This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Messages - Pwnator
6381
« on: August 15, 2009, 10:18:59 PM »
Gah. Mine's a speedy rammer. D:
If mine was able to knock BOT-206's saw in 2 hits, I hope I get this one in a single ram. D:
6382
« on: August 15, 2009, 01:19:45 PM »
Orange batts are good. :P
But yeah, you're right on the wheels. Use Technos or Vlads/Tornadoes if the former are overkill for you.
I forgot how many amps the orange batts produce, but just do the math. The amps the batts produce should be equal to/ just a little more than the amps the motors use. It kinda looks overpowered to me, just use the extra weight on more razors on mag snappers (or swap them to JXs) instead.
6383
« on: August 15, 2009, 12:14:28 PM »
ACAMS in a DSL tourney :O
6384
« on: August 15, 2009, 10:39:41 AM »
I'll do a part of the BBEANS 5 bots. But I'm just gonna do the ones on the table, the previous bots of the builder and the standings (when they're updated). I'll just let the eloquent commentators do their job on the trivia and the summaries. :D
I can't start on them immediately after BBEANS 5 is done, though. My teacher's forcing me to complete my project for the Intel competition. :/
6385
« on: August 15, 2009, 10:38:22 AM »
I'll do a part of the BBEANS 5 bots. But I'm just gonna do the ones on the table, the previous bots of the builder and the standings (when they're updated). I'll just let the eloquent commentators do their job on the trivia and the summaries. :D
6386
« on: August 15, 2009, 01:44:52 AM »
2 pinks for 4 HPZs?!?!! :O
Try attaching the piston via the snapper so you can shrink the chassis. :D
6387
« on: August 15, 2009, 12:48:55 AM »
Much better. :D
Get SCv4. :P
6388
« on: August 15, 2009, 12:08:07 AM »
Ah. That's the tricky part. Your hidden AP should be in its final position. Just reattach the snapper and rotate it correctly. :D
6389
« on: August 14, 2009, 11:21:43 PM »
Do all of those without being generic. 
6390
« on: August 14, 2009, 11:05:05 PM »
DK's right. Also, you can just make the chassis 3 pixels tall and just stack the CB inside the black. And make the razors touch the opponent at the same time.
To make that, have the secret attachment points of the snapper face to the middle. Attach extenders using the side AP and make them face either the front or the back, your choice. Do some quick axle loading and attach the drive and the motors on the opposite ends of the extender. Do the same for the other one.
And it would really look better if the black was centered, but it's still your choice. :D
6391
« on: August 14, 2009, 10:30:03 PM »
6392
« on: August 14, 2009, 09:37:10 PM »
@ Reier - Nope. For some reason it didn't even flash red when it was at its peak. So I took advantage of it. Probably because I made my chassis as low as possible (3 pixels if I could remember).
@40757 - You mean the anglers on the free axles? That was the only setup I thought of to make the axes the same position as the ones on the snappers.
Still couldn't stack the batt for the clamp bot. >.<
6393
« on: August 14, 2009, 12:30:53 PM »
Define 'good'. How long does it take to full spin up? :P
Put the motor inside the chassis instead so you can get rid of the oh-so-brittle flipper segments.
6394
« on: August 14, 2009, 11:30:27 AM »
Thanks. :D
And the axes on the snapper are already crisscrossed. Now I've just thought of a way to make the axes on the axles symmetrical. >.<
I tried to swap the positions of the blacks and the snappers, but for some reason the extenders get ripped to early (even Tidal Wave did it x_x).
Oh well, it'll have to do (the axes don't scrape the ground anyway and I'm too lazy to fix it). Expect a clamp bot soon.
6395
« on: August 14, 2009, 11:24:08 AM »
Yay DP (again) After seeing how awesome Silver Bullet 2 and WarMachine are, I decided to make my own uber-stacked rammer. So here's Crankshaft:  26 (or 24?) axes and 2 razors, I think. 16 of them are attached through the 2 snappers. The other 10 (or 8?) and the razors are attached via 2 free axles. The last pic was just a little experiment. Since SC showed his vid of WM 1HKO-ing Anti-Epic, I figured I want to try my own. Took some time to aim well, though. XD
6396
« on: August 14, 2009, 07:17:54 AM »
Turn the attachment of the razors 90 degrees so all of them hit the bot. And if you could shrink the chassis a little more, you could have more protection or razors.
6397
« on: August 14, 2009, 07:11:14 AM »
I'd say Second Sentinel can be a bit hard, but usually my metal hinges can get under Critical Emergency with ease.
And if Grim Chopper's hard, then Tip of the Iceberg should be a bit harder. :P
Oh, and Red Alarm's quite good, actually. Probably because you have a bot type that has an advantage over pokers. XD
6398
« on: August 14, 2009, 05:48:54 AM »
Well, it's not that shocking at all. Sweet Poppin' Corns had more hardcore AAMs. :P
6399
« on: August 14, 2009, 04:57:40 AM »
VERY much better. If the game allows you to shrink the front sides a bit, you should. A HS can hit those parts where the ramplates don't protect.
Also, maybe wider wedges would help. Not that it would increase its wedginess, but wider wedges would give it an advantage. :D
6400
« on: August 14, 2009, 04:35:26 AM »
Lego Spin Doctors = EPIC WIN.
<3 the casters. XD
|
Show Posts
