Author Topic: Wolfsbane's supertastic showcase of stuff (Read 29968 times)

Mr. AS · « **Reply #80 on:** April 20, 2012, 12:06:28 PM »

mount all of the drive on the blue snappers and less empty space

ty4er · « **Reply #81 on:** April 20, 2012, 12:10:46 PM »

or just get rid of the blue snappers alltogether and get 2 snappers for the wedges on just extenders, no t-connecters.

otherwise it isnt that bad for a rammer except the space.

Wolfsbane · « **Reply #82 on:** April 21, 2012, 12:46:43 PM »

had to sacrifice the wedge, but more weapons. I used pole spikes and axe heads at the end because it would be underweight otherwise.

Comments?

NFX · « **Reply #83 on:** April 21, 2012, 12:49:16 PM »

Better. What you could do, if you need to use up weight (you really want irons rather than pole spikes and axe heads), then you could swap the Nifty for a second Blackvolt, or remove it entirely and shrink the chassis as much as possible to get even more irons on there. Or razors, if you're running out a little bit. You really shouldn't use worse weapons purely for the sake of eating up weight.

Can I ask where all the weight's gone? Are there two weapon racks on there or three, because that would explain most of it.

Wolfsbane · « **Reply #84 on:** April 21, 2012, 12:50:22 PM »

Quote from: NFX on April 21, 2012, 12:49:16 PM

Better. What you could do, if you need to use up weight (you really want irons rather than pole spikes and axe heads), then you could swap the Nifty for a second Blackvolt, or remove it entirely and shrink the chassis as much as possible to get even more irons on there. Or razors, if you're running out a little bit. You really shouldn't use worse weapons purely for the sake of eating up weight.

but wouldn't it be underpowered then?

NFX · « **Reply #85 on:** April 21, 2012, 12:51:22 PM »

Quote from: Wolfsbane on April 21, 2012, 12:50:22 PM

Quote from: NFX on April 21, 2012, 12:49:16 PM
Better. What you could do, if you need to use up weight (you really want irons rather than pole spikes and axe heads), then you could swap the Nifty for a second Blackvolt, or remove it entirely and shrink the chassis as much as possible to get even more irons on there. Or razors, if you're running out a little bit. You really shouldn't use worse weapons purely for the sake of eating up weight.

but wouldn't it be underpowered then?

Nope. 1 Blackvolt is enough to power 4 HPZ's for a three minute match. Since most of the matches are 3 minutes, you should be fine.

Wolfsbane · « **Reply #86 on:** April 21, 2012, 01:19:38 PM »

how's this?

NFX · « **Reply #87 on:** April 21, 2012, 01:23:38 PM »

Very good. A little generic, but not to worry. Drive motors could be aligned a little bit better, in my view.

Mr. AS · « **Reply #88 on:** April 21, 2012, 03:45:47 PM »

how many irons

Wolfsbane · « **Reply #89 on:** April 21, 2012, 05:34:27 PM »

Quote from: Mr. AwesumSauce on April 21, 2012, 03:45:47 PM

how many irons

40 i believe

is there anyway to attach an HPZ-tek on a blue snapper besides snapper loading? i always screwing it up and crashing my game

NFX · « **Reply #90 on:** April 21, 2012, 05:40:03 PM »

Yes, but it is vastly more efficient to Snapper Load them on. If you take a look at Obvious Pseudonym from RoboLeague, the weapon motor there was fixed directly to the SnapperII, I think. There's a LW VS in my showcase somewhere that definitely has a direct SnapperII-bursted HPZ as a weapon motor.

Wolfsbane · « **Reply #91 on:** April 21, 2012, 05:42:21 PM »

Quote from: NFX on April 21, 2012, 05:40:03 PM

Yes, but it is vastly more efficient to Snapper Load them on. If you take a look at Obvious Pseudonym from RoboLeague, the weapon motor there was fixed directly to the SnapperII, I think. There's a LW VS in my showcase somewhere that definitely has a direct SnapperII-bursted HPZ as a weapon motor.

can you teach me? i always make it go so fast RA2 crashes

NFX · « **Reply #92 on:** April 21, 2012, 05:45:17 PM »

How do you mean by "go so fast"? There's a video Sage has that outlines Snapper Loading pretty well.

Wolfsbane · « **Reply #93 on:** April 21, 2012, 05:52:01 PM »

Quote from: NFX on April 21, 2012, 05:45:17 PM

How do you mean by "go so fast"? There's a video Sage has that outlines Snapper Loading pretty well.

i mean the motor spins so fast the game can't process the speed (faster than a chickn drill) and it crashes

NFX · « **Reply #94 on:** April 21, 2012, 06:01:20 PM »

That sounds a bit like your computer might be a bit slow to process it. Either that or you've modified the game in some obscure way. You need to spin the RAD motors as fast as possible in order to make the Snapper Loading glitch work.

Mr. AS · « **Reply #95 on:** April 21, 2012, 06:25:32 PM »

does it tip forward at all

also

Quote from: Mr. AwesumSauce on August 11, 2011, 01:57:26 PM

Quote from: Mechadino on August 11, 2011, 01:56:06 PM
Quote from: Mr. AwesumSauce on August 11, 2011, 01:46:25 PM
Don't use ballasts.
I think ballasts are good for making your wedge better.
Just wait until Nary hears this!

EWEWEWEWEWEWEW WHY DID I SAY THIS EWEWEWEWEWEWEWEWEW #OCCUPY GAMETECHMODS UNBAN SPARKEY

Wolfsbane · « **Reply #96 on:** April 22, 2012, 04:02:29 PM »

Quote from: Mr. AwesumSauce on April 21, 2012, 06:25:32 PM

does it tip forward at all

also
Quote from: Mr. AwesumSauce on August 11, 2011, 01:57:26 PM
Quote from: Mechadino on August 11, 2011, 01:56:06 PM
Quote from: Mr. AwesumSauce on August 11, 2011, 01:46:25 PM
Don't use ballasts.
I think ballasts are good for making your wedge better.

yes it does, sadly

If twisted metal RA2 works, this is going to be my entry, based off of this http://twistedmetal.wikia.com/wiki/Piecemeal

(Image removed from quote.)

DSA, irons and a flamethrower. Mostly an artbot like Wrecktangle though. Thoughts?
Just wait until Nary hears this!
EWEWEWEWEWEWEW WHY DID I SAY THIS EWEWEWEWEWEWEWEWEW #OCCUPY GAMETECHMODS UNBAN SPARKEY

Mr. AS · « **Reply #97 on:** April 22, 2012, 04:06:27 PM »

Quote from: Wolfsbane on April 22, 2012, 04:02:29 PM

yes it does, sadly

rotate the outermost extenders so that the ironsconnected on that round extender (perferably red

) touch the ground and serve as stabilizers

you can also do that with the inner extenders too if you want

Wolfsbane · « **Reply #98 on:** April 22, 2012, 04:08:45 PM »

Quote from: Mr. AwesumSauce on April 22, 2012, 04:06:27 PM

Quote from: Wolfsbane on April 22, 2012, 04:02:29 PM
yes it does, sadly

rotate the outermost extenders so that the ironsconnected on that round extender (perferably red ) touch the ground and serve as stabilizers

you can also do that with the inner extenders too if you want

kk, will try l8tr
what do you think of piecemeal?

Mr. AS · « **Reply #99 on:** April 22, 2012, 04:20:21 PM »

Quote from: Wolfsbane on April 22, 2012, 04:08:45 PM

what do you think of piecemeal?

its... big?