This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Messages - TheOrcCorp
Pages: 1 ... 32 33 34 35 36 37 38 [39] 40 41 42
762
« on: August 02, 2017, 05:28:55 AM »
Right...let's look at these bots. 1. It's a door! Not much else to say really, just a mess (sorry). 2. Simple design but effective from what I can tell! Splash could use a bit more oomph though. 3. Not too bad, the toast part is a very neat touch! Splash works quite well, simple but effective! 4. It's a microwave! I like how all the vital components are inside the microwave itself! 5. This is awesome, the disc skin (it is a skin right? I can't skin at all) is great! The splash is okay. 6. It's a table, WOOD you believe it? It's not very good all around though (sorry). 7. Not bad, interesting shape and I like the LED effects added. Splash could have been done a lot better. 8. Not too appealing to look at it and no, not just because it is based on poop. The weaponised part looks decent though. Splash is meh (sorry). Also would just like to add: no, I didn't make 3 or 4. :P
763
« on: August 01, 2017, 09:14:27 AM »
Well, the fights so far have been pretty good! Hornhead lost like I thought but in spectacular fashion! Not sure why people had a problem with Flaze but in any case: good luck Badnik! I'll be facing Primeval's Minmi which should be a fun little fight.
Nuclear Winter Junior vs Icklemandra was a great fight, both robots looked amazing and did well! Can't wait to see them both in action again! Also, I was surprised Zomp won but in a good way! I thought Black Morgen would trash it but Zomp was fairly resilient (apart from losing it's flipper) and controlled the fight fairly well.
SO MUCH HYPE FOR THE REST OF THE TOURNEY!
764
« on: July 30, 2017, 01:09:49 PM »
I like 3volution, sure it may be a bit wide but for your third extenderbot, not bad at all! I also don't see why people are so against angle extenders, I didn't notice them until people pointed them out: they can work if used correctly which I feel they were here. In any case, can we see a Salamandra 4ever that is a bit narrower?
765
« on: July 29, 2017, 07:05:41 PM »
I wanted to make a Killertron/Terrorhurtz/Beta type weapon but with a spinning weapon instead! (Image removed from quote.)
Since we're both originally from BW, you mean one similar to Jelson's, amirite?
I have no idea what you're talking about. :P
766
« on: July 29, 2017, 06:24:09 PM »
holy sh**
that's cool
duality looks kinda weird tho
Thanks, I can see why Duality is weird...will have to redo it sometime! In the meantime, here is the first of a series of construction/scrapheap themed robots: presenting Tearaway! I wanted to make a Killertron/Terrorhurtz/Beta type weapon but with a spinning weapon instead!
767
« on: July 26, 2017, 05:22:01 AM »
I really love it dude, colours stand out and the design is pretty cool! I especially like the tail...teach me your ways!
768
« on: July 21, 2017, 03:34:23 PM »
769
« on: July 21, 2017, 04:33:32 AM »
why are the newbies already so good at dsl smh
All the old guard had to relearn DSL and convert their mindset from DSL-S to IRL. Newbies and people that didn't build much DSL-S in 2.1 came in with a fresh mind and so take to the very different building style more easily. It's why you don't really see the best 2.1 or stock builders making god-tier IRL bots, I think.
not a bad explanation actually didnt think of that
Took me a fair while to get used to DSL though honestly, I had no idea that DSL 2.1 was as different as what it sounds. I'm glad you think I'm good at this building stuff though.
770
« on: July 20, 2017, 07:40:16 PM »
God damn they look good dude
This is such a cool concept and the bots looks super cool too. I particularly like Labrat,Nibbler, Rattrap and Cheesnout. I wonder if any tournament hosts would let you enter all 6 and then pick and choose which pairings you want to fight with. Almost like a swiss army bot but not.
Also love that you matched the battery colours to the exteriors. The level of attention to detail is real.
Thanks guys, it'd be awesome if a tournament host let me use them like that! Gotta love the new IRL component pack DSC released, thought it'd be cool to match the batteries as close as possible!
