Author Topic: Gaz's Garage (Read 99325 times)

Gazea2 · « **Reply #180 on:** April 25, 2010, 09:25:05 AM »

I did it!

Here is the bot that I made using the TCG.

Rate and comment, as usual!

Sage · « **Reply #181 on:** April 25, 2010, 11:03:02 AM »

Yay, you got it!

Nice bot. The grannies are probably making the wedge worse, and with the extra weight from switching to shinies you can maybe protect the wedges or add more frontal armor.

Also, rotate the razors sideways so they all hit at once.

Badnik96 · « **Reply #182 on:** April 25, 2010, 11:12:18 AM »

You are quickly becoming a top Stock builder.

JoeBlo · « **Reply #183 on:** April 25, 2010, 11:16:56 AM »

I would switch to shinies

possibly change extender work a bit so razors hit at the same time and that you can have more (maybe loose the axes) just becasue 6 isnt really enough for HW

Gazea2 · « **Reply #184 on:** April 25, 2010, 01:41:01 PM »

Quote from: Sage on April 25, 2010, 11:03:02 AM

Yay, you got it!

Nice bot. The grannies are probably making the wedge worse, and with the extra weight from switching to shinies you can maybe protect the wedges or add more frontal armor.

Also, rotate the razors sideways so they all hit at once.

I'll do that tomorrow. :)

Quote from: Badnik96 on April 25, 2010, 11:12:18 AM

You are quickly becoming a top Stock builder.

Thanks! :D

Quote from: JoeBlo on April 25, 2010, 11:16:56 AM

I would switch to shinies

possibly change extender work a bit so razors hit at the same time and that you can have more (maybe loose the axes) just becasue 6 isnt really enough for HW

I can't add more razors because of the rule of 7. :/

JoeBlo · « **Reply #185 on:** April 25, 2010, 11:31:46 PM »

rotate the 80cm ? long one off the DDT 90 degrees

ditch the 40 cm one coming off it

then attach 20 cm ones off it

I can give you an example if need be.. but it should get 5-6 razors on each

Somebody · « **Reply #186 on:** April 26, 2010, 11:19:25 AM »

How do you make the Trovaner Chassis glitch work and actually appear in the bot lab?

Squirrel_Monkey · « **Reply #187 on:** April 26, 2010, 11:21:54 AM »

Make sure no lines touch or cross, just make the thin bit as thin as possible.

Sage · « **Reply #188 on:** April 26, 2010, 03:04:23 PM »

Somebody, I have a video tutorial :D

But quickly, the rules. No line crossing, no lines on top of each other, no extreme angles (close to 2:1 ratio)

Gazea2 · « **Reply #189 on:** April 27, 2010, 02:07:07 PM »

Here is my updated bot:

Rate and comment!

Reier · « **Reply #190 on:** April 27, 2010, 02:08:26 PM »

Make the back Zteks flush with the floor. Like the flat part down, not the pointy part down.

Gazea2 · « **Reply #191 on:** April 27, 2010, 02:14:19 PM »

Quote from: Reier on April 27, 2010, 02:08:26 PM

Make the back Zteks flush with the floor. Like the flat part down, not the pointy part down.

It wouldn't let be do that before but I'll sort it out after. Anything else?

Reier · « **Reply #192 on:** April 27, 2010, 02:21:14 PM »

Oh, just tighten it up, stuff like that.

Sage · « **Reply #193 on:** April 27, 2010, 03:03:12 PM »

It's just a little messy, that's all. Plus hammers should really be able to take down HS. See how it fares against some of the Starcore HS.

kill343gs · « **Reply #194 on:** April 27, 2010, 05:20:42 PM »

A V shaped plow setup would help with trapping HS's. I would put the Zteks back the way they were before and narrow the side plows, bit, it looks sloppy that way.

Gazea2 · « **Reply #195 on:** April 30, 2010, 12:13:18 PM »

I decided to take a break from my last bot and built this:

(I know it is kinda like Pwnators bot :P)

Rate and comment!

Squirrel_Monkey · « **Reply #196 on:** April 30, 2010, 12:22:54 PM »

Some casters aren't sticking out so offer no protection.

Gazea2 · « **Reply #197 on:** April 30, 2010, 01:49:14 PM »

Anything else?

Naryar · « **Reply #198 on:** April 30, 2010, 06:46:58 PM »

Triple wedge is unneeded... these mover blades aren't protecting much as well.

Gazea2 · « **Reply #199 on:** May 02, 2010, 10:18:26 AM »

Here is my updated Blitz:

It gets under NWB every time.

And here is the ultimate Tag Team for Robonova 2:

(I think I may have disgraced Joe with my splash skills :P)

Rate and comment as usual!