wrecks
Title: Re: Replica Wars 3 (DISCUSSION)
Post by: Jonzu95 on November 27, 2010, 05:59:26 AM
Hmm... Gravity? Steel Avenger? *thinks what to build*
Title: Re: Replica Wars 3 (DISCUSSION)
Post by: JoeBlo on November 27, 2010, 06:07:04 AM
I dont think I will enter due to me having the Replica Wars Curse :P
Title: Re: Replica Wars 3 (DISCUSSION)
Post by: NFX on November 27, 2010, 06:08:38 AM
But you bring a Coolness Factor of 99 to the table.  :cool:
Title: Re: Replica Wars 3 (DISCUSSION)
Post by: Badnik96 on November 27, 2010, 08:23:22 AM
Would I be able to enter Corkscrew Two?

Sure, ring spinners are allowed, they're technically realistic. * goes to add rule*
Title: Re: Replica Wars 3 (DISCUSSION)
Post by: NFX on November 27, 2010, 08:24:56 AM
Awesumzor. =D I've always wanted to build them, if only RA2 had ring spinner components.
Title: Re: Replica Wars 3 (DISCUSSION)
Post by: Badnik96 on November 27, 2010, 08:26:01 AM
rules updated :D
Title: Re: Replica Wars 3 (DISCUSSION)
Post by: GoldenFox93 on November 27, 2010, 01:20:26 PM
Would I be able to enter Corkscrew Two?
In which case, I'll have to think of a pretty good flipper to emulate. Might try Chaos 2, come to think of it.
Title: Re: Replica Wars 3 (DISCUSSION)
Post by: Scorpion on November 27, 2010, 01:25:32 PM
Would I be able to enter Corkscrew Two?
In which case, I'll have to think of a pretty good flipper to emulate. Might try Chaos 2, come to think of it.
Cassius 2...
Title: Re: Replica Wars 3 (DISCUSSION)
Post by: GoldenFox93 on November 27, 2010, 01:27:36 PM
Would I be able to enter Corkscrew Two?
In which case, I'll have to think of a pretty good flipper to emulate. Might try Chaos 2, come to think of it.
Cassius 2...
Already done in Series 1, mate. I got Third Place with it, actually   :beer:
Title: Re: Replica Wars 3 (DISCUSSION)
Post by: Scorpion on November 27, 2010, 01:30:03 PM
Would I be able to enter Corkscrew Two?
In which case, I'll have to think of a pretty good flipper to emulate. Might try Chaos 2, come to think of it.
Cassius 2...
Already done in Series 1, mate. I got Third Place with it, actually   :beer:
Cassius 3  :evilsmile:
I think I might start work on shredder soon actually, just incase it isn't as destructive as I know it'll be.
Title: Re: Replica Wars 3 (DISCUSSION)
Post by: That Robot is a Spy! on November 27, 2010, 01:33:52 PM
How about Matador?
Title: Re: Replica Wars 3 (DISCUSSION)
Post by: Badnik96 on November 27, 2010, 02:59:59 PM
Matador's fine.
Title: Re: Replica Wars 3 (DISCUSSION)
Post by: GoldenFox93 on November 27, 2010, 03:01:43 PM
Matador's fine.
Badnik, you know you saw my Chaos 2 replica in the Pay Tribute with Replica threads, right? I know that DSL reps aren't usually allowed, but can I enter Chaos 2, if it's not too much trouble? The only component it uses from the original DSL rep is the flipper.
Title: Re: Replica Wars 3 (DISCUSSION)
Post by: J24 on November 27, 2010, 03:02:16 PM
=C multibots still not allowed

oh well, guess i'll have to go for a conjoined typhoon twins rep
Title: Re: Replica Wars 3 (DISCUSSION)
Post by: GoldenFox93 on November 27, 2010, 03:02:57 PM
=C multibots still not allowed

oh well, guess i'll have to go for a conjoined typhoon twins rep
Siamese Reps  :heart_smiley:
Title: Re: Replica Wars 3 (DISCUSSION)
Post by: J24 on November 27, 2010, 03:04:09 PM
=C multibots still not allowed

oh well, guess i'll have to go for a conjoined typhoon twins rep
Siamese Reps  :heart_smiley:

That is extremely politically incorrect

but still  :heart_smiley:
Title: Re: Replica Wars 3 (DISCUSSION)
Post by: GoldenFox93 on November 27, 2010, 03:22:42 PM
Matador's fine.
Badnik, you know you saw my Chaos 2 replica in the Pay Tribute with Replica threads, right? I know that DSL reps aren't usually allowed, but can I enter Chaos 2, if it's not too much trouble? The only component it uses from the original DSL rep is the flipper.
Title: Re: Replica Wars 3 (DISCUSSION)
Post by: Conraaa on November 27, 2010, 03:31:19 PM
Good lord.
I was just struggling for an idea. Then this came on
Now I have an idea. A possibly awesome idea.
Thank you, Joe Esposito
Title: Re: Replica Wars 3 (DISCUSSION)
Post by: Enigm@ on November 27, 2010, 03:33:34 PM
And Joe Esposito thanks you too. =]
Title: Re: Replica Wars 3 (DISCUSSION)
Post by: Badnik96 on November 27, 2010, 03:36:48 PM
Matador's fine.
Badnik, you know you saw my Chaos 2 replica in the Pay Tribute with Replica threads, right? I know that DSL reps aren't usually allowed, but can I enter Chaos 2, if it's not too much trouble? The only component it uses from the original DSL rep is the flipper.

Sorry, I'm gonna be strict about it this time. No.
 
Also at this point I'm either gonna make Village Idiot or Kobotsu.
Title: Re: Replica Wars 3 (DISCUSSION)
Post by: GoldenFox93 on November 27, 2010, 03:38:59 PM
Matador's fine.
Badnik, you know you saw my Chaos 2 replica in the Pay Tribute with Replica threads, right? I know that DSL reps aren't usually allowed, but can I enter Chaos 2, if it's not too much trouble? The only component it uses from the original DSL rep is the flipper.

Sorry, I'm gonna be strict about it this time. No.
Strict about it? Did something happen in one of the previous series?
Title: Re: Replica Wars 3 (DISCUSSION)
Post by: Enigm@ on November 27, 2010, 03:40:07 PM
Matador's fine.
Badnik, you know you saw my Chaos 2 replica in the Pay Tribute with Replica threads, right? I know that DSL reps aren't usually allowed, but can I enter Chaos 2, if it's not too much trouble? The only component it uses from the original DSL rep is the flipper.