771
« on: July 20, 2017, 05:11:52 PM »
So I've been working on this project for the last few days...I present to you all "The Rat Race"! The inspiration behind this ragtag group of rodents came from Creepy Crawlies from Battlebots, the rat robots from Robotica and robots I've seen on here with different configurations! I had the random idea of "Would it possible to make a group of bots that all share the same base body but have different weapons/personalities etc." All of these bots share the same base chassis, wheels and wheel motors and armour plating and tails. Everything else is different depending on the robot. They could either compete individually as Cruiserweights or pair together as a SuperHeavyweight entry. Here is their insides too. Hope you all like them!
772
« on: July 20, 2017, 10:46:38 AM »
Jesus christ, this is amazing! You can tell that you spent a lot of time working on this! Good first bot in the showcase, can't wait to see more from you!
773
« on: July 19, 2017, 05:32:41 AM »
Okay so.... AW - Hornhead has no chance here, Flaze IV looks deadly and will more than likely rip my bot apart! BW - So I'll either be facing Wheel of Doom or BWIP...not sure about these two bots, maybe Bruiser stands a small chance? Beyond that though, Bruiser is gonna be the one with bruises...and more most likely! LW - Grunt vs Crimson Pecker. Axe vs Axe. Crimson Pecker is definitely better designed and I can see it advancing...we'll have to see what happens though! MW - Roboteer reckons Crumplezone has this in the bag against Curly Wurly. I think it won't be that easy, even if Crumplezone has a fair bit of power (from what I remember). Beyond that, Lazar or Tiny Trident should be really interesting match ups! CW - General Orcatraz might be in for a rough time here, Evil Art Project EVO looks quite cool/powerful. Don't fancy my chances here! HW - This should be an interesting one! Similar weapon designs (not counting Crocognaws' tail) and should be a fun fight! I reckon Shark Byte has the advantage though! Winner faces Magnhild which should be a good fight regardless of who fights it. SHW - Monstargh vs Critical Emergency should be a good fight. All depends on how powerful CE's flippers are and how good Monstargh aims! Beyond that, Chanticleer 2/Drone and Gaff Hex 2.1 look great and whoever wins should get a good battle with them.
Good luck everyone!
774
« on: July 19, 2017, 05:03:46 AM »
Nicely done!
Here's Stock Cassius Chrome. Got this bastard done in roughly an hour or two. (Image removed from quote.)
You can find him on the BotExchange in the UHW class.
Goodness grief, that is fantastic!
775
« on: July 18, 2017, 10:44:14 AM »
With all the time you spend bitching about people posting multiple robots, you could actually give feedback on them instead. Just a thought.
I had to go off and it was 1am. I needed sleep so I finished the post off and went to bed. I'll review en in a bit.
Also, well done to Hoppin for editing in detailed advice. That's what showcases are for.
Saturnalia: Good but generic. Give it some accenting with wedge edges, spikes, extenders, extras. You have a lot of colours to choose from, try and use them all. Also, it needs a less generic skin. Also, this robot is unrealistic as ****. Look at how the npc goes through the burst. How the hell is a piston meant to get through there?
Magnhild: Build to the weightlimit. That's just under 125kg wasted. Your chassis is too small. That's a ****ing puny burst. I'd be surprised if your robot didn't fly through the air everytime you fired the burst. Slimbodies on a HW? No. Use the weight limit and get some NPC'sin there. Stick an armour plate on or 2 to add to the look. Decorate. The skin looks messy with some being plain white and others being metal. Build up a look for the skin.
Stormflower: Unrealistic as ****: the bar and teeth go through the perm and I think actually hit the drive motors and wheels in places. The Sir K claws do not fit the bar: use something else. Put the perm in theback and extend the belt out to the front. Use Left and Right NPC's because they are flatter. Too many batteries for sure: The batteries shuld tell you how many motors they can power, and for how long they power it for.
Crocea Mors: Looks good. Slimbodies clip with the battlepacks though, and that is not good. Get into the habit of Building realistic constantly. Using an excuse of "it won't appear in tournaments" is just a way of refusing to improve.
Ruby Rose: Can't really see the internals well. Try and fit the skin to the extender colour. You probably need a wedge on there. Slimbodies for drive? NO.
Black Sun: Unrealistic. Don't use Ant batteries. Longer belt on the motor. Underweight.
