gametechmods
Robot Arena => Showcases => Stock Showcases => Topic started by: TeamXtreemer on August 11, 2010, 09:30:26 AM
-
Im Making An Stock Showcae, Expect Bots In 30 Or So Mins.
-
(https://gametechmods.com/uploads/images/65063screenshot.png)
Plastic 1
Thanks Ianh For The Chassis
-
How many pinks?
-
I'm going to guess that there's 2 in there, least I hope only 2 :P 3 is overkill for just 2 RAD's. Try to only use round connectors on AW's because every single Kg counts.
Good luck building AW's :mrgreen:
-
I'm going to guess that there's 2 in there, least I hope only 2 :P 3 is overkill for just 2 RAD's. Try to only use round connectors on AW's because every single Kg counts.
Good luck building AW's :mrgreen:
Ty, and ill change it to 2 pinks, i just used 3 cuz u had 3 in the chassis usend me.
-
New Antweight Hammer, K.
(https://gametechmods.com/uploads/images/87107K.png)
(https://gametechmods.com/uploads/images/95105K2.png)
(https://gametechmods.com/uploads/images/35036K3.png)
125kg Ecactly :)
2 Pinks
Plastic 1
-
try facing the bots in the last couple of teams in that AI pack :gawe: can opener and toy drumset should be a challenge. looks good though.
-
Kinda worried about its range there. Instead of attaching the extender sideways, just make the whole setup straight (kinda like a popup) so it has a farther reach. :D
-
Mmkay pwn, and ill try now.
-
Oh chuff it, BUMP...
Heres A New Bot, And Yes, I Did Use The Childs Play IV Chassis, So Dont Moan.
Heres My New BW, They're Coming For You
(https://gametechmods.com/uploads/images/41384screenshot_1.png)
-
Heh, I like it.
-
Thanks
-
Heh, I like it.
/\I second this/\
-
Oh chuff it, BUMP...
Heres A New Bot, And Yes, I Did Use The Childs Play IV Chassis, So Dont Moan.
Heres My New BW, They're Coming For You
(https://gametechmods.com/uploads/images/41384screenshot_1.png)
You can you plastic + Ztek on a snapper + Nifty and shines if you redesign the chassis
-
Rubbers are mostly weight wasted.
-
Ground Clearance, And Also To Fill In Weight, it Beats Most of SC
-
You can you plastic + Ztek on a snapper + Nifty and shines if you redesign the chassis
[/quote]
Say What?
I Have No Idea What You Just Said...
-
Basically, downgrade to Plastic and use shinies, and then you'll be able to use a HP Ztek as your spinner motor, which is A LOT better than what you have now. Other than that, great start to stock.
-
I have plastic.
and ill try with the shiny buisnes.
-
It worked, An Am Happeh...
Its Still 172, What To Do With 3 Killograms
-
Upgrade to Aluminum.
-
NO
-
Upgrade to Aluminum.
NOOOOOOOOOOOOO!
-
Upgrade to DSA
Here i fixed it
-
*Groans*
-
Noboddys gonna sloow me doown... OYEAH.
I made a POPUP...
ITS PROBOBLY RUUBISH...
IF SOMEONE WANTS TO MAKE A WEDGE...
FEEL FREE!
!
Its called Overdrive
Plastic
1 Supervolt
The rest... LOOK FOR YOURSELF YOU LAZY SO AND SO.
(https://gametechmods.com/uploads/images/68941Heehe.png)
-
Weight?
-
The casters should go on the corners, where they stick out and can act as armor of sorts. But otherwise, it looks good.
-
@ Somebody: 233.1 Now i modified it
@ Click: I Modified It.
Im gonna put it on the BOTEXCHANGE some one please put a snapper2 wedge on.
-
You're not going to learn anything if you let others do the hard work for you !
-
Doesnt matter, i done it, and i got 2 casters at the corners.
i got a snapper2.
and am trying to get a controll board somewhere.
