gametechmods
Robot Arena => Showcases => Stock Showcases => Topic started by: Craniumbasher24 on November 07, 2012, 08:11:15 AM
-
My first stock showcase
Name: Final Destination
Weapon:4 razors on axles
weapon motor: Normal Z-tek
Drive: RADS
Battery:1 Black
(https://gametechmods.com/uploads/images/24393Holla.jpg)
This is my first vertical flail spinner
i can follow advices...... :)
-
Very good for a start. May want to put the motor higher, build to weight limit, use a HP ztek, and put the wedges higher so the bot isn't prone to going on it's back.
-
i may well follow that it wobbles allot thnx
-
Protip:If it was sent by anyone with a colored name it is IMMEDIATLY worth listening to what they say.
Also, flails arent very good in stock as they can face inwards and be absolutely useless.So rid yourself of the axles to save weight and and get better weaponary from what you have, which also is actually semi decent.
-
For example, replace the axle with an extender rotated so that the attachment point is facing outward, and attach another extender to that. That way you can line up razors next to each other
-
Protip:If it was sent by anyone with a colored name it is IMMEDIATLY worth listening to what they say.
Also, flails arent very good in stock as they can face inwards and be absolutely useless.So rid yourself of the axles to save weight and and get better weaponary from what you have, which also is actually semi decent.
flails are useful for disc hs and sns.
but yes, flail vs are mostly useless and are for originality only. and if you want this to be better, you should upgrade the drive motors, make it so the wedges are parallel to the ground, and add more weaponry.
-
I may as well do that but its hard to rotate the extenders to the right place can you please help me how to rotate the right way?
-
I may as well do that but its hard to rotate the extenders to the right place can you please help me how to rotate the right way?
If you download Sage's Skin Pack (https://gametechmods.com/Robot_Arena2/Misc/Sage_Skin_Pack.rar (https://gametechmods.com/Robot_Arena2/Misc/Sage_Skin_Pack.rar)) it has a marked extender.
-
Well then iLL try it thnx..
-
And Here's my upgraded version of final destination removed the axles increased battery power, ascended the wedge, hp z-tek drive.....
(https://gametechmods.com/uploads/images/21775screenshot_2.jpg)
-
much better, but you dont need 2 blacks for this, a single nifty should do the job
also rotate the zteks 90 degrees so you can use shinies
-
This my Rammer
Battery:2 blacks
Drive: HP z-tek
armour: DSA
Weapon:16 axeheads
(https://gametechmods.com/uploads/images/96670screenshot_6.jpg)
Suggestions can be made.... :bigsmile:
-
you don't really need armor everywhere
lighten your extender work, also remove 1 black and replace it with a nifty. 1 black + 1 nifty is ideal for a 4WD HW rammer.
-
well ok i'll remove the back armour to become lighter secondly i'll add a spinner upward so i can gut rip some thing :gunz:
and another can i ask how to creat your own skin??
-
dont use square extenders unless they are the 140cm ones that weigh 5kg
-
Don't add a spinner to it, just keep adding weapons.
-
Download the 1.4 patch and use the Snapper II to mount wedges etc, it's lighter though a bit bigger iirc.
And to create your own skin, go onto the paintjob section of the lab, find "Export texture", do that and edit the skin in paint.net, gimp etc and once you're done go back onto paintjob, click "Import texture" and import it.
-
well thnx i used square extenders because i can turn them easily than the round ones i know square extenders are heavier than the round ones
-
well thnx i used square extenders because i can turn them easily than the round ones i know square extenders are heavier than the round ones
There's probably a custom texture that highlights the side where the APs are. But idk, I gave up on stock a while back.
-
Okay here's an update to my rammer infernal newbie
(https://gametechmods.com/uploads/images/5574screenshot_8.jpg)
removed the plows
changed from 4 wheel drive to 6 wheel drive
Holla :dance:
-
Okay here's an update to my rammer infernal newbie
(https://gametechmods.com/uploads/images/5574screenshot_8.jpg)
removed the plows
changed from 4 wheel drive to 6 wheel drive
Holla :dance:
Just use Shinies and 1 Black, and shrink the chassis.
-
Its ok sorry about the pink bat it was my brother fault :gunz:
-
Its ok sorry about the pink bat it was my brother fault :gunz:
what
-
1 Black
No, that's nonsense. Do you know why 36HS use 2 blacks despite having 6 motors, like this bot ?
-
Well i was trying to stack 2 supervolts but didn't wotk so hard :gunz:
-
1 Black
No, that's nonsense. Do you know why 36HS use 2 blacks despite having 6 motors, like this bot ?
36HS =/= Rammer
and in his beetlebro site he made a rammer with only 1 black, and it was awesome (speaking of which, here it is:
http://beetlebros.gametechmods.com/tutorials.htm (http://beetlebros.gametechmods.com/tutorials.htm))
-
And thats what i followed good time good time.
-
1 Black
No, that's nonsense. Do you know why 36HS use 2 blacks despite having 6 motors, like this bot ?
36HS =/= Rammer
and in his beetlebro site he made a rammer with only 1 black, and it was awesome (speaking of which, here it is:
http://beetlebros.gametechmods.com/tutorials.htm (http://beetlebros.gametechmods.com/tutorials.htm))
hey guess what batteries power
motors
and guess what they both have in common
same amount of motors
and anyway 2 blacks is better for lasting longer in matches which is what most rammers need.
also stacking blacks isn't too hard, you just need a little bit of patience. iirc there were a few stacking tutorials by sage/someone else which is pretty good
-
i like how instead of gauche, its now naryar and ty4er giving the bad advice here
1 Black
No, that's nonsense. Do you know why 36HS use 2 blacks despite having 6 motors, like this bot ?
because on 36hs you have ~4 of the motors with 90+ kg on them, so they need to be at full force the entire match.
i even have a quote from le sage face on it
You only need ONE black for this.