Sorry, I'm gonna be strict about it this time. No.
 
Also at this point I'm either gonna make Village Idiot or Kobotsu.
CURSES! I was gonna do Village Idiot too.
Title: Re: Replica Wars 3 (DISCUSSION)
Post by: Scorpion on November 27, 2010, 03:40:33 PM
Matador's fine.
Badnik, you know you saw my Chaos 2 replica in the Pay Tribute with Replica threads, right? I know that DSL reps aren't usually allowed, but can I enter Chaos 2, if it's not too much trouble? The only component it uses from the original DSL rep is the flipper.
Hey GF
(http://images1.wikia.nocookie.net/__cb20100528164934/robotwars/images/5/5d/Cassius_3.jpg)
Give in...
Title: Re: Replica Wars 3 (DISCUSSION)
Post by: GoldenFox93 on November 27, 2010, 03:41:00 PM
Matador's fine.
Badnik, you know you saw my Chaos 2 replica in the Pay Tribute with Replica threads, right? I know that DSL reps aren't usually allowed, but can I enter Chaos 2, if it's not too much trouble? The only component it uses from the original DSL rep is the flipper.
Hey GF
(http://images1.wikia.nocookie.net/__cb20100528164934/robotwars/images/5/5d/Cassius_3.jpg)
Give in...
Might be something to consider.
Title: Re: Replica Wars 3 (DISCUSSION)
Post by: Scorpion on November 27, 2010, 03:42:50 PM
Matador's fine.
Badnik, you know you saw my Chaos 2 replica in the Pay Tribute with Replica threads, right? I know that DSL reps aren't usually allowed, but can I enter Chaos 2, if it's not too much trouble? The only component it uses from the original DSL rep is the flipper.
Hey GF
(http://images1.wikia.nocookie.net/__cb20100528164934/robotwars/images/5/5d/Cassius_3.jpg)
Give in...
Might be something to consider.
Excellent, you're falling right into my plan...
Title: Re: Replica Wars 3 (DISCUSSION)
Post by: GoldenFox93 on November 27, 2010, 03:43:25 PM
Matador's fine.
Badnik, you know you saw my Chaos 2 replica in the Pay Tribute with Replica threads, right? I know that DSL reps aren't usually allowed, but can I enter Chaos 2, if it's not too much trouble? The only component it uses from the original DSL rep is the flipper.
Hey GF
(http://images1.wikia.nocookie.net/__cb20100528164934/robotwars/images/5/5d/Cassius_3.jpg)
Give in...
Might be something to consider.
Excellent, you're falling right into my plan...
Well on second thoughts, stop spamming me about it. You're beginning to annoy me.
Title: Re: Replica Wars 3 (DISCUSSION)
Post by: Enigm@ on November 27, 2010, 03:43:42 PM
DON'T DO IT GF!!!!
Title: Re: Replica Wars 3 (DISCUSSION)
Post by: Scorpion on November 27, 2010, 03:45:14 PM
Matador's fine.
Badnik, you know you saw my Chaos 2 replica in the Pay Tribute with Replica threads, right? I know that DSL reps aren't usually allowed, but can I enter Chaos 2, if it's not too much trouble? The only component it uses from the original DSL rep is the flipper.
Hey GF
(http://images1.wikia.nocookie.net/__cb20100528164934/robotwars/images/5/5d/Cassius_3.jpg)
Give in...
Might be something to consider.
Excellent, you're falling right into my plan...
Well on second thoughts, stop spamming me about it. You're beginning to annoy me.
Mwahah, oh fine.
I don't know why on earth I want you to make cassius 3 actually  :laughing
Title: Re: Replica Wars 3 (DISCUSSION)
Post by: Enigm@ on November 27, 2010, 03:47:17 PM
Yeah, why not Cassius 2?
Title: Re: Replica Wars 3 (DISCUSSION)
Post by: GoldenFox93 on November 27, 2010, 03:49:33 PM
Yeah, why not Cassius 2?
Already did so.
Title: Re: Replica Wars 3 (DISCUSSION)
Post by: Enigm@ on November 27, 2010, 03:54:15 PM
Oh yeah, I forgot. :P
Title: Re: Replica Wars 3 (DISCUSSION)
Post by: J24 on November 27, 2010, 03:58:40 PM
=C multibots still not allowed

oh well, guess i'll have to go for a conjoined typhoon twins rep

Hint Hint Badnik
Title: Re: Replica Wars 3 (DISCUSSION)
Post by: Badnik96 on November 27, 2010, 04:04:07 PM
bleh, no. I can't keep the format i'm running with multibots.

...However, You can make the conjoined twins version, or use smartzones to make it look like a multibot.
Title: Re: Replica Wars 3 (DISCUSSION)
Post by: Badnik96 on November 27, 2010, 04:05:02 PM
Matador's fine.
Badnik, you know you saw my Chaos 2 replica in the Pay Tribute with Replica threads, right? I know that DSL reps aren't usually allowed, but can I enter Chaos 2, if it's not too much trouble? The only component it uses from the original DSL rep is the flipper.

Sorry, I'm gonna be strict about it this time. No.
 
Also at this point I'm either gonna make Village Idiot or Kobotsu.
CURSES! I was gonna do Village Idiot too.
Nah, you can do VI, I'm doing Kobotsu.
Title: Re: Replica Wars 3 (DISCUSSION)
Post by: GoldenFox93 on November 27, 2010, 04:06:35 PM
Now what will I do with a second-rate Chaos 2 rep lying around my garage that I cannot enter?
Title: Re: Replica Wars 3 (DISCUSSION)
Post by: Enigm@ on November 27, 2010, 04:08:24 PM
Matador's fine.
Badnik, you know you saw my Chaos 2 replica in the Pay Tribute with Replica threads, right? I know that DSL reps aren't usually allowed, but can I enter Chaos 2, if it's not too much trouble? The only component it uses from the original DSL rep is the flipper.

Sorry, I'm gonna be strict about it this time. No.
 
