Author Topic: Scrap Daddy Design (Read 90084 times)

Scrap Daddy · « **on:** March 09, 2008, 12:29:32 PM »

Well I decided I would make a showcase here just for those that still come here. Ill post all the robots that I make here if I remember. 4 snowplows, 4 ramplates, 3 blacks, 8 razors.:-D My other Showcasehttp://robotarena.com/wizforum/forum_posts.asp?TID=6416&PN=1&TPN=47

Naryar · « **Reply #1 on:** March 09, 2008, 12:35:27 PM »

Waoh, violent.

I like the name. *evil grin*

I just wonder HOW you put these plows and ramplates like that?

Scrap Daddy · « **Reply #2 on:** March 09, 2008, 12:42:28 PM »

Effe glich. Off the snapper its a 40 cm extender with a snowplow, then an angle connection thing, 80 cm enteder with snowplow on it, folowed by 2 t connecters with ramplates. Heres another bot I made recently.

Naryar · « **Reply #3 on:** March 09, 2008, 12:50:35 PM »

Nice too. My favourite bot design :D. Ha, I just understand how you stacked the two Zteks on your weapon... yeah, that thing about spin motors being more powerful if you put them on a servo or burst.

You just put them on a Snapper II, right?

Scrap Daddy · « **Reply #4 on:** March 09, 2008, 12:59:42 PM »

Yeah they're on a snapper II

Scrap Daddy · « **Reply #5 on:** March 12, 2008, 07:27:42 PM »

Ive decided I would start working on a new team. I havent seen Bear claws get used since....well....BEAR. The names are not permanent.

Naryar · « **Reply #6 on:** March 13, 2008, 09:47:15 AM »

Looks wild. Nice bots, but with all these glitches used, he might be a little unstable? (or at least may lose some grip)

Hmm, I tried the servo-enhanced spin motors... waoh, it's insane. Some days ago I upgraded Tribute to Mayhem (stock) with Zteks put on servos, instead of sole Zteks.

Shameful... Could do three 1000-hits in one second and the record is nearby 8000 damage in one second (with an hybrid stock DSL, just replaced the Ztek by an Eteks and 1m disc). But the major problems is that the bot is more unstable and the spikes fly off really FAST.

Do you think a spin motor on a burst motor is more powerful than a spin motor on a servo? At least it's more practical because you can make the extender point the right way...

black panther · « **Reply #7 on:** March 14, 2008, 02:01:55 PM »

I Think a spin motor with a servo damages more wildly than with a burst.

In the long run, burst motors are a lot more effective because a spin motor with a servo slows down after 5-10 secs and has a great potential to cause Havok explosions.

Scrap Daddy · « **Reply #8 on:** March 15, 2008, 08:22:27 PM »

Servos and snappers are equally good to stack with. Sometimes the snappers are easier to work with because you dont have to picture what your bot will look like before you build like you have to do with the servo. Snappers are less stable, IMO, and servos are more stable. Also the hw has perfect control. It works fien and never gets unstable unless its missing a lot of its claws.

Scrap Daddy · « **Reply #9 on:** March 22, 2008, 02:11:33 PM »

2 new bots. The first ones a Sitn N' Spinner and the second ones a Borg Queen with irons.

Naryar · « **Reply #10 on:** March 22, 2008, 03:30:45 PM »

OMFG! How the

can you put a little less than 25 components on the same motor? Normally the game engines stop at 10 perhaps!

And you just stacked 5 black batts, right?

Scrap Daddy · « **Reply #11 on:** March 22, 2008, 03:40:59 PM »

Nope it stops at 7. I didnt pass it either. Its servo-disc-ztek-tribar-ztek-tribar-iron. 7.

Im almost sure you cant stack 5 black batts in one place. Its only 3. It doesnt need to last much longer than 10 seconds. =P

RA2lover · « **Reply #12 on:** March 22, 2008, 04:39:21 PM »

how much batteries on the SitNSpinner?
the disk is just BEGGING to be hit by a hammer.
RAD drive on a HW is just plain immobile.

Naryar · « **Reply #13 on:** March 22, 2008, 05:00:33 PM »

RA2lover he put three black batts: that's just enough to power correctly the Zteks but not the 2 right angles.

Quote from: RA2lover;7017

the disk is just BEGGING to be hit by a hammer.

Yea. I was thinking this too. Especially as I have a anti-HS hammer specially designed for that :)

Nice stacking BTW. And for me, I spend minutes to find the right position to stack just TWO black batts ...

Scrap Daddy · « **Reply #14 on:** March 22, 2008, 05:21:10 PM »

Hehe try an get that close to even use that hammer.
2 pinks on the SNS and I think RAD drive is fine in this case. It attacks from all angles and is fairly mobile.
Stacking black batts take about 10-30 seconds for me. I use the zoom glitch to zoom as far as I can in on the battery, and move it up and down until it stacks. 3 in one place takes me sometime 10 seconds some times maybe 5 minutes.

Heres my bot for Unkowns tournament. You might want to join it Naryar. It hasnt started yet.

Naryar · « **Reply #15 on:** March 22, 2008, 06:37:32 PM »

Try what? You want to see what does it do when I use it properly?

Thanks for inviting me to the tournament Scrap Daddy, but if it's MW ...count me out before I get mauled, i totally SUCK at building 'em and I fear I'll allways be. The previous I built can't even own Deadbeat properly...

Scrap Daddy · « **Reply #16 on:** March 22, 2008, 07:11:33 PM »

Show in inside pic of it in your showcase. Im interested. =O

Naryar · « **Reply #17 on:** March 22, 2008, 10:12:29 PM »

Done. If you need more written explanations, just ask.

For unknown's tournament, kind of you to offer me the chance to participate, but I think I won't. My MWs suck, as said.

...But another thing will be the next stock HW tourny...

Scrap Daddy · « **Reply #18 on:** March 23, 2008, 06:25:21 PM »

Ok suit yourself. New robot. Good because it can get in before most spinners can get up to speed.

Scrap Daddy · « **Reply #19 on:** April 04, 2008, 09:42:53 PM »

Okies 2 new robots. The first is a little lw hs and the second is an amazing unamed FlaIL Bot. I was at my friedns house who has RA2 and my favorite bot was a bot named Dizzy bee or something.....I tried to improve it.....