-
PLEASE PUT A CONTROLL BOARD ON...
sorry for the tp...
http://filebin.ca/bvwykw/OverdriveTooh.bot (http://filebin.ca/bvwykw/OverdriveTooh.bot) or http://filebin.ca/bvwykw (http://filebin.ca/bvwykw)
-
Triple post...
FOTEPX did it, and i thanked him. (he put the controll boartd and the burst motor in (the snapper2s)
(https://gametechmods.com/uploads/images/74718OD3.png)
235.1 kg
-
Blue snappers aren't suited for weapon uses.
-
Thats what i thought, but i cant fit a ddt on.
-
Rebuild the chassis!
-
NEVER.
-
Then fit a snapper 2 !
Also try to remove that angled connector, it's wasting weight...
NEVER.
Lol it's stock. If you never rebuild a chassis to fit better components you'll never become good.
-
I thought youd say something about the angle connecter, im not being funny but, it needs to be central (the wedge)
And i cant refit all the bloody components back on...
ill try.
-
You can if you try hard enough and have a good chassis :P
The wedge needs to be central BUT that's not a reason to waste 5 kg. I would make a slightly longer chassis, or snapper load.
-
If i could i would, and to be honest, im trying to controll board stack the controll board but am failing, and if that was moved i could fit a ddt, nary, lets get this staright...
I CANT REBUILD IT, I HAVENT GOT THE ABILITY...
IF YOU FLAME ME BECAUSE OF THIS THEN ILL JUST IGNORE YOUR POSTS.
and i dont know how to snapperload.
-
All caps = SRS BSNS
-
I am not flaming you, merely giving you advice.
If you do not know how to snapper load, then go and learn in sage's sig. It's not difficult really.
All caps = SRS BSNS
You are right... though he needs help right now, not off topic posts :P
-
Ok, ill go to find sages sig...
-
Ok, ill go to find sages sig...
Good luck
-
the link is down...
So a poem to confort you...
[Worthless crap]
please someone fit a ddt...
http://filebin.ca/umqznn/OverdriveTree.bot (http://filebin.ca/umqznn/OverdriveTree.bot) or http://filebin.ca/umqznn (http://filebin.ca/umqznn)
-
the link is down...
So a poem to confort you...
TTTTATTATAATAAAAAAARARARARRARAATATARTARTARTARTARTARATRATRATRATRATARTARTARTARTARTARATRRETARDJDHGBVJYSEGFVYUSGVDUEHVESFJDuihighhhhfbhuidhfviudhfuivbhfuihbuidfhdihofhhvichdvhsifhviuaduiadfihbTHE DAVINCHI CODE dfhjvbjhevhgadfhvgiuahgiuvahduuidfhguidhvuihfdiuhfuihrihewfohiduhgbihgirehgiehuhughuheu HOLY AHIT A FLYING SAUSAGE ROLL!!!!!!!!!!!!! rehgvjfbvbarfhbvheihcihifuh
please someone find the link..
You know this forum has a tutorial and tips section AND a search bar...
-
Oyeah...
-
the force is not on my side, i need the wmm firefox plugin but idont have
-
CMON SOMEONE PUT THE FREEKIN SNAPPER OR THE DDT ON!
-
yo yo yo, you don't need a firefox plugin. Go to https://gametechmods.com/forums/index.php/topic,4512.0.html (https://gametechmods.com/forums/index.php/topic,4512.0.html) and click on the button that says "snapper loading." then download the video
-
i cant download.
just someone put it on.
-
You won't get better if you keep pleading for help rather than accepting a challenge.
-
Just someone please show me how wi5hout a video...................
-
Do you know how to axle load? If you do, snapper loading will be a breeze.
-
no.
-
Err... if only there's an awesome text version of this. >.<
*aherm*
Let's start off with a RAD. Wire it with a button, and press that button until the RAD reaches full speed. You might hearing it glitching out. While at full speed, quickly click another tab (like chassis or paint). At this frame of time, the RAD's still spinning at full speed. Click that button again BUT again quickly shift to another tab. Spin, shift, spin, shift. The axle should be disconnected from the motor after a few tries. There you go, you have loaded an axle.
