Author Topic: Naryar's Stock Stuff (Read 90200 times)

infiniteinertia · « **Reply #200 on:** September 14, 2008, 11:58:07 AM »

Does that one drive straight?

Naryar · « **Reply #201 on:** September 14, 2008, 12:40:15 PM »

Yeah. Begins to drift after 10 meters, but pretty nice.

DuckRA2 · « **Reply #202 on:** September 14, 2008, 05:01:14 PM »

maybe iron spikes on the ends? to protect wheels sort of, well im not an expert but its what i think

Clickbeetle · « **Reply #203 on:** September 14, 2008, 05:34:32 PM »

The wheels look well enough protected as it is, and the maces are wider than spikes so it would be easier to ram with them. I don't see any way to improve that bot. Nice work.

Edit: Did you try removing and replacing the wheels on that first bot? It doesn't matter how the weight is distributed now if it was distributed unevenly when the wheels were first attached. It's one of those weird quirks of RA2.

Naryar · « **Reply #204 on:** September 15, 2008, 02:07:57 AM »

Yea, I could use irons, (and for SnS'ing could be useful), but these maces are best in HS defense (because wider, yeah)

________

No Click, I didn't thought of that. I noticed too that the wheel's collision meshes were regular polyedrons. I used that on my last HW popup months ago: turning the wheels on their axles (motors) so that they are all touching the ground on a flat edge. But no.

Naryar · « **Reply #205 on:** October 03, 2008, 08:58:10 AM »

Hey guys, I've started AIing. That's long, but fun to see your bot de

I'm beginning by my lightweights.

First, Collision Course, just reskinned and renamed.

Code: [Select]

list.append((&quot;Torch Cutter&quot;,&quot;Pusher&quot;{'invertible':True,'nose':math.pi,'radius':0.05,'topspeed':99,'throttle':160,'turn':70,'turnspeed':1.5}))

He charges neatly, but after the first blow (that nearly killed Tempus Fugit), and then (being close to the other bot) he drives like a bitch, because rather than pushing the other bot or backing up for a ram, he makes half-turns, leaving it's wheels really vulnerable, and he even pushes the enemy bot with it's REAR.

And same if i put the Rammer .py.

___________

Then, I AIed Black Ram... oh, that's right i didn't showcased it

Code: [Select]

list.append(("BW-Black Ram","Poker",{'invertible':True,'nose':math.pi,'radius':0.1,'topspeed':99,'throttle':160,'range':99,'turn':50,'turnspeed':2.5,'weapons':(1,2)}))

This one is just awesome when AIed. Only flaw, he loses his weapon easily.

I've put Black Ram in Omni too but I don't see any difference.

Naryar · « **Reply #206 on:** October 06, 2008, 04:59:34 AM »

Another! I wanted since a long time to make a side hammer. I loved Ancient Leviathan. And here it is... Embodiment of Ruin!

Build that in 1 hour, including 5 minutes at least finding the right chassis.

This is supposed to be my Atom Smasher rebuild too for Summer Magic... Inf, is this okay?

_________

EDIT: I tested it, and I NEVER thought it could own Little Darling in 10 seconds.

R0B0SH4RK · « **Reply #207 on:** October 06, 2008, 07:19:01 PM »

Cool, except Atom Smasher was a MW.

The wheels are also a bit too far back of the bots centre, and the drive looks a bit slow. Otherwise, pretty good.

infiniteinertia · « **Reply #208 on:** October 06, 2008, 09:09:20 PM »

Well Walrus is the only HW...so ok.

Naryar · « **Reply #209 on:** October 07, 2008, 04:55:14 AM »

That was a HW? Oh snap that's right.

I was planning to make him a pusher hybrid, not a rammer hybrid, so i just put 2WD.

I'd get it painted right and will change the extenders to red ones, and send it to you Inf.

Do you still need to put the blue snowplows on Raptor?

Naryar · « **Reply #210 on:** October 16, 2008, 01:43:44 PM »

Nothing exceptional, but

Devil at the Doorstep 2.

28 axes :icon_twisted:

Ended up underweight. Still OWNED Borg Queen and Vortex CE. Did won against Little Darling after 1:40 of mayhem.

Somebody · « **Reply #211 on:** October 16, 2008, 02:33:30 PM »

Maybe put in some small batteries. I know that they are bad and all, but if you put afew smaller airtanks in, you would have room. I think that a few pinks where a nifty won't fit wouldn't hurt much, and btw, I think it is better to have pinks and build to the weight limit, than leave 50 pounds left over.

somestrangeguy · « **Reply #212 on:** October 16, 2008, 05:24:52 PM »

Nice. You could propably fit in 30-32 axes if you used the attachment method I used for Spearhead in my showcase. Dont ask me how I did it, because i have forgotten as its been a long while since i made that one. But I do remember alot of piston firings, pausing and frustation.

Naryar · « **Reply #213 on:** October 16, 2008, 05:30:14 PM »

Quote from: somestrangeguy;17534

Nice. You could propably fit in 30-32 axes if you used the attachment method I used for Spearhead in my showcase. Dont ask me how I did it, because i have forgotten as its been a long while since i made that one. But I do remember alot of piston firings, pausing and frustation.

Piston eFFeing?

Also, I'm experimenting on piston snapper loading.

Sage · « **Reply #214 on:** October 16, 2008, 05:55:19 PM »

maybe some wheel guards. it would also look cool(er) if you used rubber wheels. i think they have better traction.

Clickbeetle · « **Reply #215 on:** October 18, 2008, 09:26:16 PM »

I was going to say widen the chassis a bit in the back (or else replace that big air tank with several little ones if you don't want to rebuild) and put some baseplate anchors in for some side plows or something.

Or, you could make a bigger chassis and add some wedges.

That's a great bot, even with the unused weight.

DuckRA2 · « **Reply #216 on:** October 19, 2008, 12:18:22 PM »

matbe you could make it with 2 or 3 pistons?

Naryar · « **Reply #217 on:** October 23, 2008, 06:49:28 PM »

Look at the weight.

Somebody · « **Reply #218 on:** October 23, 2008, 06:51:35 PM »

Did you put steel on that?!?!?!?

If you did: FAIL

Naryar · « **Reply #219 on:** October 23, 2008, 06:53:41 PM »

Quote from: Somebody;18461

Did you put steel on that?!?!?!?

If you did: FAIL

DSA.