gametechmods
Robot Arena Matches => Tournaments => Tournament Archives => Topic started by: Jonzu95 on February 18, 2013, 04:03:35 AM
-
Since we're Celebrating the 10-year anniversary of RA2, Let's do this!
(https://gametechmods.com/uploads/images/79065CombatAnts3.png)
RULES
- Stock AW Tourney
- Realistic rule does not apply
- Battles will be Rumbles
- No Hax Mode, BFE or AAM
- No Cheatbot2 or Custom Components
- Nasty pickle-stylish bots are banned.
- Matches are 2 minutes
- Arena will be Small Arena
- Brackets are will be pretty much similar like back in CA1 & CA2.
- Deadline: 1st of June
Entries
1. Jonzu95
2. Ianh05
3. S.H.I.E.L.D
4. Chaosmancer
5. Mechadino
6. RedlineM203
7. Venko
8. Conraaa
9. Badnik96
10.
11.
12.
13.
14.
15.
16.
-
Make sure to put hax mode isn't allowed down
-
dsl pls
-
dsl pls
^This would be nice.^
-
dsl pls
^This would be nice.^
CombatAnts 2 was DSL.
-
dsl pls
^This would be nice.^
CombatAnts 2 was DSL.
Which was a good thing. Stock AW's suck.
-
Well and we just had a stock AW touney with RoboZone 2.
-
Screw Hax mode. It's allowed because it's in-game glitch. And CA4 = DSL
-
But this is going to be boring...
-
But this is going to be boring...
DSL AWs are just as boring dude.
-
If you don't like the rules, don't enter. I'm getting sick of watching complaints.
-
suggestions -/- complaints
relax dog
-
Yay hax mode
Time to make some invincible thing
-
Count me in :gawe:
-
I need to show my entry too before I open signups...
-
I believe I'll defend my title x)
-
I believe I'll defend my title x)
This time I'll make sure not to get counted out with 1 second left. :dumb)
-
It'll be a little harder in stock I think :p
I believe I have my entry ready to go.
-
How can you tell the difference between BFE and Hax mode?
-
How can you tell the difference between BFE and Hax mode?
i dont think it matters
also i might make something
-
Screw Hax mode. It's allowed because it's in-game glitch.
well have fun getting a bunch of 1x1-chassis rammers, that of which can't be ko'd at all
-
Screw Hax mode. It's allowed because it's in-game glitch.
well have fun getting a bunch of 1x1-chassis rammers, that of which can't be ko'd at all
-
Screw Hax mode. It's allowed because it's in-game glitch.
well have fun getting a bunch of 1x1-chassis rammers, that of which can't be ko'd at all
I doubt that.
-
Screw Hax mode. It's allowed because it's in-game glitch.
well have fun getting a bunch of 1x1-chassis rammers, that of which can't be ko'd at all
I doubt that.
Used Mad's smartzones to mount the piston and CB. Found you cant raise casters higher than usual. <.<
(https://gametechmods.com/uploads/images/14241hack.png)
(https://gametechmods.com/uploads/images/81173Hack insi.png)
-
I probably won't enter if Hax mode is allowed because I will have no chance of winning.
-
Well I ain't gonna change the HAX mode off. It's in game building so it does count.
-
So it's learn Hax mode or go home?
-
I'm not even going to bother to build a bot is Hax mode is allowed.
So it's learn Hax mode or go home?
https://gametechmods.com/forums/index.php/topic,7468.0.html (https://gametechmods.com/forums/index.php/topic,7468.0.html)
-
OH FOR CRYING OUT LOUD.
NO HAX MODE BS THEN.
*ragequit*
-
I will enter (not with something from the AW-UFO series, don't worry), but You must AI my bot.
-
I will enter (not with something from the AW-UFO series, don't worry), but You must AI my bot.
That will be no problem.
-
I'LL ENTER :3
-
-Signups will be closed until I have received 24 or 32 entries.
Pardon my noobitude, but aren't entering and signing up the same thing?
-
-Signups will be closed until I have received 24 or 32 entries.
Pardon my noobitude, but aren't entering and signing up the same thing?
Yes.
You have to sent in your bot to "Sign up" for a tourney unless the tourney is something like Robo Rasslin'.