To snapper load, just attach a RAD to a snapper and load the RAD's axle out. After a few more tries the snapper's arm will be loaded out as well.
If you still don't get it, just ask FOTEPX (I think he knows). If he doesn't know, make him watch the video and make him teach you lolz
-
Err... if only there's an awesome text version of this. >.<
LURK MOAR PWN :rage
https://gametechmods.com/RA2wiki/index.php?title=Axle_Loading_Glitch (https://gametechmods.com/RA2wiki/index.php?title=Axle_Loading_Glitch)
-
I said 'awesome', not 'average'. :P
-
I said 'awesome', not 'average'. :P
Fair enough...
...THEN MAKE SOMETHING BETTER !!!!11
-
I DONE IT!!!!!
but the controll board sont fit...
-
I DONE IT!!!!!
but the controll board sont fit...
It's stock, i'm sure you could stack the control board somewhere, even if you think it "sont" fit
-
id like to see you try.
-
id like to see you try.
Is that a clever ruse to get someone else to do your work for you once again?
Look up a stacking tutorial using the search bar i showed you earlier if you still can't do it.
-
1. no
2. i got the tut, and it diddnt tell me how to do a supervolt to a ctrl board
-
please SOMEONE help me.
-
1. no
2. i got the tut, and it diddnt tell me how to do a supervolt to a ctrl board
Well it should be possible,unless your chasis is too low in which case you could always rebuild the chasis, you'll need to at some point anyway to keep it airtight.
Oh and posting cries for help isn't gonna help you here.
-
all i asked wasfor someone to help me stack a ctrl board ion a sv.
-
all i asked wasfor someone to help me stack a ctrl board ion a sv.
So you do want someone to do it for you.
-
There is no set method. Do it yourself like I did on Bunsen Burner 5.
-
ENOUGH FAIL IN THIS SHOWCASE FOR NOW OR I WILL LOCK IT.
About stacking a control board in a supervolt, it is time-consuming but doable. It's just about moving SLOWLY the control board into the supervolt (any elevation), generally it must slightly stick out of the supervolt (put the supervolt first, then CB)
Generally, it takes a few tries and quite a bit of patience but it's doable.
-
ok, i gave up and made onwe without a snapper wedge, its jjst too difficutl.
-
ok, i gave up and made onwe without a snapper wedge, its jjst too difficutl.
Matty, all you need is a truckload of patience. It took me 15 minutes just to stack a supervolt yesterday. If you are 100% sure you cannot stack it, try changing the camera angle and the zoom.
-
\i has no mouse wheel, anyways, check brthe thread i put in ther chatterbox.
-
You can zoom with other buttons.
-
You can zoom with other buttons.
I'm pretty sure I can't on my laptop.
I can still get by though.
-
(https://gametechmods.com/uploads/images/3822675465193af36.jpg) (http://pixpipeline.com/d/75465193af36.jpg)
-
you should use the GTM image host, its so much better
ditch the static wedge and DDT and use Blue snapper + green snapper combo for the wedge and weapons respectably, loose the irons, razors are better and finally ditch the casters as they do nothing.
-
Why is he using FOTEPX's part skins?
-
.. im guessing Fotepx gave him them? :P
-
Can you post a picture like everyone else ?
This is required BTW.
-
dont worry I fixed it for him, reuploaded it on GTM
-
BAW BAW I HATE YOU...
Casters... ...you know something...
BAW BAW BAW...
Bleh Bleh
*ABUSE*
-
you should use the GTM image host, its so much better
ditch the static wedge and DDT and use Blue snapper + green snapper combo for the wedge and weapons respectably, loose the irons, razors are better and finally ditch the casters as they do nothing.
The bot's a mess anyway.
The use of castors show that you know SOMETHING, but even then they're too low and poorly positioned to be effective.
Ram plates are best for the frontal protection there as it covers a larger area.
Razor/iron mix setup is counter-productive.
Static wedge=instant fail.
Gonna get flanked easily anyway.
Wasted space with the control board that could just be put above the black.