Also at this point I'm either gonna make Village Idiot or Kobotsu.
CURSES! I was gonna do Village Idiot too.
Nah, you can do VI, I'm doing Kobotsu.
  :gawe:
Title: Re: Replica Wars 3 (DISCUSSION)
Post by: NFX on November 27, 2010, 04:19:19 PM
Now what will I do with a second-rate Chaos 2 rep lying around my garage that I cannot enter?
FLIP STUFF FOR THE LOLS.
Title: Re: Replica Wars 3 (DISCUSSION)
Post by: GoldenFox93 on November 27, 2010, 04:20:54 PM
Now what will I do with a second-rate Chaos 2 rep lying around my garage that I cannot enter?
FLIP STUFF FOR THE LOLS.
You know what? Maybe I'll consider that. I'll finish it anyway, and then maybe I'll show it to Badnik on the inside, to prove that apart from the weapon system, it's fully legal.
Title: Re: Replica Wars 3 (DISCUSSION)
Post by: Enigm@ on November 27, 2010, 04:21:22 PM
1. Flip Stuff
2. ????
3. PROFIT!!!!
Title: Re: Replica Wars 3 (DISCUSSION)
Post by: NFX on November 27, 2010, 04:22:10 PM
Now what will I do with a second-rate Chaos 2 rep lying around my garage that I cannot enter?
FLIP STUFF FOR THE LOLS.
You know what? Maybe I'll consider that. I'll finish it anyway, and then maybe I'll show it to Badnik on the inside, to prove that apart from the weapon system, it's fully legal.
Have some fun chucking the car in the air. =D I do with my LW Flipper, Fatal Exception.
Title: Re: Replica Wars 3 (DISCUSSION)
Post by: GoldenFox93 on November 27, 2010, 04:32:50 PM
Sounds like fun. So I know that you're entering Corkscrew, J20's doing the Siamese Typhoon Twins, Enigma's doing Village Idiot and Badnik's doing Kobotsu, but I'm quite curious to know what everyone else is making.
Title: Re: Replica Wars 3 (DISCUSSION)
Post by: Conraaa on November 27, 2010, 04:58:23 PM
I'm making Space Operations Force.
Title: Re: Replica Wars 3 (DISCUSSION)
Post by: GoldenFox93 on November 27, 2010, 04:59:00 PM
Interesting name. Picture?
Title: Re: Replica Wars 3 (DISCUSSION)
Post by: Conraaa on November 27, 2010, 05:02:47 PM
About 18 seconds in
or Spin Orbiting Force.
Edit: Looking this thing up it's had quite a few different names. Makes it fun to find :D
And finally, an actual picture like you asked for.
(http://robotcombat.com/images/bbsf00/spinorbitingforce.jpg)
Title: Re: Replica Wars 3 (DISCUSSION)
Post by: GoldenFox93 on November 27, 2010, 05:06:53 PM
Reminds me of SOB somewhat.
Title: Re: Replica Wars 3 (DISCUSSION)
Post by: Enigm@ on November 27, 2010, 05:07:19 PM
Reminds me of That Darn Dustpan!
Title: Re: Replica Wars 3 (DISCUSSION)
Post by: Conraaa on November 27, 2010, 05:08:59 PM
Surprised you didn't say Tentomushi. According to ever reliable youtube comments it uses the same chassis :P
Title: Re: Replica Wars 3 (DISCUSSION)
Post by: GoldenFox93 on November 27, 2010, 05:11:51 PM
Now that you mention it, yes it does look like it.

Have you seen my Chaos 2 rep yet?
Title: Re: Replica Wars 3 (DISCUSSION)
Post by: Conraaa on November 27, 2010, 05:13:24 PM
I have, and it's pretty.
Title: Re: Replica Wars 3 (DISCUSSION)
Post by: Enigm@ on November 27, 2010, 05:13:46 PM
Pretty amazing.
Title: Re: Replica Wars 3 (DISCUSSION)
Post by: GoldenFox93 on November 27, 2010, 05:14:38 PM
Thanks guys. It seems a pity to not use it, really. But I'm continuing working on it all the same.
Title: Re: Replica Wars 3 (DISCUSSION)
Post by: Scorpion on November 27, 2010, 05:26:56 PM
It was a nice rep GF.
Here's a pic of the bot I want to enter a rep of
Title: Re: Replica Wars 3 (DISCUSSION)
Post by: Ben Purse on November 27, 2010, 05:28:53 PM
Is it ok to use custom parts if the robot is extremely powerful. Here is a video Of the robot i should be replicating. Its name is Deverstator
http://www.youtube.com/watch?v=ctibrwicijE&feature=related# (http://www.youtube.com/watch?v=ctibrwicijE&feature=related#)
Title: Re: Replica Wars 3 (DISCUSSION)
Post by: Badnik96 on November 27, 2010, 05:31:37 PM
No, you can use only the parts that come in DSL 2.1.
Title: Re: Replica Wars 3 (DISCUSSION)
Post by: J24 on November 27, 2010, 05:33:49 PM
So no smartzownz for howding my weplicas evil twin in pwace?
=C
Title: Re: Replica Wars 3 (DISCUSSION)
Post by: NFX on November 27, 2010, 05:35:52 PM
I dunno. You could build the angled thing that held them together. Or something that isn't a multibot.
Title: Re: Replica Wars 3 (DISCUSSION)
Post by: GoldenFox93 on November 27, 2010, 05:36:46 PM
Typhoon Lightning, maybe.
Title: Re: Replica Wars 3 (DISCUSSION)
Post by: NFX on November 27, 2010, 05:55:48 PM
I believe that was part of the multibot. One was called Lightning, the other was called Thunder. Thunder fought on its own in the LW "Championship" against Ellie's Little Pink Bot.
Title: Re: Replica Wars 3 (DISCUSSION)
Post by: Naryar on November 27, 2010, 06:11:52 PM
I will probably not enter anything. Replicas are annoying.
Title: Re: Replica Wars 3 (DISCUSSION)
Post by: GoldenFox93 on November 27, 2010, 06:20:09 PM
I believe that was part of the multibot. One was called Lightning, the other was called Thunder. Thunder fought on its own in the LW "Championship" against Ellie's Little Pink Bot.
Exactly. I was thinking maybe he could build one of the twins, but I decided not to mention Thunder because the skirt would be tricky to replicate.
Title: Re: Replica Wars 3 (DISCUSSION)
Post by: S.T.C. on November 27, 2010, 06:21:30 PM
No, you can use only the parts that come in DSL 2.1.
Are the judge burst motors okay?
Title: Re: Replica Wars 3 (DISCUSSION)
Post by: GoldenFox93 on November 27, 2010, 06:22:45 PM
Yes, I've used them on both my entries.
Title: Re: Replica Wars 3 (DISCUSSION)
Post by: Badnik96 on November 27, 2010, 06:32:22 PM
Yes.
Title: Re: Replica Wars 3 (DISCUSSION)
Post by: S.T.C. on November 27, 2010, 08:21:47 PM
Then flippers might be fun to work with for this.
Title: Re: Replica Wars 3 (DISCUSSION)
Post by: SKBT on November 27, 2010, 09:04:36 PM
I call dibs on Sub Zero.
Title: Re: Replica Wars 3 (DISCUSSION)
Post by: G.K. on November 28, 2010, 04:32:35 AM
Now what will I do with a second-rate Chaos 2 rep lying around my garage that I cannot enter?
FLIP STUFF FOR THE LOLS.
You know what? Maybe I'll consider that. I'll finish it anyway, and then maybe I'll show it to Badnik on the inside, to prove that apart from the weapon system, it's fully legal.

