Author Topic: Bully - Signups CLOSED  (Read 7903 times)

Offline Shield

  • The question isn't who will let me.
  • Ultra Heavyweight
  • Posts: 2196
  • Rep: 8
  • It's who will stop me.
    • View Profile
    • Awards
Bully - Signups CLOSED
« on: August 03, 2013, 10:32:02 PM »
Ey, I decided to host a tournament!

Before we get onto the rules, I must state the general summary of this tournament. Your goal is to design the most destructive bot that you can.

Your victim: Tim.

Rules:
-DSL 2.1
-Standard building rules
-Combat Arena, hazards off.
-Weightclass is SHW/SuperHeavyweight.
-Only cheat parts allowed are:
-No NARmour Actually yes, it's not like Tim will be fighting back, but, I would prefer if you didn't. Otherwise, the next tournament wouldn't be as... fun. All other glitches are still banned, (Trov glitch, etc.)
-BFE is not allowed (unless it's for the Thermidor Wheels)
-Havoks are fine, unless the bot get's stuck in the ground or something, then that is an instant restart. If it happens a second time, it's another restart, until the match goes perfectly.
-No walkers and/or shufflers (Unless someone can provide me with the Bindings). No cheap Norris's either, glass cannons are okay.
-Popups are banned.
-Multibots are allowed, but their combined weight (Yes, their COMBINED weight) must be under the weight limit.
-If your bot requires smart zones I highly suggest you add them on yourself before sending them in to avoid: "YOU PUT THE SMART ZONE WRONGLY !!!!!11111!!!!"

Scoring:
-Each bot is given a 10 minute round with Tim.
-The bot who can destroy/immobilize Tim in the shortest amount of time wins.
-Immobilization results in no change of time.
-Knockouts will shave 10 seconds off your time.
-Your bot getting Immobilized results in a restart. If after 3 restarts and your bot still loses to Tim, you are listed as DNF.
-If your bot, somehow, someway, is KO'd by Tim, it is an instant DNF. No restarts.
-Should you enter a multibot, if one of the two bots is knocked out, the other can still continue.
-If your bot still isn't done destroying Tim even after 10 minutes, you are DNF'd.

SUBMITTING ENTRIES
-There is no need to AI your bots. However, if your bot uses smart zones and you don't add them on before sending them in, don't you dare complain about your bot being "AI'd wrongly"
-If you have custom bindings, please send them to me.
-Just because all 16 entries are filled doesn't mean you can't send in your bots. You can send them in for the next tournament which I am planning. But they won't be in THIS tournament.
-You are not signed up until your bot passes inspection. If you send in a bot and it is rejected, you must fix the errors. However, someone can take that spot while you are fixing said issues.

My entry:

Aaaaaaaand, that 'bout sums it up. There's only room for 15 entries so, yea.

Deadline is September 30th.

Entries
1. S.H.I.E.L.D
2. Mazakari
3. MassimoV
4. 090901
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
« Last Edit: October 21, 2013, 06:57:09 PM by S.H.I.E.L.D »
beep beep

Offline Naryar

  • Posts: 23267
  • Rep: 20
  • hybrids oui oui
    • http://www.youtube.com/us
  • Awards BOTM Winner
    • View Profile
    • Awards
  • Skype: TheMightyNaryar
Re: Bully-Discussion
« Reply #1 on: August 04, 2013, 12:22:41 AM »
Interesting, but this will be a rammerfest.

also I highly recommend you improve this bot because defensively it's poor.

Offline Pwnator

  • *
  • Posts: 6676
  • Rep: 15
  • Awards BOTM Winner
    • View Profile
    • http://pwnator.tumblr.com
    • Awards
  • See profile for gamer tags: Yes
Re: Bully - Discussion
« Reply #2 on: August 04, 2013, 12:38:36 AM »
Interesting, but this will be a rammerfest.

also I highly recommend you improve this bot because defensively it's poor.

A popupfest or hammerfest, rather.

