NC's stock showcase

[Pwnator]

You have more than 10 KG to play around with there, i'd consider extending the wedges for one. Not if the wedges are good enough already.

And wait, 4 blacks? I'm hoping that's a typo.....
You only need 2 Blacks for this bot. Nope. You need 3.

[Scorpion]

And wait, 4 blacks? I'm hoping that's a typo.....
You only need 2 Blacks for this bot. Nope. You need 3.

From the how power consumption works topic:

For a typical HW popup with 4 HP Z-tek drive and 4 DDT's, you need 100 (x4) + 312.5 (x4) = 1650 total BEMIOR, which is about 2 Supervolts.  Remember that these are minimum values, however, and your motors may start slowing down depending on how much total power you have.

This has 2 DDTs right? So 2 supervolts should be all you need.

[NFX]

2 Blackvolts give 1600 Power, so you're actually underpowering it very slightly. It can work, but you do need it to be a quick match.

[nightcracker]

I asked inf how many blacks his popup has and he said 4 because it gave it that little bit extra pepper, so I copied it.

[infiniteinertia]

I asked inf how many blacks his popup has and he said 4 because it gave it that little bit extra pepper, so I copied it.

This goes for anyone...try to find a popup with 2/3 blacks that performs as consistently and lethally as one with 4. It's Pysc's rule of four...Two DDT's (weapons)+ 4 HP Drive = 4 Blacks.

[J]

I asked inf how many blacks his popup has and he said 4 because it gave it that little bit extra pepper, so I copied it.

This goes for anyone...try to find a popup with 2/3 blacks that performs as consistently and lethally as one with 4. It's Pysc's rule of four...Two DDT's (weapons)+ 4 HP Drive = 4 Blacks.

MORE STACKING IS REQUIRED
[Challenge Accepted.jpg]

[R0B0SH4RK]

I asked inf how many blacks his popup has and he said 4 because it gave it that little bit extra pepper, so I copied it.

This goes for anyone...try to find a popup with 2/3 blacks that performs as consistently and lethally as one with 4. It's Pysc's rule of four...Two DDT's (weapons)+ 4 HP Drive = 4 Blacks.

R4 had 2 blacks. It had more than enough power. You should know, it knocked you out of BBEANS :P

[Sage]

According to clickbeetle's power consumption, Inf is wrong O:

[infiniteinertia]

4 blacks = more power.

[nightcracker]

Alright, another lw in this thread: Slice'nDice

245.9kg
DSA (!)
1 nifty
Exostacked baseplate anchors <3
Everything else clearly seen in the picture



The choice was either a shiny hub or plastic, and since it's very stable with the shiny I went for the former.

[Somebody]

Find a way to turn the RADs so that the motor isn't sticking into the direction of the spin.

[nightcracker]

Like this?

[Somebody]

Much better. Was the point of the original to be an undercutter or does it work the same the other way around?

[nightcracker]

Just the same, not sure which is better.

[nightcracker]

Hmm, expected much more comments on my SnS.

Anyway, here is a new version of BlueBox:



248.9kg
pretty much invincible front (the snapper works as a caster, it cannot be destroyed)
1 nifty
DSA
6 razors
Bursted RAD drive, Bursted Z-Tek weapons

Sadly my drive and weapon setup (read: extender work) is very heavy, leaving no weight for a plow.

[NFX]

1) How in the did you manage to put a SnapperII there?
2) Is it invertible?

[nightcracker]

1) How in the did you manage to put a SnapperII there?
2) Is it invertible?

1) It just exostacks like that, ask RA2.
2) Yes.

[NFX]

Nice. I really, really like that. Like a more stable version of Singularity. Thing is, you really only need two, possibly three extenders for the drive/weapons, so you should be able to get a plow on there, or two casters side-by-side.

[nightcracker]

Nice. I really, really like that. Like a more stable version of Singularity. Thing is, you really only need two, possibly three extenders for the drive/weapons, so you should be able to get a plow on there, or two casters side-by-side.

The major problem is the drive. The SnapperII MUST be on baseplate level (not elevated), or it won't exostack. This means that I require some ugly extender work to get the drive to mid-level.

Unless you have a better setup recommendation ofcourse :D

Currently I use 2 extenders for the weapon setup, that setup is pretty good and pretty much the only way to get the weapons at invertable height.

But I use 4 extenders and a t-connector for the drive =S

[NFX]

You really could get the drive extender work lightened. You could easily get away with only two or three extenders there, it doesn't necessarily have to be perfectly central.