Author Topic: J's Bots (Read 104795 times)

J · « **Reply #380 on:** January 04, 2011, 05:42:18 PM »

Quote from: NFX on January 04, 2011, 05:19:46 PM

I would put some more razors on, but I would add a couple more ramplates on the front.

Ehh.. I think 2 is fine.

Quote from: Naryar on January 04, 2011, 04:53:10 PM

Quote from: freeziez on January 04, 2011, 04:19:52 PM
MOAR RAZORS!!!!1

Yet again, another highly constructive post.

This is an 11/10 topic. You usually expect it.

Quote from: freeziez on January 04, 2011, 05:26:32 PM

Actually, he could put a few more razors on. Minimize chassis space, too.

It was already mentioned that I could put more razors on it.
Just gimmie' a minute.
(or so)

Naryar · « **Reply #381 on:** January 04, 2011, 06:01:54 PM »

Quote from: freeziez on January 04, 2011, 05:26:32 PM

Quote from: Naryar on January 04, 2011, 04:53:10 PM
Quote from: freeziez on January 04, 2011, 04:19:52 PM
MOAR RAZORS!!!!1

Yet again, another highly constructive post.

Actually, he could put a few more razors on. Minimize chassis space, too.

Maybe he wants irons ? Irons are technically better than razors, you know.

J · « **Reply #382 on:** January 04, 2011, 08:34:14 PM »

Quote from: Naryar on January 04, 2011, 06:01:54 PM

Quote from: freeziez on January 04, 2011, 05:26:32 PM
Quote from: Naryar on January 04, 2011, 04:53:10 PM
Quote from: freeziez on January 04, 2011, 04:19:52 PM
MOAR RAZORS!!!!1

Yet again, another highly constructive post.

Actually, he could put a few more razors on. Minimize chassis space, too.

Maybe he wants irons ? Irons are technically better than razors, you know.

But 1 Iron is pretty much the same as 2 Razors.
So I would have to cut back on like 2 more motors to upgrade to irons.
...
And that defeats the purpose

NFX · « **Reply #383 on:** January 04, 2011, 08:55:59 PM »

I think I would add two more ramplates on the front to start with. HS's tend to hit the sides of the bot more often, and the chassis's just too big to have adequate protection from two ramplates on their own.

J · « **Reply #384 on:** January 04, 2011, 10:21:52 PM »

Quote from: NFX on January 04, 2011, 08:55:59 PM

I think I would add two more ramplates on the front to start with. HS's tend to hit the sides of the bot more often, and the chassis's just too big to have adequate protection from two ramplates on their own.

I'm not exactly sure how I would place more ramplates on the front, but ehh... I'll try to think of something.
In the meatime, Team completed:

I'm going to fine-tune them a bit, obviously, THEN claim it as being "done".
.....
Now I'm not sure what to make my next team O,o

Badnik96 · « **Reply #385 on:** January 04, 2011, 10:24:59 PM »

Well its strange and lulzy, and that's what J is known for. So good for him.

Co sidering the only thing that can get to the chassis directly is Mome Rath, Its darn tricky to kill. But exposed extenders = omnomnomnom

J · « **Reply #386 on:** January 04, 2011, 10:28:48 PM »

Quote from: Badnik96 on January 04, 2011, 10:24:59 PM

Well its strange and lulzy, and that's what J is known for. So good for him.

Because I have a fetish for making things that are different from the norm.

Quote from: Badnik96 on January 04, 2011, 10:24:59 PM

Co sidering the only thing that can get to the chassis directly is Mome Rath, Its darn tricky to kill. But exposed extenders = omnomnomnom

Yea, I'm thinking about re-arraning the Snappers in Trash Compactor, so I can (hopefully) fit more ram plates on him.
That, or just remove the side plates that I added just now, and move them to the front.
(Yes, Compactor is now without a tail, but has side protection.)

J · « **Reply #387 on:** January 09, 2011, 02:36:06 PM »

I'm thinking I should make my next team fire-based. Mostly because it seems like a "neat-o" idea:

Because robots like this are the new fad

Reactor can easily get under wheels and junk:

Oh, and he can hit anywhere from 600 to 1,000+. Its wonderful.
(despite the fact it only has 6 razors)

Badnik96 · « **Reply #388 on:** January 09, 2011, 03:02:18 PM »

yay a cheese clone!

J · « **Reply #389 on:** January 09, 2011, 03:06:02 PM »

Quote from: Badnik96 on January 09, 2011, 03:02:18 PM

yay a cheese clone!

Not really a direct clone, but I did get the idea off of what you guise made.

Pwnator · « **Reply #390 on:** January 09, 2011, 08:01:23 PM »

For some reason the side ramplate setup won me over. XD

J · « **Reply #391 on:** January 09, 2011, 09:05:54 PM »

Quote from: Pwnator on January 09, 2011, 08:01:23 PM

For some reason the side ramplate setup won me over. XD

It works, yo.

J · « **Reply #392 on:** January 14, 2011, 10:50:06 AM »

So I felt like "trying" to make something again(At the moment, I'm kinda' out of ideas), mostly to add to my newest team.
Lightweight get:

WHATS THIS!? J PUT EFFORT INTO A SPLASH!? HOW IS SUCH A THING POSSIBLE!?!?
*Cough* anyway...
I'm not going to lie to you, but I got the idea off something Bob made:

More or less, I was all: "Why are the tribars up? And he could easily fit another battery in it" -> Few minutes later -> This post appears.
Ehhh.... just go with it.

Naryar · « **Reply #393 on:** January 14, 2011, 10:52:57 AM »

WHY PINKS WHEN YOU KNOW THEY ARE BAD

J · « **Reply #394 on:** January 14, 2011, 10:55:16 AM »

Quote from: Naryar on January 14, 2011, 10:52:57 AM

WHY PINKS WHEN YOU KNOW THEY ARE BAD

Yea.. I'm going to switch to one of those reds.
Mostly because at first I tried putting 1 in, and the chassis did that whole: "LOL ITS TOO SMALL EVEN THOUGH IT CLEARLY FITS" gimmick.
I know I have room for that and a control board, just, I was being lazy.
*Goes off to re-build it*

J · « **Reply #395 on:** January 14, 2011, 11:19:41 AM »

Slight update, Fireball now has a better power supply:

Now if I REALLY wanted to, I would swap the 2nd Z-Tek for a single HP one and give it irons. But ima leave it as is, as the 2 Z-Teks give it a wider range.

Naryar · « **Reply #396 on:** January 14, 2011, 05:55:06 PM »

so much empty space

Sparkey98 · « **Reply #397 on:** January 14, 2011, 05:56:32 PM »

Do you mean everything is symmetrical?

J · « **Reply #398 on:** January 14, 2011, 10:03:43 PM »

Quote from: Naryar on January 14, 2011, 05:55:06 PM

so much empty space

I cant stack to save my life. And even if I did shrink the chassis, which I can, I have no idea what to do with that weight.

Quote from: Sypher878 on January 14, 2011, 05:56:32 PM

Do you mean everything is symmetrical?

MUST.... RESIST.... CHEESY.... COMEBACK......
*cough*
By "Everything is the same", I mean same as the last design.

EDIT: If I rebuild it right, I could upgrade to HP O,o

J · « **Reply #399 on:** January 14, 2011, 11:37:35 PM »

I felt like fixing up Fireball 1 last time:

I tried using irons on regular Z-Teks, but even then I dont have enough weight.
So I'm staying with razors on HPs. The only way this could possibly get smaller(which I dont know how it would) is if I could stack the control board into the battery. But to be honest, I really don't have the patients for that.

I declare Fireball to be finished.