-
Time for the 5-year old Arsonist to return and wreak havoc
-
Eh, Stock AW's pretty fun. I'll probably enter this.
-
Anything I'm missing?
Yes, a rule against the new uberstack, which can give a significant advantage in that wight class...
-
Has Venko always been this much of a broken record?
-
He has a point, that's why I am not allowing it in ARBBC.
-
Anything I'm missing?
Yes, a rule against the new uberstack, which can give a significant advantage in that wight class...
What are you going to do with a Nifty in a HPZ in AW anyways?
It's not even that hard of a stack to pull off and really doesn't offer that much of an advantage. You guys are really just taking this stuff too far.
I mean I did the exact same thing with a blue snapper (axle load off the axle) to stack a BA in it and put a ramming rack on it on one of my LWs back in like August and nobody cared. Oh and if you are going to go on about how it is "unfair to stack 2 things with big collision meshes together", why don't you go after everybody who has 2 or 3 blacks together.
-
What are you going to do with a Nifty in a HPZ in AW anyways?
It's not even that hard of a stack to pull off and really doesn't offer that much of an advantage. You guys are really just taking this stuff too far.
Really?... :
(http://i.imgur.com/3ycLHJk.jpg)(https://gametechmods.com/uploads/images/65746screenshot_32.png)
...why don't you go after everybody who has 2 or 3 blacks together.
Stacking the same components is something else.
-
(http://i.imgur.com/3ycLHJk.jpg)(https://gametechmods.com/uploads/images/65746screenshot_32.png)
The first is a BW dude. Pretty sure someone can pull that off without that stack anyways since you can make the chassis smaller without the HPZ in it and then just use a BA stacking inside a nifty.
The second one is totally useless against anything in the AW class.
Stacking the same components is something else.
How is "something else"? You are still saving a crap ton of chassis space by putting 3 blacks together in the same spot. Oh, and by what I have done/tried, I think stacking components that are the same is harder (other than BAs, blue snappers, pinks, axles, air tanks, and contral boards) is harder than stacking 2 components that have different component meshes.
-
I will enter
-
Any chances of this starting soon?
-
I await, but I have so many choices :gawe: .
-
I should make my Entry...
...if I can be arsed. I've been very lazy lately.
-
Then stop playing bullsh**s and do it.
I'm really keen for this one...
-
(https://gametechmods.com/uploads/images/97580TeslaSpark.png)
Here's my entry. I also made logo.
(https://gametechmods.com/uploads/images/79065CombatAnts3.png)
-
Only 120.1? Does it not have DSA or something?
edit: Just read the post in your showcase. Can you do anything to make it fill up the last few KG?
-
Any obstacles not letting the signups opening soon?
-
lol someone should enter a Nasty Pickle bot.
-
Any obstacles not letting the signups opening soon?
All I need that moderator moves this to Signups.
-
Signups are now officially open.
And yes Ian, I have your bot. cba to check it out.
-
Let's kick this back on rails. Ian's entry is accepted.
-
I picked possibly my best AW this time :cool: Hopefully people who built AW's for Robo Zone 2 and ARBBC will also enter this.
-
*Enters a decent bot for once, no one else enters* :dumb)
-
must get ai for my huge aw sns to work
-
still AI'ing my aw SnSnS
-
I'd like to join. For funsies
-
(https://gametechmods.com/uploads/images/46450Robot Arena 2 2013-04-22 13-01-51-431.jpg)
Is this eligible to enter?
-
show us the insides please
-
of course. You just need to send the .bot file for me via Private message
-
Do I have to AI it first?
-
(https://gametechmods.com/uploads/images/17523Robot Arena 2 2013-04-22 16-57-18-213.jpg)
(https://gametechmods.com/uploads/images/70722Robot Arena 2 2013-04-22 16-57-40-939.jpg)
This is actually my first time building an Antweight, so it's not really that good compare to my other work.
-
Nope. I can AI for you
-
Thanks!
-
How do I send bot files? (I'm kinda new to all of this)
-
How do I send bot files? (I'm kinda new to all of this)
You can upload it to the Robot exchange here (https://gametechmods.com/forums/index.php?page=page4971) then find it here (https://gametechmods.com/Robot_Exchange/AW_Bots.php)
-
Thanks!