Well:


-Your bot cannot be a replica of a bot that is already in DSL 2.1.

That is a rule. Accept it and move on.
Title: Re: Replica Wars 3 (DISCUSSION)
Post by: JoeBlo on November 28, 2010, 04:38:48 AM
That is a rule. Accept it and move on.

^ QFT ^

<insert additional supporting text so this post isnt so boring and empty>
Title: Re: Replica Wars 3 (DISCUSSION)
Post by: Naryar on November 28, 2010, 04:49:50 AM
I don't see why this rule exists anyway.

What if someone actually makes a BETTER replica than the DSL 2.1 ones ?

Title: Re: Replica Wars 3 (DISCUSSION)
Post by: That Robot is a Spy! on November 28, 2010, 04:52:01 AM
Then I think it should be added in a later patch.
Title: Re: Replica Wars 3 (DISCUSSION)
Post by: cephalopod on November 28, 2010, 05:55:01 AM
If it's okay with Badnik, I wish to enter the S7 version of MightyMouse (with the rear disks rather than the flail).
I dunno if I can do this having entered a version of it last time but yuhknow, I wanna try :L
Title: Re: Replica Wars 3 (DISCUSSION)
Post by: NFX on November 28, 2010, 07:25:16 AM
I don't see why that wouldn't be illegal. There's nothing that says you can't enter the same robot twice.
Title: Re: Replica Wars 3 (DISCUSSION)
Post by: GoldenFox93 on November 28, 2010, 08:47:32 AM
I don't see why this rule exists anyway.

What if someone actually makes a BETTER replica than the DSL 2.1 ones ?
Quoted for Truth.
Title: Re: Replica Wars 3 (DISCUSSION)
Post by: Zog on November 28, 2010, 08:51:50 AM
I've found a loophole. We can build reps even if they're in DSL 2.0, instead of 2.1. Suck on that :P
Title: Re: Replica Wars 3 (DISCUSSION)
Post by: Naryar on November 28, 2010, 09:34:40 AM
I've found a loophole. We can build reps even if they're in DSL 2.0, instead of 2.1. Suck on that :P

Hey ! That's my job !

But nice one :P
Title: Re: Replica Wars 3 (DISCUSSION)
Post by: Badnik96 on November 28, 2010, 09:39:22 AM
I've found a loophole. We can build reps even if they're in DSL 2.0, instead of 2.1. Suck on that :P
*edits rules*
If it's okay with Badnik, I wish to enter the S7 version of MightyMouse (with the rear disks rather than the flail).
I dunno if I can do this having entered a version of it last time but yuhknow, I wanna try :L
Sure, go ahead.
So no smartzownz for howding my weplicas evil twin in pwace?
=C

Mad's smartzones come in DSL 2.1 :P
Title: Re: Replica Wars 3 (DISCUSSION)
Post by: J24 on November 28, 2010, 09:40:19 AM
So no smartzownz for howding my weplicas evil twin in pwace?
=C

Mad's smartzones come in DSL 2.1 :P

I didnt think you could attach stuff to them
Title: Re: Replica Wars 3 (DISCUSSION)
Post by: Badnik96 on November 28, 2010, 09:41:32 AM
So no smartzownz for howding my weplicas evil twin in pwace?
=C

Mad's smartzones come in DSL 2.1 :P

I didnt think you could attach stuff to them

well you can.
Title: Re: Replica Wars 3 (DISCUSSION)
Post by: GoldenFox93 on November 28, 2010, 09:41:53 AM
Well if I can't enter Chaos 2, I might give Bigger Brother a try.
Title: Re: Replica Wars 3 (DISCUSSION)
Post by: powerrave on November 28, 2010, 09:42:05 AM
i'll enter... if i can think of something to make.
Title: Re: Replica Wars 3 (DISCUSSION)
Post by: JoeBlo on November 28, 2010, 09:42:31 AM
Mad's SZ's currently are the ONLY ones that provide component attaching to them..
Title: Re: Replica Wars 3 (DISCUSSION)
Post by: powerrave on November 28, 2010, 09:43:40 AM
call me nuts but an idea just pooped into my head. King B Powerworks!
Title: Re: Replica Wars 3 (DISCUSSION)
Post by: Badnik96 on November 28, 2010, 09:45:22 AM
cmon guys, There are 48 spots available in this one, I need more votes!
 
edit: Also, Joe, I can start this one any time I want? Because I've run 3 tourneys already :P
Title: Re: Replica Wars 3 (DISCUSSION)
Post by: GoldenFox93 on November 28, 2010, 09:46:09 AM
call me nuts but an idea just pooped into my head. King B Powerworks!
Sounds good, but beware if Jonzu is entering Steel Avenger- he might get your wheel off with a well-timed charge   :gawe:
Title: Re: Replica Wars 3 (DISCUSSION)
Post by: powerrave on November 28, 2010, 09:48:35 AM
oh i will be aware of that.

seeing how i do in tournaments overall, i will lose no matter what! and don't you forget it!
Title: Re: Replica Wars 3 (DISCUSSION)
Post by: GoldenFox93 on November 28, 2010, 09:50:48 AM
oh i will be aware of that.

seeing how i do in tournaments overall, i will lose no matter what! and don't you forget it!
But good luck nonetheless- I'll be entering a flipper. One of the prototypes I've been working on is Bigger Brother, but I might look into other options, too.
Title: Re: Replica Wars 3 (DISCUSSION)
Post by: powerrave on November 28, 2010, 10:00:07 AM
thanks for that. will see what you enter in the end. same counts for me..

i still can't believe how i lost in RW2. :/
Title: Re: Replica Wars 3 (DISCUSSION)
Post by: GoldenFox93 on November 28, 2010, 10:01:08 AM
i still can't believe how i lost in RW2. :/
Same here. But once I'm in, the Primate is the first one I'm going for   :evilsmile:
Title: Re: Replica Wars 3 (DISCUSSION)
Post by: powerrave on November 28, 2010, 10:03:03 AM
i'm going for climbing over the wall =D
Title: Re: Replica Wars 3 (DISCUSSION)
Post by: JoeBlo on November 28, 2010, 10:03:37 AM
edit: Also, Joe, I can start this one any time I want? Because I've run 3 tourneys already :P