But yeah, might be better off with something that's defensive against all types.
Clash Cubes 1 - Grey Matter (Runner-Up)
King of Karnage - Sideshow Freak (Runner-Up, Best Engineered)
Rust In Pieces - Paper Cut 3 (Grand Champion, Most Dangerous Bot)
Wheely Tag Tournament - Ion Thruster (Grand Champion, along with Ounces' DiSemboweLment)
UK vs USA - Dark Striker (Grand Champion)
Rust In Pieces 2 - Claymore (Runner-Up, Favourite Bot)
BBEANS 6 - Infection 4 (Runner-Up)
RA2 Team Championships - Serious Business, Skeksis (Runner-Up, along with Scrappy, S_M, and Badnik)
RA2 Team Championships 2 - The Other Stig (Runner-Up, along with Scrappy, S_M, Badnik, 090901, and R1885)
Replica Wars 3 - Abaddon (Runner-Up, Luckiest Bot)
BroBots - wheebot & yaybot (Runner-Up)
Robo Zone 2 - Dipper (4th place, Survival Champion, & Best Axle Bot)
ARBBC - The Covenant (3rd place, BW Rumble Winner, Most Feared BW)

Offline Shield

  • The question isn't who will let me.
  • Ultra Heavyweight
  • Posts: 2196
  • Rep: 8
  • It's who will stop me.
    • View Profile
    • Awards
Re: Bully - Discussion
« Reply #3 on: August 04, 2013, 12:42:21 AM »
There's a titanium halfsheet under there.

I think...
beep beep

Offline Pwnator

  • *
  • Posts: 6676
  • Rep: 15
  • Awards BOTM Winner
    • View Profile
    • http://pwnator.tumblr.com
    • Awards
  • See profile for gamer tags: Yes
Re: Bully - Discussion
« Reply #4 on: August 04, 2013, 12:46:03 AM »
Needs one on top and on the sides as well. Hammers and side hammers can take it out faster than rammers and popups.


Actually, at this rate, you could simply build a small bumble ball with DSL disks/steel sheets instead of weapons. Might go against the realistic rule, but at least the competition would be fair.
Clash Cubes 1 - Grey Matter (Runner-Up)
King of Karnage - Sideshow Freak (Runner-Up, Best Engineered)
Rust In Pieces - Paper Cut 3 (Grand Champion, Most Dangerous Bot)
Wheely Tag Tournament - Ion Thruster (Grand Champion, along with Ounces' DiSemboweLment)
UK vs USA - Dark Striker (Grand Champion)
Rust In Pieces 2 - Claymore (Runner-Up, Favourite Bot)
BBEANS 6 - Infection 4 (Runner-Up)
RA2 Team Championships - Serious Business, Skeksis (Runner-Up, along with Scrappy, S_M, and Badnik)
RA2 Team Championships 2 - The Other Stig (Runner-Up, along with Scrappy, S_M, Badnik, 090901, and R1885)
Replica Wars 3 - Abaddon (Runner-Up, Luckiest Bot)
BroBots - wheebot & yaybot (Runner-Up)
Robo Zone 2 - Dipper (4th place, Survival Champion, & Best Axle Bot)
ARBBC - The Covenant (3rd place, BW Rumble Winner, Most Feared BW)

Offline Shield

  • The question isn't who will let me.
  • Ultra Heavyweight
  • Posts: 2196
  • Rep: 8
  • It's who will stop me.
    • View Profile
    • Awards
Re: Bully - Discussion
« Reply #5 on: August 04, 2013, 03:30:54 AM »
Updated.
beep beep

Offline Merrick

  • *
  • Posts: 2528
  • Rep: 3
  • Half-decent IRL designs and terrible antweights.
  • Awards BOTM Winner
    • View Profile
    • Awards
Re: Bully - Discussion
« Reply #6 on: August 04, 2013, 08:11:28 AM »
I'd be interested in this.

Seems pretty original.

Offline Naryar

  • Posts: 23267
  • Rep: 20
  • hybrids oui oui
    • http://www.youtube.com/us
  • Awards BOTM Winner
    • View Profile
    • Awards
  • Skype: TheMightyNaryar
Re: Bully - Discussion
« Reply #7 on: August 04, 2013, 08:47:48 AM »
Now everyone will enter FSnS because you changed the design and we can't kill it easily with a ram.

Offline playzooki

  • A title is a prefix or suffix added to someone's name in certain contexts. It may signify either veneration, an official position or a professional or academic qualification. In some languages, titles may be inserted before a last name (for example,
  • Posts: 2122
  • Rep: -34
    • View Profile
    • click to download more ram
    • Awards
  • Skype: dont stalk me
Re: Bully - Discussion
« Reply #8 on: August 04, 2013, 08:59:49 AM »
What about flail shell spinners?

