This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Messages - Pwnator
5401
« on: January 23, 2010, 09:17:30 PM »
Kewl.
Now if you can get it invertible it'd be UBER. :P
So far, I've only been able to do it using a Snapper. If G.K. makes a static invertible setup, now yeah, that would be UBER. XD
5402
« on: January 23, 2010, 09:14:57 PM »
I can't see it well, but is it 4WD?
Since all pistons weigh the same thing, you could probably use the longest piston (2nd longest if it Havoks) so it can pack a bigger punch instead of pushing around.
5403
« on: January 23, 2010, 11:37:18 AM »
Hmmm... 11kg to spare. How about a Lightning spike on a multi-extender on the center?
5404
« on: January 23, 2010, 10:54:46 AM »
The irons passed through the ceiling. Since the extender holding the weapons didn't suffer enough damage from the Havok, the bot stayed there and was counted out.
5405
« on: January 23, 2010, 10:53:47 AM »
He was here yesterday.
5406
« on: January 23, 2010, 10:16:20 AM »
That the final setup is slightly underweight.
You can always spend the weight on making a shallower chassis wedge.
5407
« on: January 23, 2010, 07:07:28 AM »
BBEANS 3 wasn't held on GTM, and VP didn't have a wiki page, so most of us know RRG better than VP. But still, it's nice to see you back. *dragyoursisterinaswell*
5408
« on: January 23, 2010, 05:50:28 AM »
It's DSL LW.
And I'll send my team soon.
5409
« on: January 23, 2010, 05:36:41 AM »
BFR has a snapper wedge and 6 razors on 3 Snapper2s. But the bot's body is almost a perfect fit for the PYS popup setup.
5410
« on: January 23, 2010, 05:25:06 AM »
2 blacks, 2 HPZs with rubbers, DDT wedge, 8 razors on 2 DDTs, DSA on a MW, like this:  And countless others as well. :D
5411
« on: January 23, 2010, 02:56:43 AM »
Well, the HS did show that you've improved slightly. Clone the rammer in the BB guide and that will help you a lot.
5412
« on: January 22, 2010, 06:31:00 PM »
I'm still leading? Kewl.
5413
« on: January 22, 2010, 06:20:35 PM »
Next, shrink your chassis and stuff some more weapons in it. R1 said that the previous one was better, and he's right. In this case, maces pwn razors. But you can put more of them when you use an extender or two.
5414
« on: January 22, 2010, 06:07:02 PM »
That was a chassis I planned to use for a 28 clone, but I don't wanna build that for the meantime. Then I did some mental calculation and thought that this setup would work as well. Oh well, you guys'll see my boring 36-HS soon, as well as something creative-ish. :D
5415
« on: January 22, 2010, 05:54:55 PM »
Shrink the chassis until the wheels stick out, place the CB on top of the black, change the servos to the low-powered ones, and put them closer together so you can have a smaller chassis.
5416
« on: January 22, 2010, 08:37:38 AM »
Finally a creative HW HS...
It would be even more awesome if you could build it in DSL.
You'll pretty much end up with a wedgeless, souped-up Century Storm. :P
5417
« on: January 22, 2010, 08:19:33 AM »
oh, I forgot
you can haz cokei
I wish I new how to jam popup stuff into a small chassi, all my popus are huge 
A cookie with hints of cocaine in it? Odd, but thanks. :P And you can have chassis less than half of yours if you know how to utilize the advanced building techniques. Mine uses quite a lot of snapper loading. As you can see, 2 HPZs and 2 DDTs are attached to a single Snapper II using only 2 20cm extenders. You can even slice a bigger block off of your chassis if you can stack batteries (not really a skill, just takes a lot of patience). Speaking of patience, this bot was in the Robot Designs folder for 4 months until yesterday, when I was finally able to stack the CB inside the 2 stacked blacks. So here's my non-generic HS, Tunnel Vision 2:  2 blacks, 16 irons + 16 maces, 2 casters and you can see the rest. I was inspired by R0B0's 28 since his unique weapon motor setup makes it seem like there are 2 tribars connected to a single motor. I played around with the snapper placement, and came up with the perfect arrangement. But then, I was only able to stack a CB + black or a double black. Then I was snooping around in II AI's bots, then I took a closer look at Surge 2. I've always liked its design since it's impossible to tell which side is up from the outside, so I wanted to try a HW version of it. And it works quite well. One thing this has over other typical HW HSes is its size advantage. When popups slide under HSes, the wide reach of the HS gives the popup a large area of attack. But when it hits a shallow wedge, the next thing it will probably do it flip like a coin, damaging the top in the process. And this little bugger can occasionally go under bots from time to time. >:)
5418
« on: January 22, 2010, 05:01:44 AM »
Either one works, but having the realistic rule enforced can slightly limit designs, but it's much more fun. :D
5419
« on: January 22, 2010, 04:58:15 AM »
Should the bots be realistic, like the old ones?
5420
« on: January 22, 2010, 03:49:08 AM »
The small fenders kinda threw me off, but good job overall. :D
|
Show Posts