Author Topic: Wacky Bob's Workshop (Read 64678 times)

NFX · « **Reply #360 on:** May 01, 2011, 12:37:10 PM »

An axle sawbot? Now that is an interesting idea. I know S_M's one works, 'cause he's got a hundred and eleventy fourteen sawblades on his, but how much damage does this one deal out?

Jack Daniels · « **Reply #361 on:** May 01, 2011, 12:42:51 PM »

Lots of empty space. Cool concept. I think you should tighten it up a bit to gain some weight to spend and invest in a couple of maces to wedge in the corner between the irons and wedges. That way you can protect those red extenders that can get lobbed off pretty easy. Couple of short blades could do the trick too, like how they protect extenders on pro-popups.

Otherwise, I like.

Clickbeetle · « **Reply #362 on:** May 01, 2011, 04:53:34 PM »

Whuh... how does that beat Vox???

I can see it beating other wedges, rammers, and VS's if the wedges are good, but the sides look too exposed to be good against HS's if you ask me.

Interesting idea, anyway.

Wacky Bob · « **Reply #363 on:** May 04, 2011, 03:53:22 PM »

Enigm@ · « **Reply #364 on:** May 04, 2011, 03:59:06 PM »

Quote from: Wacky Bob on May 04, 2011, 03:53:22 PM

(Image removed from quote.)

Needs moar razors, only needs one wedge, use DDT's for weapon motors, yada,yada,yada.

Fracture · « **Reply #365 on:** May 04, 2011, 04:13:35 PM »

Well, the results won't lie, I'm impressed. (Neglected Waterbug o_O)

-Flatter chassis wedge maybe?
-You can power those motors with a Nifty.
-It seems like the wedge extenders could be easily ripped off...I notice there are no Battleshots of HS on there. :P Make the wedges shorter or protect them.
-What armour?

Wacky Bob · « **Reply #366 on:** May 04, 2011, 04:18:18 PM »

Quote from: Fracture on May 04, 2011, 04:13:35 PM

-What armour?

DSA. I always use DSA.

Quote from: Fracture on May 04, 2011, 04:13:35 PM

I notice there are no Battleshots of HS on there. :P

I just tested him against Anti-Popup designs and Killer Heavyweights.

...

Gimme a second...

Wacky Bob · « **Reply #367 on:** May 04, 2011, 08:32:56 PM »

All those bots are Horizontal Spinners.

Enigm@ · « **Reply #368 on:** May 04, 2011, 08:36:07 PM »

Quote from: Wacky Bob on May 04, 2011, 08:32:56 PM

(Image removed from quote.)

All those bots are Horizontal Spinners.

Dethbawks? :3

Virus Bomb · « **Reply #369 on:** May 04, 2011, 09:52:19 PM »

What version of Starcore you got? I doubt that could beat the SCv4 Maelstrom.

J · « **Reply #370 on:** May 05, 2011, 12:57:05 AM »

Bob used my skinpack.
Love it.
(Which reminds me, I need to make an updated version)

Oh, and that sawbot idea of yours is actually pretty interesting.
Since the sawblades do damage regardless of them spinning, they pretty much act as giant razors(Well, maybe not as powerful, but you get the idea)

Wacky Bob · « **Reply #371 on:** May 05, 2011, 06:46:42 AM »

Quote from: Virus Bomb on May 04, 2011, 09:52:19 PM

What version of Starcore you got?

Version 3. I might get Version 4 soon.

Quote from: J on May 05, 2011, 12:57:05 AM

Since the sawblades do damage regardless of them spinning...

That's exactly why I used axles. I used HP Z-Teks on the first prototype, and then I was like, "Oh yeah, saws do the same damage no matter if the saws are moving or not." So I used axles to save weight and put on more weapons. Also, since axles don't need batteries, the batteries can focus on the drive motors and the bot can go faster. Plus, even with axles, it's still good at gut-ripping, too.

J · « **Reply #372 on:** May 05, 2011, 09:35:14 AM »

Quote from: Wacky Bob on May 05, 2011, 06:46:42 AM

Plus, even with axles, it's still good at gut-ripping, too.

Like I said, sawblades are just larger razors, but aren't as powerful.

Hard Bot · « **Reply #373 on:** May 07, 2011, 06:42:59 PM »

-Use Shiny Hubs.
-Use irons, not razors.
-Take off the ramplate.

Ben Purse · « **Reply #374 on:** May 07, 2011, 06:43:41 PM »

Quote from: Hard Bot on May 07, 2011, 06:42:59 PM

-Use Shiny Hubs.
-Use irons, not razors.
-Take off the ramplate.

Razors are better then irons.

090901 · « **Reply #375 on:** May 07, 2011, 07:24:53 PM »

Quote from: Ben Purse on May 07, 2011, 06:43:41 PM

Quote from: Hard Bot on May 07, 2011, 06:42:59 PM
-Use Shiny Hubs.
-Use irons, not razors.
-Take off the ramplate.
Razors are better then irons.

Only in some cases.

madman3 · « **Reply #376 on:** May 08, 2011, 08:01:05 AM »

Quote from: 090901 on May 07, 2011, 07:24:53 PM

Quote from: Ben Purse on May 07, 2011, 06:43:41 PM
Quote from: Hard Bot on May 07, 2011, 06:42:59 PM
-Use Shiny Hubs.
-Use irons, not razors.
-Take off the ramplate.
Razors are better then irons.
Only in some cases.

Here they are though.

Wacky Bob · « **Reply #377 on:** May 08, 2011, 08:37:17 AM »

Quote from: Hard Bot on May 07, 2011, 06:42:59 PM

-Use Shiny Hubs. Pop-ups need low-ground clearance so it's easier to get under bots and harder for others to get under it.

-Use irons, not razors. Razors are more damaging than irons. Even though they're more fragile, they suit pop-ups better because it's difficult to knock them off, since they retract back into their hidey-hole.

-Take off the ramplate. Why? Pop-ups need protection to fend off Horizontal Spinners, too.

NFX · « **Reply #378 on:** May 08, 2011, 08:45:03 AM »

I would shorten the wedges, personally, they look like they could be taken off quite easily. That should get you another 12 or so kg to play with, maybe to add a couple more razors with. I say keep the ramplate, but the sides are more often where the HS will hit. Keep the Rubbers as well, if you have the weight for them.

Wacky Bob · « **Reply #379 on:** May 12, 2011, 06:02:02 PM »

Built this in a rush:

I was in the mood to make a de-weaponer, and then I decided to make it wedgy. It's got DSA, as always, 2 HP Z-Tek drive, one Nifty, and Snapper Wedges. I might give it Rubber Wheels in an update, but I'm not sure if I should. Anyway, I don't like it very much, but I love the name for some reason.

In other news, this is my first bot with a control board stacked in a Nifty!

Wedged De-weaponer: An idea in progress.