I posted many times about the place that those rules are not complete yet..

encase you missed it... they arnt :P

please wait this time unlike last time...
Title: Re: Replica Wars 3 (DISCUSSION)
Post by: Pwnator on November 28, 2010, 10:33:17 AM
Crap. Still can't form a steep semi-circled wedge. That means no Dark Bullit from me. >.<

Hopefully, I can find another drum/VS to replicate before homework floods in again.
Title: Re: Replica Wars 3 (DISCUSSION)
Post by: GoldenFox93 on November 28, 2010, 11:36:02 AM
call me nuts but an idea just pooped into my head. King B Powerworks!
:laughing
Title: Re: Replica Wars 3 (DISCUSSION)
Post by: powerrave on November 28, 2010, 11:37:44 AM
i should really pay more attention to what i type.
Title: Re: Replica Wars 3 (DISCUSSION)
Post by: Conraaa on November 29, 2010, 09:28:34 AM
You know how I said I was making SOF?
I changed my mind, now i'm trying to make General Chompsalot
Title: Re: Replica Wars 3 (DISCUSSION)
Post by: Badnik96 on November 29, 2010, 03:02:16 PM
my Kobotsu didn't work, dunno what to make now
Title: Re: Replica Wars 3 (DISCUSSION)
Post by: That Robot is a Spy! on November 29, 2010, 03:46:06 PM
Make this heavyweight, and then, Facet will beat you.
Title: Re: Replica Wars 3 (DISCUSSION)
Post by: GoldenFox93 on November 29, 2010, 03:46:37 PM
Make this heavyweight, and then, Facet will beat you.
Very well then, I'll send my Chaos 2 rep to battle it   :gunz:
Title: Re: Replica Wars 3 (DISCUSSION)
Post by: That Robot is a Spy! on November 29, 2010, 03:47:32 PM
Just let me get STARTED on it first  :smile:
Title: Re: Replica Wars 3 (DISCUSSION)
Post by: GoldenFox93 on November 29, 2010, 03:49:43 PM
That's an idea...maybe I'll put my completed Chaos 2 rep up for download at some point.
Title: Re: Replica Wars 3 (DISCUSSION)
Post by: NFX on November 29, 2010, 03:51:33 PM
Excellent. Now head to the PTWR Thread and stare your defeat in the face. >=D
Title: Re: Replica Wars 3 (DISCUSSION)
Post by: That Robot is a Spy! on November 29, 2010, 03:53:11 PM
Pay Tribute with Replicas.
EDITED: Ninjad.
Title: Re: Replica Wars 3 (DISCUSSION)
Post by: GoldenFox93 on November 29, 2010, 03:53:47 PM
Well I've seen it, and I must say it's a very good looking rep! From what I can see, I'll need something well-armoured and with a powerful flipper.
 
EDIT: Only just realised what it meant after I posted. Derp   :rolleyes:
Title: Re: Replica Wars 3 (DISCUSSION)
Post by: NFX on November 29, 2010, 03:58:48 PM
Meh, 'Tis fine. =P I posted, realised you deleted, deleted my post, then realised that TRiaS had replied. XD

And I can only assume you will abuse the Judge Burst for a third time. =P
Title: Re: Replica Wars 3 (DISCUSSION)
Post by: GoldenFox93 on November 29, 2010, 04:00:39 PM
You bet! To be one of the primary ones who can flip opponents out of the fence, build good-looking and effective flipper robots, and to piss off Naryar  :P
Title: Re: Replica Wars 3 (DISCUSSION)
Post by: NFX on November 29, 2010, 04:04:47 PM
If you want to enrage the mighty Naryar, all you have to do is say razors suck. =P Or use ballasts.
Title: Re: Replica Wars 3 (DISCUSSION)
Post by: GoldenFox93 on November 29, 2010, 04:06:05 PM
Maybe I'll try a combination of all three.

And using Piglets for drive and Aluminium armour  >:P
Title: Re: Replica Wars 3 (DISCUSSION)
Post by: Badnik96 on November 29, 2010, 04:08:19 PM
@ TRiaS There is absolutely no way I will change this to HW. Sorry.
Title: Re: Replica Wars 3 (DISCUSSION)
Post by: NFX on November 29, 2010, 04:10:24 PM
Or Tazbot Wheels. =P It's not entirely very difficult to make him angry, but most of the time he just writes FAIL or, more recently, bah. He'd be a good candidate for scrooge in the GTM Panto. Sitting in his tower counting his razor tips, forcing Pwnator to moderate the Showcase section alone on Christmas Day.

On a less off-topic note, you are still going to lose. >=D
Title: Re: Replica Wars 3 (DISCUSSION)
Post by: G.K. on November 29, 2010, 04:18:57 PM
He'd be a good candidate for scrooge in the GTM Panto

We need a thread for that nao!
Title: Re: Replica Wars 3 (DISCUSSION)
Post by: Scorpion on November 29, 2010, 04:21:57 PM
I was just thinking the same thing

Anyway, BOT, I've decided to make something weird, or flippery  :mrgreen:
Cassius 3 failed (why did you put a chewblade on the back of your rep GF?) so I think i'll try mute...
Title: Re: Replica Wars 3 (DISCUSSION)
Post by: GoldenFox93 on November 29, 2010, 04:30:13 PM
Or Tazbot Wheels. =P It's not entirely very difficult to make him angry, but most of the time he just writes FAIL or, more recently, bah. He'd be a good candidate for scrooge in the GTM Panto. Sitting in his tower counting his razor tips, forcing Pwnator to moderate the Showcase section alone on Christmas Day.
Oh really? In the GTM Christmas Panto (A GTM Christmas Carol), I envisioned some of the casting below-
 
