CameraFan's Showcase

[090901]

Okay.... so first off, you need to get 6wd HPzs and a black.

You don't need 6wd
And even if you used 6wd you would want to use a black + nifty.

[CameraFan]

Made this one yesterday but never got round to posting.

[NFX]

You could easily replace the Nifty with a second black. Or lose the Nifty altogether, remove the 20cms between the BA and T Connectors, shrink up the chassis by .1kg, then you've got enough weight to get irons on the side of all three ramming racks.

[Gauche Suede]

anyways, you should put the nifty in between the HPz, and put the pistons and the air tanks like this: 1st air tank ---> pistons ---> 2nd air tank.

Can't fit them in because i still fail at stacking, with or without movepixel.

And, if you can piston effe, you can try putting a snowplow to hide the extenders better.

I can effe, but I don't understand how this could get a snowplow on (probably cause I had an extra dose of noobishness and started messing around with total fail bots today).


EDIT due to not double posting

Just wanted to share a generic rammer I've been working on.

Fire Hawk.




Runs out of power quickly and gets weighed down by its 36 iron spikes 

Put the snowplow with a baseplate anchor, the Effe part is to get the plows out of the way.

[CameraFan]

I LOVE RAMMERS

Enter Bot Name LW


Mauls V3 Tempus Fugit given a good early hit.

Enter Bot Name MW


What's a good bot to test this against? All I know is that it smashes Fury OK.

Yeah, I got close to the weight caps without even trying. I have a fs somewhere but I cba to find it today.

[qwertythe300th]

Made a showcase to get criticism and hopefully improve

Sir Spikalot, my first decent bot:

DSA armour. Turns most things I throw at it apart from flippers into mince w/o the Starcore AI.
Of course, any feedback is appreciated.

I would agree with adding blacks. But i dont know much about rammers as im more of a spinner builder. it looks real good though. You already have some respect from the vets. Good work and welcome to the forum! 

[Gauche Suede]

I LOVE RAMMERS

Enter Bot Name LW


Mauls V3 Tempus Fugit given a good early hit.

Enter Bot Name MW


What's a good bot to test this against? All I know is that it smashes Fury OK.

Yeah, I got close to the weight caps without even trying. I have a fs somewhere but I cba to find it today.

On the LW: You can easily shrink the chassis for MOAR RAZORS.
On the MW: you can use a nifty for 100 more power and 8 kgs, if you stack the control board to the nifty and shrink the chassis, you can get MOAR AXES, and you can just use 2 baseplate anchors to place the weapon racks.

btw, get starcore V4.
(you can try making a popup next).

[CameraFan]

I'm back and more RED than ever! 

Name? RED of course.

Now who was it that hated red...?
edit: Sawwy Sage.

[090901]

That is too many weapons for a snapper, remove some then add a wedge.

[Badnik96]

Get rid of those ice picks, they're pointless.

[Classicus]

Ice picks are pointy.

[cephalopod]

Ice picks are pointy.

<3


But yes, Ice Picks are pretty bad in this case.

[HurricaneAndrew]

Definitely shrink the chassis, get rid of the pick axes, get a wedge on it, and  get a ramplate on the front of the chassis for armor.

Look at me giving stock advice...

[090901]

Definitely shrink the chassis, get rid of the pick axes, get a wedge on it, and  get a ramplate on the front of the chassis for armor.

Look at me giving stock advice...

I doubt you would have weight for a ramplate

[Mr. AS]

Definitely shrink the chassis, get rid of the pick axes, get a wedge on it, and  get a ramplate on the front of the chassis for armor.

Look at me giving stock advice...

I doubt you would have weight for a ramplate

he might be able to get a ramplate if he doesnt have a snapper2 wedge

you probably need a wider front aswell if you dont want to be spinner bait

[Gauche Suede]

I'm back and worse and more RED than ever! 

Name? RED of course.

Now who was it that hated red...?
edit: Sawwy Sage.

Downgrade to normal Z-teks (HPz are OVERKILL for LW popups), reduce the number of razors to 3,get a snapper II(blue one)/ snapper 2(green one) wedge, and get a Supervolt.
And as Mr.AS said make the front wider so that spinners don't knock you to your side and take of your wheels.

btw, your bot looks pretty much the same as this but less wide:

[CameraFan]

Yep it looks just like Jolt. And as RED II doesn't sound right, I had to change the colour :l

I also like gummy bears.

[Mr. AS]

POPUP- looks alright. chassis is a bit high. just raise the height slider 5 clicks from the bottom to get minimum height for the drive (if you can put a ztek in the chassis but not a snapper2 [the green one] vertically, youve achieved minimum height)
HS- 2 pinks is simply not enough for 3 motors. a nifty should do for that, see: http://beetlebros.gametechmods.com/ra2stats.htm. good that youre learning how to effe however. also, just mount the rads on thier side instead of vertical like that, and try to get a hpz in there

[Gauche Suede]

Yep it looks just like Jolt. And as RED II doesn't sound right, I had to change the colour :l

I also like gummy bears.

BLACK-Get a Supervolt for maximum power, and then get movepixel so that you can organize your chassis better( And what you wanna do is to switch the location of the snapper II wedge and the Snapper 2 weapon motor, so that the weapon's extenders don't stick out.)
Gummy Bear- Klone this first: