gametechmods
Robot Arena => Showcases => Stock Showcases => Topic started by: trumpetguy on June 06, 2009, 10:37:34 PM
-
(https://gametechmods.com/uploads/images/33037DMSIS.bmp)
-
If you're too lazy to cut out images to help our internet speed we are too lazy to help you with your bots. And believe me, that bot does need help.
-
Pics are too small on splash.
-
may i say? weird splash
-
paint splash ftw :-D:-D:-D but yes those pictures are too travel size, bigger ones will help.
-
paint splash ftw :-D:-D:-D but yes those pictures are too travel size, bigger ones will help.
yeah, can barly see anything> what stands out though are pink batts< which i heard are ussless exept on lw
-
Paint is hard especially on a laptop, trying to save my stock version it freezes everytime I try to start it up, and I didn't use F11, I just said print screen.
-
I'm using a laptop with very little trouble. If you're talking about it being hard using the touch pad, get one of those little mice you can plug in the side of your lappy. Its what I use and the only drawback is the right click on mine doesn't work, but I just press the right click button underneath the tp and alls good. =)
EDIT: Also if you're having trouble with saving your game, post it in more detail in the technical support section.
-
Reinstall stock acidentilly didn't save team..... *New Bot* (first page)
-
Shrink the chassis so you can have all maces. And remove the extender sticking out of the inner extender. You can eFFe the maces in instead.
-
effe would save you 12 kg ... and yeah shrink the chassis a bit
-
Well I made one bot for RAW 2 but it's between these 2 so which one do you like the most?
(https://gametechmods.com/uploads/images/31276Waterspout.jpg)
-
get a wedge. get rid of that chassis wedge, because it will only make you more open to attacks
-
^ ItI
-
Chassis wedges are bad, but decent against non wedged HS.
-
:?what does ItI stand for?
-
Which one do you prefer more?
-
niether
-
:?what does ItI stand for?
Insult to Injury
A bot in BBEANS.
-
Insult to Injury
A bot in BBEANS.
I doubt it'd be like ItI. That was competent in a tactical way. If a bot goes up the wedge, it could be pinned and have their undersides grinded down by the spiked clubs.
Meanwhile the first bot here would knock bots away with it's weapon, thus losing any wedge advantage. If it gets a chance to get it because it looks like the spinner goes infront of the bot.
I'm unsure about the second but that isn't so well thought out anyway.
-
(https://gametechmods.com/uploads/images/68694Preview.jpg)
An extremely small preview of my RAW bot.
-
(https://gametechmods.com/uploads/images/68694Preview.jpg)
An extremely small preview of my RAW bot.
Hmmm... the two bots you showcased before couldn't pull that off.
It's not a popup, that's clear.
-
Get starcore4
-
Can you send me the D/L link to it?
-
Its in my showcase... Somewhere...
-
https://gametechmods.com/uploads/files/StarcoreV4Alpha2.zip (https://gametechmods.com/uploads/files/StarcoreV4Alpha2.zip)
Here
-
Raw 2 entry
(https://gametechmods.com/uploads/images/87052screenshot.bmp)
Just a regular SNS I'm trying to make this happen constantly, since right now it only happens if certain conditions are met.
(https://gametechmods.com/uploads/images/58360screenshot_1.bmp)
-
cools
inside shots plz?
-
I would rather keep that confidental after all the bots are sent in to RAW, you know to keep my design original-ish.
-
Roboman you are an idiot if you can't figure out the insides. The bot is okay not really original like you think
also
https://gametechmods.com/forums/showthread.php?t=2143
jpgz plz
-
no i dont know the insides. nifty or black? where the hpzs are? if he stacked the cb.
-
*Hint* Try adding the weight of the components first.
-
http://www.youtube.com/watch?v=QijqzjlgwJQ
will post inside picks later after I finish the update. might get better skins too.
-
You beat two rammers, a hammer, the worst LW in starcore, and a side hammer and a lucky win against Tempus with an HS. Impressive!... ><
-
sarcasm detected!
try shrinking the chassis and switching to irons.
-
I have to ask, is this an improvement in my stock building or downgrading it?
-
improvement. But dont listen to RMs advice because that will just make your bot Generic.
-
(https://gametechmods.com/uploads/images/74089Fail.jpg)
Crap says it all. First bot (had to do some searching) I still palay with this with the original stock.
-
(https://gametechmods.com/uploads/images/43383d.png)
Wondering why I'm posting an unfinished bot?
This is why: (https://gametechmods.com/uploads/images/77786ds.png)
Forgot to convert to jpg, sorry.
-
5 razors on a Snapper 2... you gotta be kidding right ?
-
Yea..the firing is kinda slow, might change it to 2 razers each add more batteries, add more drive, and frontal protection.
-
noob driving detected. one reason I say this is because you can't drive straight on in the BBEANS arena...
-
:approve:n00b driving indeed :approve:
-
AI it, and fight in the Combat Arena without hazards.
-
Well I shrunk it down to a MW:
(https://gametechmods.com/uploads/images/51481Unfinished Business 3.png)
Wish I can use a black or nifties instead but then I have to redesign *sigh*. The out side things are for either extra armour or added wedge effectiveness, personally I like the emergency wedge one.
Edit: Yes I beat Flamming Whizzer!
-
practical n00b driving response, he just pretends to not notice Sage's comment...
-
It is kinda hard not to n00b drive in BBEANS v2 arena, but it is not immpossible.
-
Use the combat arena!
-
How about the RA2T #2?
http://www.youtube.com/watch?v=Ev7r5VWkH50
-
Don't use pinks.
-
This time, do AI battles. :P
-
Nice wedges.
-
It was meant to show off the wedges, might take a while for me to AI, but ok.
-
DP
What do you think I can use the extra 350 Kg on?