ACAMS: Ebenezer Scrooge
Goose: Bob Cratchit
Several antweights and lightweights: Bookkeepers
Joeblo: Fred
GF93 and Natef: Charity Workers
Starcore: Jacob Marley
Madiaba: Ghost of Christmas Past
NFX: Fezziwig
Jonzu (In drag): Belle
Serge: Ghost of Christmas Present
Barbie: Mrs Cratchit
Temi: Tiny Tim
LRA2: Ignorance
Sparkey: Want
Naryar: Ghost of Christmas Yet to Come
Title: Re: Replica Wars 3 (DISCUSSION)
Post by: Badnik96 on November 29, 2010, 04:44:45 PM
what about me?
Title: Re: Replica Wars 3 (DISCUSSION)
Post by: NFX on November 29, 2010, 04:50:30 PM
what about me?
Lighting Guy. =P
Title: Re: Replica Wars 3 (DISCUSSION)
Post by: Badnik96 on November 29, 2010, 05:07:50 PM
So, there seems to be a lot of discussion about this, but I see nowhere near enough votes to constitute for 48 entries, co I'm cutting it down to 32.
Title: Re: Replica Wars 3 (DISCUSSION)
Post by: Jonzu95 on November 30, 2010, 01:19:54 AM
Belle...?
Title: Re: Replica Wars 3 (DISCUSSION)
Post by: NFX on November 30, 2010, 06:34:26 AM
Belle...?
Well, SotG couldn't stick to the lines, and you're the next closest thing to a girl we could find. =P
Title: Re: Replica Wars 3 (DISCUSSION)
Post by: Jonzu95 on November 30, 2010, 06:52:27 AM
Eh?
Title: Re: Replica Wars 3 (DISCUSSION)
Post by: GoldenFox93 on November 30, 2010, 06:55:20 AM
Belle is a younger Scrooge's love interest, who eventually leaves him after he neglects her in favour of business.

(Just in case you're wondering why I'm here so early, it's because Sixth Form finished early because of the snow)
Title: Re: Replica Wars 3 (DISCUSSION)
Post by: Pwnator on November 30, 2010, 06:57:25 AM
Belle is a younger Scrooge's love interest, who eventually leaves him after he neglects her in favour of business.

(Just in case you're wondering why I'm here so early, it's because Sixth Form finished early because of the snow)

YOU STILL HAVEN'T POSTED YOUR BOT FOR THE CHALLENGE!
Title: Re: Replica Wars 3 (DISCUSSION)
Post by: NFX on November 30, 2010, 07:06:25 AM
Belle is a younger Scrooge's love interest, who eventually leaves him after he neglects her in favour of business.

(Just in case you're wondering why I'm here so early, it's because Sixth Form finished early because of the snow)

YOU STILL HAVEN'T POSTED YOUR BOT FOR THE CHALLENGE!

OR YOUR HOME NATIONS BOT!
Title: Re: Replica Wars 3 (DISCUSSION)
Post by: Jonzu95 on November 30, 2010, 07:07:06 AM
What to build... >_<
Title: Re: Replica Wars 3 (DISCUSSION)
Post by: Naryar on November 30, 2010, 07:43:12 AM
you're the next closest thing to a girl we could find. =P

:trollface
Title: Re: Replica Wars 3 (DISCUSSION)
Post by: Scorpion on November 30, 2010, 11:49:05 AM
you're the next closest thing to a girl we could find. =P
I'm a girl.
Can i have all your money?
Care to reconsider that?
Title: Re: Replica Wars 3 (DISCUSSION)
Post by: G.K. on November 30, 2010, 12:00:09 PM
Do you want to play a girl in a panto?
Title: Re: Replica Wars 3 (DISCUSSION)
Post by: Scorpion on November 30, 2010, 12:01:42 PM
Would I get to wear a checked gingham dress and army boots?
Title: Re: Replica Wars 3 (DISCUSSION)
Post by: G.K. on November 30, 2010, 12:03:04 PM
no
Title: Re: Replica Wars 3 (DISCUSSION)
Post by: Jonzu95 on November 30, 2010, 12:05:14 PM
I see what you did SM...
Title: Re: Replica Wars 3 (DISCUSSION)
Post by: Squirrel_Monkey on November 30, 2010, 12:21:34 PM
 :wt:
Title: Re: Replica Wars 3 (DISCUSSION)
Post by: Zog on November 30, 2010, 12:30:56 PM
you're the next closest thing to a girl we could find. =P


And that't coming from the person who wears kilts? :P
Title: Re: Replica Wars 3 (DISCUSSION)
Post by: Conraaa on November 30, 2010, 12:31:21 PM
Would I get to wear a checked gingham dress and army boots?
Ask Mr Flibble
Title: Re: Replica Wars 3 (DISCUSSION)
Post by: Scorpion on November 30, 2010, 12:41:42 PM
Would I get to wear a checked gingham dress and army boots?
Ask Mr Flibble
And you get the bonus point for noticing the reference to the best episode of red dwarf ever.
Title: Re: Replica Wars 3 (DISCUSSION)
Post by: That Robot is a Spy! on December 03, 2010, 04:33:45 PM
Facet is ready!
Title: Re: Replica Wars 3 (DISCUSSION)
Post by: NFX on December 03, 2010, 04:42:56 PM
you're the next closest thing to a girl we could find. =P


And that's coming from the person who wears kilts? :P
Yes it is. I only look like a girl from a distance. =D
 
There already seems to be a heck of a lot of interest in this. Which is good. =D I'm reasonably confident, though the amount of flippers being entered does worry me slightly.
Title: Re: Replica Wars 3 (DISCUSSION)
Post by: GoldenFox93 on December 03, 2010, 04:43:56 PM
you're the next closest thing to a girl we could find. =P


And that's coming from the person who wears kilts? :P
Yes it is. I only look like a girl from a distance. =D
 
There already seems to be a heck of a lot of interest in this. Which is good. =D I'm reasonably confident, though the amount of flippers being entered does worry me slightly.
And hopefully, once my entry is finished, it'll be me who will have you most worried   :evilsmile:
Title: Re: Replica Wars 3 (DISCUSSION)
Post by: That Robot is a Spy! on December 03, 2010, 04:44:09 PM
May I use skirt hinges?
Title: Re: Replica Wars 3 (DISCUSSION)
Post by: Scorpion on December 03, 2010, 05:42:20 PM
you're the next closest thing to a girl we could find. =P


And that's coming from the person who wears kilts? :P
Yes it is. I only look like a girl from a distance. =D
 
There already seems to be a heck of a lot of interest in this. Which is good. =D I'm reasonably confident, though the amount of flippers being entered does worry me slightly.
Aww, but I want to enter mute!!
It goes pwing and then the other bot just goes thud against the wall and then mute gets flipped and it goes boop and it's like quadruple somersault and wahey it's landed upside down again!

So yeah, it's just like the real one  :laughing
Title: Re: Replica Wars 3 (DISCUSSION)
Post by: NFX on December 03, 2010, 05:47:11 PM
you're the next closest thing to a girl we could find. =P


And that's coming from the person who wears kilts? :P
Yes it is. I only look like a girl from a distance. =D
 
There already seems to be a heck of a lot of interest in this. Which is good. =D I'm reasonably confident, though the amount of flippers being entered does worry me slightly.
Aww, but I want to enter mute!!
It goes pwing and then the other bot just goes thud against the wall and then mute gets flipped and it goes boop and it's like quadruple somersault and wahey it's landed upside down again!

So yeah, it's just like the real one  :laughing

THAT IS AWESOME. Seriously, you have got to enter Mute, I would love it if you did. =D
Title: Re: Replica Wars 3 (DISCUSSION)
Post by: That Robot is a Spy! on December 03, 2010, 05:48:07 PM
My Facet looks like sh**.
Title: Re: Replica Wars 3 (DISCUSSION)
Post by: Scorpion on December 03, 2010, 05:50:21 PM
you're the next closest thing to a girl we could find. =P


And that's coming from the person who wears kilts? :P
Yes it is. I only look like a girl from a distance. =D
 
There already seems to be a heck of a lot of interest in this. Which is good. =D I'm reasonably confident, though the amount of flippers being entered does worry me slightly.
Aww, but I want to enter mute!!
It goes pwing and then the other bot just goes thud against the wall and then mute gets flipped and it goes boop and it's like quadruple somersault and wahey it's landed upside down again!

So yeah, it's just like the real one  :laughing

THAT IS AWESOME. Seriously, you have got to enter Mute, I would love it if you did. =D
In order for a mute rep to be given justice, the commentator has to be laughing continually  :laughing

I may do, it'll suck because of the design atleast, but it'll be fun  :mrgreen:
Title: Re: Replica Wars 3 (DISCUSSION)
Post by: NFX on December 03, 2010, 05:50:56 PM
And that's the main thing. Have fun, enjoy the game, and bring joy to others through the game. =D
Title: Re: Replica Wars 3 (DISCUSSION)
Post by: That Robot is a Spy! on December 03, 2010, 05:51:48 PM
If you want, add a sound mod when the flipper fires. Like this:
http://www.youtube.com/watch?v=7QLSRMoKKS0# (http://www.youtube.com/watch?v=7QLSRMoKKS0#)
Title: Re: Replica Wars 3 (DISCUSSION)
Post by: Scorpion on December 03, 2010, 05:53:43 PM
And that's the main thing. Have fun, enjoy the game, and bring joy to others through the game. =D
Hell yeah *hi 5's*
I've always loved mute, it's insane, and the bot's designs done and it works fairly close to the original  :approve:

BTW, you lost  :p
Title: Re: Replica Wars 3 (DISCUSSION)
Post by: That Robot is a Spy! on December 03, 2010, 05:55:00 PM
I might work on Facet more tommorow. I might make Judge Shred 3 or maybe even Tsunami.
Title: Re: Replica Wars 3 (DISCUSSION)
Post by: Scorpion on December 03, 2010, 05:57:28 PM
Corkscrew II, judge sgred 3 AND mute would be interesting  :laughing
Title: Re: Replica Wars 3 (DISCUSSION)
Post by: NFX on December 03, 2010, 05:58:23 PM
VERY interesting.
 
And that's the main thing. Have fun, enjoy the game, and bring joy to others through the game. =D
Hell yeah *hi 5's*
I've always loved mute, it's insane, and the bot's designs done and it works fairly close to the original  :approve:

BTW, you lost  :p

I have lost many times. Mostly because my wedges suck. =D
Title: Re: Replica Wars 3 (DISCUSSION)
Post by: GroudonRobotWars on December 03, 2010, 05:58:35 PM
Got to fiqure out what to build.
Title: Re: Replica Wars 3 (DISCUSSION)
Post by: Scorpion on December 03, 2010, 06:07:42 PM
Now, does the rear s****y little lifter thing on the back of mute have to be working? or can I just leave it as 2 forklift arms at the back to look like the lifter?

Also, can you guys think of a better way to have the flipper lower down?
It's o.k ATM, i'm using a heavily weighed down shell piece for the flipper that's gonna be on the inside, but i'd like it to be a little bit lower down.
Title: Re: Replica Wars 3 (DISCUSSION)
Post by: NFX on December 03, 2010, 06:09:49 PM
It would work well if the skirt hinge burst motor was allowed.
Title: Re: Replica Wars 3 (DISCUSSION)
Post by: Scorpion on December 03, 2010, 06:16:35 PM
Aww, that sounds ideal  :(

Still, i'l have a look tommorow, the power seems right (i've got numerous tornado spikes and hexplates on the back of the shell piece to weigh it down :laughing) and I even laughed when it smaked panic attack into a wall  :mrgreen:

It's just lowering that weapon that's the pain, that way I won't have to worry about them being part way up the bot before the flipper can be used.
Title: Re: Replica Wars 3 (DISCUSSION)
Post by: Badnik96 on December 04, 2010, 07:39:50 AM
Now, does the rear s****y little lifter thing on the back of mute have to be working? or can I just leave it as 2 forklift arms at the back to look like the lifter?

no, that's fine.
Title: Re: Replica Wars 3 (DISCUSSION)
Post by: Scorpion on December 04, 2010, 07:41:29 AM
Now, does the rear s****y little lifter thing on the back of mute have to be working? or can I just leave it as 2 forklift arms at the back to look like the lifter?

no, that's fine.
Good.
I never got why they put that thing on mute anyway, it was useless.
Title: Re: Replica Wars 3 (DISCUSSION)
Post by: madman3 on December 04, 2010, 08:37:47 AM
T Wrecks has been built...
Title: Re: Replica Wars 3 (DISCUSSION)
Post by: Zog on December 04, 2010, 01:43:42 PM
Pay Tribute With The Replicas. Now.
Title: Re: Replica Wars 3 (DISCUSSION)
Post by: Badnik96 on December 04, 2010, 02:14:25 PM
Angry Asp shall be my entry.
Title: Re: Replica Wars 3 (DISCUSSION)
Post by: Enigm@ on December 04, 2010, 05:52:05 PM
Village Idiot is crashing so I'm going to pick Little Drummer Boy instead.
Title: Re: Replica Wars 3 (DISCUSSION)
Post by: Mouldy on December 05, 2010, 02:44:58 AM
EHEHEHEHEH AHAHAHAHHA HAHAHAHA