Scorpion, i have a feeling you are being a douche to me on purpose, and joe, im not too good with the jargon, please rephrase
-
put the control board over the black and put in a DDT wedge
-
ive tried to, its really hard, it never works, ill try sommore.
-
Hardly, it's constructive criticism, can't take it and use it properly, that's your fault, not mine.
Especially considering you've been on here longer than me, there's no excuse really.
And yes, if you want one wedge, atleast make it a DDT wedge as badnik said.
-
The bot's a mess anyway.
Because THATS constructive.
dont act like you own the place.
-
He isn't.
-
TX...
*headshake*
Just ignore that and use the advice given. No offense, but you're beginning to show symptoms of Sparkey Syndrome.
-
He is giving you advice on how to improve the robot, it's not really his fault if you Spark out on him. If you follow his advice, then the robot will be much more competitive.
-
Scorpion is only harsh because he is like that.
And because he doesn't likes you as well. While this is probably not rational, there IS a reason why Scorpion dislikes you, and as far as I can tell, is the same reason why I dislike you. Not rational as well, I will say, and unlike what I want to be, but there is a REASON some people here dislike you.
And for what I know, that reason is that you have been acting to make a fool out of yourself most of the time.
Now either you are smart and follow Scorpion's advice (which is perfectly good in content), and you will probably rise up in his esteem and ours as well, either you rant, this showcase gets closed because of your inability to take advice and whine.
Understood ?
-
offs someone actually stick up for me...
-
Don't show the Sparky syndrome!
-
offs someone actually stick up for me...
We'll stick up for you if you should be stuck up for.
-
if i want into someones showcase and said there bot was a mess youd all flame me
-
It'd depend on if the bot was a mess or not.
-
offs someone actually stick up for me...
Sigh, hoping you wouldn't do this, but it seems you have.
Nar's hit the nail on the head there.
And the reason you talk about is perfectly showcased earlier on in this showcase, inability to take constructive critisicm.
I'm hardly gonna give out lots of advice that is wrong simply to try and show you up, other people would pull me up on that so it would be pointless and make me look worse.
As Nar said, take the critisicm and learn from it and then you will start to be more respected, aswell as ofcourse a better builder.
Or you could ignore it, whine about it, and pretend your bot's perfect as is, then the whole cycle will be repeated (only I'll probably be far more harsh and aggressive) with the next bot you showcase.
And If the bot is a mess, then it's justified.
I remember one of the first bot's I showcased, Nar simply said a gut ripper would destroy it.
You know what I did?
I asked how to fix the problem.
-
Woah, since when did this become a flame war?
-
Ok, how can i fix it???
-
Doing what scorp said!
-
Ok, how can i fix it???
By not posting about it further and rebuilding the bot! Don't even reply to this post saying "OK sorry" or whatever, just do it so everyone can move forward and try not to let it happen again.
-
well.. we cant even reply to a showcase on this forum anymore..
I think people need to consider weight when they tell people what to do, far to much people suggest the impossible with weight :P
-
Scorpion is only harsh because he is like that.
And because he doesn't likes you as well. While this is probably not rational, there IS a reason why Scorpion dislikes you, and as far as I can tell, is the same reason why I dislike you. Not rational as well, I will say, and unlike what I want to be, but there is a REASON some people here dislike you.
And for what I know, that reason is that you have been acting to make a fool out of yourself most of the time.
Now either you are smart and follow Scorpion's advice (which is perfectly good in content), and you will probably rise up in his esteem and ours as well, either you rant, this showcase gets closed because of your inability to take advice and whine.
Understood ?
That being said, I'm starting to regret telling you to stay. If you continue to act this way, I'm gonna show you a little place called "syphers showcase pages 23-65"
-
get back on topic
-
Bump
Made an antweight, i havent tested it, am going to soon
(https://gametechmods.com/uploads/images/96098AWWVS.png)
124KG
Plastic
No name.
-
Small wedge would be better.