Yoton: Generic. Needs a better skin. Underweight: this is underweight even for Cruiserweight standards. Unrealistic AGAIN.
Rum/Flipper Arma/Garudimimus/Einiosaurus: Looks decent. No advice available becaus eyou haven't provided internals, outside of a request for a better skin.
Still no excuse to moan about it. If multiple bots annoy you then just bypass it: you're the only guy with an issue about it. In any case, it's nice to see that you actually took the time to give Primeval feedback which is all he wanted in the first place...even if you are a bit harsh at times. Anyway, nice to see your DSL bots on here Primeval. I'm gonna start by saying you have a great imagination which is always a good start. I can see your robots really improving if you take on the advice people give you here, who knows what heights you'll reach?! Saturnalia - The robot looks great on the outside but the motors clipping the burst isn't good. I've always liked the design of this bot though! Magnhild - I like the body shape but could it perhaps be a bit bigger? Means you could fit in better suiting motors which are more appropriate for the weightclass! Does the robot go unsteady when it fires, the third picture seems to suggest this so maybe add some weights in the front and back of the hammer? Might help with the weight issue too! Skin wise, I like it but I feel the metal parts are outlandish...perhaps replace these with some regular grey paint? Stormflower - It looks alright but the spinning blade goes through the motor. The wheels also go through the body at a weird angle. Perhaps rebuilt the bot to have more of a UK Fluffy-like body? The Killalot claws kinda suit the bar but don't at the same time. Did you experiment with other weapons on there? Crocea Mors - Love the design of this bot, definitely my favourite visually! Again, the motors/batteries clipping isn't very good so if you could change that, it'd be awesome! Ruby Rose - It looks decent but like Ava said, it's a bit hard to see the insides. Can't really say anymore, sorry! Black Sun - Definitely more than enough batteries in there, you don't need that many! Robot looks pretty cool though although it looks like again, the blade will clip through parts of the robot like batteries. Yoton - Simple but cool looking, I can't tell how clumped together the insides are so if they are clipping etc make sure to change that! I can only give visual advice/comments on the last four bots, make sure to provide internal shots if possible! Rum - Looks quite cool, I like the spinning drum! FlipperArma - That sure is a big flipper! Bot looks cool but the wheels clipping through the top at a weird angle kinda bring it down a little bit for me. Garudimimus - Simple robot that reminds me of Robochicken, could do with a better skin if possible though! Einiosaurus - It looks pretty cool, I especially like the flipper design. Wheels slightly poking out the side but this is easily fixable I'm sure! Keep it up man, I look forward to seeing your improvements/future robots!
776
« on: July 18, 2017, 06:16:17 AM »
Thanks for the kind words guys bruh how could you not have a flamethrower for this
I didn't have that in mind when building it, I may make it switchable or something. this is kickass
i have one complaint though. it looks very... square and boxy for a dragon, and not "organic" enough.
Complaint noted: it would have looked a tad better if it didn't have those big boxes on it's shoulders but the batteries and stuff needed to go somewhere! I feel I tend to make better "organic" looking robots that don't rely heavily on extenders/armour panels (Cobra and to a degree, Crocognaws) so perhaps I'll have to make a non-extenderbot version soon.
777
« on: July 16, 2017, 03:52:58 PM »
Awesome work, but when I click on the new Battlepacks, my game crashes. All the other additions seem to be working fine.
Can confirm same here.
Can confirm this has happened to me too. It just crashes the game. Aside from that, everything looks amazing!
778
« on: July 14, 2017, 03:32:51 PM »
Another robot I have churned out...here's Drago-Saurus! End result came out differently than I planned but I like how it turned out!
779
« on: July 14, 2017, 02:17:22 PM »
Lovely creativity, all of them worthy of BOTM.
Good job.
Very kind of you, thank you!
780
« on: July 14, 2017, 10:12:56 AM »
IMO Carrion's eyes aren't emphasized enough (4 colors within a small space doesn't help).
Werewolf is easily BOTM material.
Carrion's eyes were the last thing I added in to be honest, I wasn't even sure I'd be able to add something there! I'll give them a look over! BOTM Material? Wow, that is one of a compliment, thank you!
Pages: 1 ... 32 33 34 35 36 37 38 [39] 40 41 42
|