I'll enter.... Major Tom!
Title: Re: Replica Wars 3 (DISCUSSION)
Post by: Zog on December 05, 2010, 05:52:32 AM
 :ban_smily:
Title: Re: Replica Wars 3 (DISCUSSION)
Post by: NFX on December 05, 2010, 06:02:29 AM
It's not really banworthy, he's just being a bit of a douche.
Title: Re: Replica Wars 3 (DISCUSSION)
Post by: Naryar on December 05, 2010, 06:06:20 AM
A bit ?
Title: Re: Replica Wars 3 (DISCUSSION)
Post by: S.T.C. on December 05, 2010, 09:10:24 PM
...
...
...
Spawn Again!
...nah...
I still plan on entering though.
Title: Re: Replica Wars 3 (DISCUSSION)
Post by: Badnik96 on December 09, 2010, 12:44:07 PM
Do you guys want this to start? As in, now?
Title: Re: Replica Wars 3 (DISCUSSION)
Post by: NFX on December 09, 2010, 12:45:07 PM
It'd be kinda quick, but I've got my rep all ready to go.
Title: Re: Replica Wars 3 (DISCUSSION)
Post by: Naryar on December 09, 2010, 12:56:50 PM
I might enter just for the fun of abusing the many loopholes contained into these rules  :evilsmile:
Title: Re: Replica Wars 3 (DISCUSSION)
Post by: GoldenFox93 on December 09, 2010, 12:57:10 PM
Same here. I'll be counting down the days until I can get revenge on S_M for last time   :P
Title: Re: Replica Wars 3 (DISCUSSION)
Post by: Squirrel_Monkey on December 09, 2010, 12:57:29 PM
:P
Title: Re: Replica Wars 3 (DISCUSSION)
Post by: NFX on December 09, 2010, 12:58:29 PM
Same here. I'll be counting down the days until I can get revenge on S_M for last time   :P
Don't forget me, Foxy. >=D
Title: Re: Replica Wars 3 (DISCUSSION)
Post by: Scorpion on December 09, 2010, 12:59:09 PM
Well, mute just needs a skin and then i'm done really  :mrgreen:

I hope you're all prepared to get flipped around the arena a bit (not oota though).
Title: Re: Replica Wars 3 (DISCUSSION)
Post by: GoldenFox93 on December 09, 2010, 12:59:31 PM
:P
Yep, you keep on smiling. You won't be doing so once you're lying in a heap outside the arena   :approve:
 
And you too, Scotty. In fact, I'll give you both free flying lessons   :evilsmile:
Title: Re: Replica Wars 3 (DISCUSSION)
Post by: Naryar on December 09, 2010, 01:00:22 PM
:P
Yep, you keep on smiling. You won't be doing so once you're lying in a heap outside the arena   :approve:
 
And you too, Scotty. In fact, I'll give you both free flying lessons   :evilsmile:

Senseless threats. We all know your judge burst bots fail anyway.
Title: Re: Replica Wars 3 (DISCUSSION)
Post by: Badnik96 on December 09, 2010, 01:03:39 PM
ok then.

TO SIGNUPS!
Title: Re: Replica Wars 3 (DISCUSSION)
Post by: GoldenFox93 on December 09, 2010, 01:08:34 PM
:P
Yep, you keep on smiling. You won't be doing so once you're lying in a heap outside the arena   :approve:
 
And you too, Scotty. In fact, I'll give you both free flying lessons   :evilsmile:

Senseless threats. We all know your judge burst bots fail anyway.
Alright then Nary, put your money where your mouth is and enter. I'll be waiting.
Title: Re: Replica Wars 3 (DISCUSSION)
Post by: Badnik96 on December 09, 2010, 01:10:33 PM
*posts signup thread, waiting for mod approval*
Title: Re: Replica Wars 3 (DISCUSSION)
Post by: Resetti's Replicas on December 09, 2010, 02:34:32 PM
Hven't started mine yet, I guess I'd better get moving.
Title: Re: Replica Wars 3 (DISCUSSION)
Post by: powerrave on December 09, 2010, 03:08:22 PM
same here.
Title: Re: Replica Wars 3 (DISCUSSION)
Post by: Conraaa on December 09, 2010, 04:36:53 PM
Made my entry.
It's hardly fantastic but still.
Title: Re: Replica Wars 3 (DISCUSSION)
Post by: JoeBlo on December 09, 2010, 10:16:00 PM
NOTE: This is NOT going to start for a while, I just want to confirm that this WILL happen, and also confirm a few rules.

13 days later...

ok then.

TO SIGNUPS!
Title: Re: Replica Wars 3 (DISCUSSION)
Post by: GroudonRobotWars on December 09, 2010, 10:17:49 PM
Quickly thinks of a bot to build.

Maybe 4 x 4, Splinter, Gravity or Tough As Nails


900 posts.
Title: Re: Replica Wars 3 (DISCUSSION)
Post by: powerrave on December 10, 2010, 10:38:19 AM
and i'm still thinking of making King B Powerworks. now to just get my *$$ in gear to actually start building it.
Title: Re: Replica Wars 3 (DISCUSSION)
Post by: Conraaa on December 10, 2010, 11:06:42 AM
Tough As Nails
I'd really like to see that
Title: Re: Replica Wars 3 (DISCUSSION)
Post by: NFX on December 10, 2010, 11:13:43 AM
NOTE: This is NOT going to start for a while, I just want to confirm that this WILL happen, and also confirm a few rules.

13 days later...

ok then.

TO SIGNUPS!

Back by popular demand...! =D
 
I'd also love to see a decent Tough as Nails rep.
Title: Re: Replica Wars 3 (DISCUSSION)
Post by: powerrave on December 10, 2010, 11:54:30 AM
me too since it's a Dutch robot, if i remember correctly.
Title: Re: Replica Wars 3 (DISCUSSION)
Post by: GoldenFox93 on December 10, 2010, 12:36:23 PM
And hopefully so I can break it  >:D
Title: Re: Replica Wars 3 (DISCUSSION)
Post by: Badnik96 on December 10, 2010, 02:26:44 PM
NOTE: This is NOT going to start for a while, I just want to confirm that this WILL happen, and also confirm a few rules.

13 days later...

ok then.

TO SIGNUPS!

NFX is right here. Back by popular demand :P
Title: Re: Replica Wars 3 (DISCUSSION)
Post by: JoeBlo on December 11, 2010, 12:18:31 AM
more like dangling a carrot in front of the donkey :P
Title: Re: Replica Wars 3 (DISCUSSION)
Post by: Hard Bot on December 15, 2010, 04:22:06 PM
I'll enter Night Stalker.
Title: Re: Replica Wars 3 (DISCUSSION)
Post by: JoeBlo on December 15, 2010, 07:07:41 PM
looks like you just cloned Thyrus's Night Stalker