-
Okay. i'll fix that now
-
Doned
(https://gametechmods.com/uploads/images/11366AWWVSII.png)
1 pink (same as before)
123KG
Plas1
-
I Think That You Have Misplaced Your Memory Of Where Your Stock Version Is
That Is Apparently The DSL Version You Are Using If I Am Not Mistaken
-
It looks... kinda useless
-
I Think That You Have Misplaced Your Memory Of Where Your Stock Version Is
That Is Apparently The DSL Version You Are Using If I Am Not Mistaken
No.
No.It looks... kinda useless
Its meant to be a hs, but i am updating now.
-
New Robot.
Its Meh. Based Off Some Random Idea I Had.
(https://gametechmods.com/uploads/images/71249NIGZ.png)
-
Interesting idea, how damaging is it?
-
Interesting idea, how damaging is it?
Quite.
-
A VS
(https://gametechmods.com/uploads/images/2206Bear.png)
-
Okay, now you need to make that a multibot, with the other robot being called...
You know it Matty...
VISHKA!
VISHKOPHSHKI!
-
Okay, now you need to make that a multibot, with the other robot being called...
You know it Matty...
VISHKA!
VISHKOPHSHKI!
YOU MAKE IT AND VE CAN BE TAG TEAM
-
Those wedges are pretty useless. Would be better with iron spikes or something as side stabilizers.
Bear claws would probably be good weapons on a VS though.
*is inspired to make a bear claw VS*
-
OH sh**, YOU INSPIRED CLICKBEETLE
YOU HAVE MADE A LIVING FOR YOURSELF, TX.
-
OH sh**, YOU INSPIRED CLICKBEETLE
YOU HAVE MADE A LIVING FOR YOURSELF, TX.
(http://scienceblogs.com/whitecoatunderground/upload/2009/06/my_head_just_asploded/your-head-asplode.jpg)
-
Made S'more Schitt.
(https://gametechmods.com/uploads/images/28730Bearclawn.png)
Its Call'd Bearclawn.
Its 174 or 5 i think.
-
I personally like Bear Claws because they aren't commonly used, good bot overall
-
Thanks bud.
-
No problem, when you posting your AWFaceoff entry then? ;)
-
GHEEEEEEEEEEEEEEEEY
I hate bear claws.
Don't know why, I just do.
-
No problem, when you posting your AWFaceoff entry then? ;)
Tomorrow.
And last time i checked, My bot wasnt bright pink and strutting round a large homosexual nightclub with sexual partners on either side.
-
No problem, when you posting your AWFaceoff entry then? ;)
Tomorrow.
And last time i checked, My bot wasnt bright pink and strutting round a large homosexual nightclub with sexual partners on either side.
You're such a bad liar TX :D
-
YOU GOT ME BRO.
-
YOU GOT ME BRO.
Mwahahahahahaha!!!!!!!! But anyways, back on topic
-
Yeah, by the way my AW is A Red HS AW Stock WAAA
-
Yeah, by the way my AW is A Red HS AW Stock WAAA
Screw the tournament lets have an AW challenge XD
-
Shameless Bump.
(https://gametechmods.com/uploads/images/25560Mason-Stcok.png)
It's a rough design, extender work is a mess and the motor are exposed, but I felt like I should contribute.
-
Shameless Bump.
(https://gametechmods.com/uploads/images/25560Mason-Stcok.png)
It's a rough design, extender work is a mess and the motor are exposed, but I felt like I should contribute.
It's good, but it's look a lot better with a good paint-job. ;)
Also, Pinks might not power this well enough, 140+140+400=680
a black would power it fully, but it'd be too much weight.
I'd probably put in a nifty.
-
Nifty + Less Drive + DSA +Plow
Or Nifty +Less Drive + Plastic + MORE WEAPONS
Or Nifty + 1WD +DSA + EVEN MORE WEAPONS
Got some options!
-
Thanks Guys.
-
Use a nifty. Pinks just fail.
And yes, you can do better in extender work. Notably, you could just use 3 baseplate anchors and a slightly larger chassis, or just a T-connector for the drive motors and 1 extender for the HPZ, but you will need to rotate your snapper 90 degrees clockwise for this.
-
Ill get to work later.
Thanks.