-
I'll send my entry in when I get time.
-
Updated Mosquito, my apologies
(https://gametechmods.com/uploads/images/7035Robot Arena 2 2013-04-22 22-11-45-357.jpg)
(https://gametechmods.com/uploads/images/87723Robot Arena 2 2013-04-22 22-11-55-690.jpg)
-
Dude, just start a showcase instead of posting in this thread.
-
bah
I may enter if i can bore myself enough to build stock aw
Dude, just start a showcase instead of posting in this thread.
Yeah, do this.
-
My entry is ready, I just wait to see if this will live...
-
I got 3 entries now. SHIELD's bot accepted.
-
:bigsmile:
-
I'm gonna make a sequel to my original stock AW, The 5 Year Old Arsonist. Soon.
-
My terrible jokey entry is pretty much finished. Only made it as a test, may be quite amusing to see how quickly it is murdered.
-
*Waiting for Venko to join this so I can get some revenge* :dumb)
-
Chaosmancer added.
-
Nope. I can AI for you
-
*Waiting for Venko to join this so I can get some revenge* :dumb)
Don't be so sure, "my subscriber" ;)
-
Is this thing even on?
-
Yes. Jonzu is banned.
-
Jonzu's banned?
-
Jonzu's banned?
Well, he is muted. He can still get PMs from people and log in but can't post or anything else.
-
lol 4 entries
-
lol 4 entries
He's been muted at least twice during sign-ups and he hasn't given a deadline for entries yet.
-
Whats the weight limit of Antweights?
-
125 or less.
-
ok, thanks
-
lol 4 entries
He's been muted at least twice during sign-ups and he hasn't given a deadline for entries yet.
Pretty sure one of the rules essentially says that it won't start until he has 16, 24, or 32 entries
-
If that's the case then this thing's gonna start around 2014
-
If that's the case then this thing's gonna start around 2014
I've just held a tournament with AW's plus I held one late last year also so people already have AW's they could enter which means 16 should be an easy number to reach if a deadline is given. If he doesn't get 16 by then he can use bye-bots.
-
Alright then.
-
Added Mechadino's entry. Since there isn't that much interest, I'll wait for until we have 16 entries.
-
let me build my entry first :P
-
Deadline: 1st of June.
I won't give extra days, so I recommend to hurry up.
-
Then, Jonzu, expect my entry very soon in a PM.
-
- Signups will be closed until I have received 16 entries.
^ Needs fixing :dumb) .
-
- Signups will be closed until I have received 16 entries.
^ Needs fixing :dumb) .
Done
-
Jonzu, did you get my entry?
-
Jonzu, did you get my entry?
Yeah... Fixed the entry list.
-
- Deadline: 1st of June
Entries
1. Jonzu95
2. Ianh05
3. S.H.I.E.L.D
4. Chaosmancer
5. Mechadino
6. RedlineM203
7. Venko
8.
9.
10.
11.
12.
13.
14.
15.
16.
3 days left and still only 7 people :(
-
Make that 8.
-
This will be the biggest tournament evar! \o/
-
Was that sarcasm?
-
Was that sarcasm?
Maybe
-
mfw stock aw
-
My money is on the box with the Shiny Hub Wheels and Razors.
Which narrows down the competitors, sort of.
-
My money is on the box with the Shiny Hub Wheels and Razors.
Which narrows down the competitors, sort of.
(https://gametechmods.com/uploads/images/88449AW%20-%20Stone%20Tablet.jpg)
(https://gametechmods.com/uploads/images/3550AW%20-%20Nunchucks.jpg)
(https://gametechmods.com/uploads/images/7429AW%20-%20BushWhacker.jpg)
(https://gametechmods.com/uploads/images/96797New%20AW.jpg)
Come at me razor weaklings!
-
Will make something tomorrow. It will hopefully be slightly unique.
-
Mines unique to my knowledge. :)
-
Signups are now closed. I got 9 entries, and Venko will have few days time to resend his entry.
And this will be the last CombatAnts, due to lack of interest.
-
what if i were to send you a robot right now to bring it up to 10
-
what if i were to send you a robot right now to bring it up to 10
Too late.