If spinmotors take 100 amps each, and blacks give out 800, then 6 motors only need 1 black. For 36HS you want two because the spin motors have a lot of weight on them and you need max power for longer, but with rammers you really only need the first ram to be at max.
Use the rest of the weight on weapons or armor.
-
1 Black
No, that's nonsense. Do you know why 36HS use 2 blacks despite having 6 motors, like this bot ?
You only need 1 black. For both HW rams AND HS.
Rams stand no chance against wedge and can only win by de-weaponing against a HS.
And 2 black on HS is stupid too. Tell me which matchup does a HS need another 20 seconds of full power at the cost of 3 bear claws. Against Popup? Nope you either kill or be dead by then. HS? Well I took out a black in BEAR, add 3 claws, and run it again the old BEAR, guess which one wins? Against FSnS? Ram? Nope weapon weight matters more there too.
-
In clickbeatles tutorial he made 6 hp z-tek rammer with only one black and he's said its ok yo use one black holla :dance:
-
One of the simplest and best reasons why 6WD rammers use 1 black is because they usually have 4WD steering. 36HS have all motors in play so they have to remain fully powered.
-
:gunz:holla for that..
-
Here's my 12 mace HS
(https://gametechmods.com/uploads/images/5931screenshot_10.jpg)
2 black bat
z-teks(HP) drive and weapon motor
DSA
name:Homologium
p.s.: Cannot build to weight limit...
-
Snapper IIs are your friend.
-
why is that..?
-
You don't need more than one black.
and yes you may want to learn how to overlap stuff with snappers.
-
Here is my other Rammer but this one is slow
(https://gametechmods.com/uploads/images/87258screenshot.jpg)
It has 48 iSpikes 6 singlepicks
1 black
2 Hp Z-tek
-
heck you even gave it the same paintjob as dark july...
you are overkilling in batts. 1 nifty or even 2 pinks should suffice for this, but i would go with 1 nifty
-
yeah it's pretty much a dark july clone.
You probably didn't know what dark july is, so it's fine. Besides everyone can have a slow rammer, right ?
-
Yeah, put in a nifty and more spikes.
-
Don't know who's darkjuly?
-
Don't know who's darkjuly?
A rammer my friend FamoWX made for BBEANS 5
-
Oh.
-
Just asking, but what AI pack are you using now?
-
I don't use Ai packs... holla
-
You should. Stock AI is not a worthy fight at all.
-
wut kinds of ai packs should i use for stock???
-
StarCore 3.0 or 4.0 and PyscoloneAI. Can't remember where the links are though, someone else could give the download links.
-
Done and download thnx
-
after a long time im bach.
(https://gametechmods.com/uploads/images/77932screenshot_3.jpg)
Well here's my popup
Has Z-teks(hp)
supervolt , stacked pinks 2 on each
6 razors effe'd you know..
-
Remove the pink batteries and ballast, and try to add snapper and wedge.
-
you know the purpose of the ballast is to increase wedgeness ive put 4 pinks so thee ddts are not under powered..
-
Remove this ballast ! No excuses accepted !
-
after a long time im bach.
(https://gametechmods.com/uploads/images/77932screenshot_3.jpg)
Well here's my popup
Has Z-teks(hp)
supervolt , stacked pinks 2 on each
6 razors effe'd you know..
Add wedges on snappers (like at your 1st bot), and reduce amount of razors to 3-4.
-
Calm down... ok I'll remove the ballast and add a wedge...
-
(https://gametechmods.com/uploads/images/25223screenshot_4.jpg)
Update!!!
-
If that is not DSA I will cry
-
Its DSAAAAA.
-
get stock 1.4, use a snapper II and moar razorz.
-
i did it won't fit
-
then at least move the snapper 2 into the middle to use less weight on extender work
and im sure shinies are faster than rubberwheels.
-
all wheels in stock have the same traction that means they have the same speed and about the snapper two it's ok..
-
If you can't get moar razors, twist them about with the shift key until they fit together, that usually works.
-
There are actually 3 extenders and 3 razors on each DDT.
-
Don't put you wedge like that.
-
and im sure shinies are faster than rubberwheels.
no
-
More bots comin' soon..
-
(https://gametechmods.com/uploads/images/79855screenshot_9.jpg)
Here's my walker fun to play with but not battleworthy..
And here's my cassius like flipper
(https://gametechmods.com/uploads/images/32003screenshot_10.jpg)
-
just use 2/3 razors tips on the lw, and 1 black should do fine, get rid of the nifty
also you dont need batteries for servos to work, just a cb
-
Okie doki then.
-
here's my 36 hs 2 zteks are effe'd
(https://gametechmods.com/uploads/images/7803screenshot_0.jpg)
holla holla :dance:
-
here's my 36 hs 2 zteks are effe'd
(https://gametechmods.com/uploads/images/7803screenshot_0.jpg)
holla holla :dance:
Change the Drive motors to HP Z-Teks and mould the Chassis to fit the components.
-
here's my 36 hs 2 zteks are effe'd
(https://gametechmods.com/uploads/images/7803screenshot_0.jpg)
holla holla :dance:
Change the Drive motors to HP Z-Teks and mould the Chassis to fit the components.
Sylandro is actually right for once. Also, I think one black will be enough.
-
No it won't, just stack the blacks.
-
No it won't, just stack the blacks.
1 black gives out 800 whatever
1 hpz takes in 100 whatever
It's fine.