Offline Mecha

  • Ultra Heavyweight
  • Posts: 2140
  • Rep: 7
    • View Profile
    • Awards
Re: Bully - Discussion
« Reply #9 on: August 04, 2013, 09:01:43 AM »
I Like the originality. :)
« Last Edit: August 04, 2013, 09:45:52 AM by Mechadino »

Offline Shield

  • The question isn't who will let me.
  • Ultra Heavyweight
  • Posts: 2196
  • Rep: 8
  • It's who will stop me.
    • View Profile
    • Awards
Re: Bully - Discussion
« Reply #10 on: August 04, 2013, 10:38:29 AM »
Now everyone will enter FSnS because you changed the design and we can't kill it easily with a ram.

Hmm... you make a valid point. I remembered Two to Tango banning Shells and SnS. A poll deciding the fate of these bot types shall be put up once the weightclass has been decided.

What about flail shell spinners?

Read my reply to Nary.

I Like the originality. :)

I'd be interested in this.

Seems pretty original.

Surely thou art being sarcastic?
beep beep

Offline Resetti's Replicas

  • *
  • Posts: 4399
  • Rep: 18
  • Replica King
    • ResettisReplicas
  • Awards BOTM Winner
    • View Profile
    • Awards
  • See profile for gamer tags: Yes
Re: Bully - Discussion
« Reply #11 on: August 04, 2013, 11:21:05 AM »
You're going to want some top armor, otherwise axes will have a pretty easy time.  What will Tim's AI be?

Offline Shield

  • The question isn't who will let me.
  • Ultra Heavyweight
  • Posts: 2196
  • Rep: 8
  • It's who will stop me.
    • View Profile
    • Awards
Re: Bully - Discussion
« Reply #12 on: August 04, 2013, 11:30:53 AM »
You're going to want some top armor, otherwise axes will have a pretty easy time.  What will Tim's AI be?

It'll be a pusher.
beep beep

Offline Mecha

  • Ultra Heavyweight
  • Posts: 2140
  • Rep: 7
    • View Profile
    • Awards
Re: Bully - Discussion
« Reply #13 on: August 04, 2013, 11:48:10 AM »
I'm not being sarcastic,  I think this is original.  =)

Offline boombabyboom

  • Heavyweight
  • Posts: 465
  • Rep: 0
    • View Profile
    • Awards
  • See profile for gamer tags: Yes
Re: Bully - Discussion
« Reply #14 on: August 04, 2013, 11:56:52 AM »
time to spam 100+ razors on a rammer

Offline martymidget

  • *
  • Posts: 3458
  • Rep: 7
  • Mr Flibble is very cross.
    • http://tts.imtranslator.n
    • View Profile
    • :)
    • Awards
Re: Bully - Discussion
« Reply #15 on: August 04, 2013, 12:57:57 PM »
Honestly thought this was a thread about ty's lw HS.

Looks interesting.

Offline ty4er

Re: Bully - Discussion
« Reply #16 on: August 04, 2013, 12:59:49 PM »
kinda disappointed in the name :P

but it seems like a cool tourny, you'll need to make that bot a bit better though. i'll probably enter
DSL Showcase
is this bot don't lost all razors in a fight before do a damage thought

Offline 090901

  • alcoholic in denial
  • *
  • Posts: 7006
  • Rep: 22
  • :mrgreen:
  • Awards Donated money for site hosting 2019 GTMCS2 Divison Winner GTMCS Division Winner
    • View Profile
    • Awards
Re: Bully - Discussion
« Reply #17 on: August 04, 2013, 04:31:43 PM »
I don't see the need for cheat parts.

Offline Merrick

  • *
  • Posts: 2528
  • Rep: 3
  • Half-decent IRL designs and terrible antweights.
  • Awards BOTM Winner
    • View Profile
    • Awards
Re: Bully - Discussion
« Reply #18 on: August 04, 2013, 07:14:47 PM »
I don't see the need for cheat parts.

Me neither. Make it so cheatbot2 is not allowed.

Especially seeing as you've just copied/pasted from Battlebots, so Beta hammers will be dominant. I know a robot I've built with them that would be perfect for this.

Offline Shield

  • The question isn't who will let me.
  • Ultra Heavyweight
  • Posts: 2196
  • Rep: 8
  • It's who will stop me.
    • View Profile
    • Awards
Re: Bully - Discussion
« Reply #19 on: August 04, 2013, 07:30:47 PM »
time to spam 100+ razors on a rammer

Good luck getting through that steel V.

kinda disappointed in the name :P

but it seems like a cool tourny, you'll need to make that bot a bit better though. i'll probably enter

That bot is the outdated version, I just updated it. Will update the post.

I don't see the need for cheat parts.

I want to give other builders the freedom to practically do anything they want, any kind of weapon set up.

I will remove the beta hammers though, I only just found out how unbalanced they are.
beep beep