This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Messages - Pwnator
5381
« on: January 28, 2010, 02:45:42 AM »
EPIC.
Btw, how did you do the shock absorbers? :D
5382
« on: January 27, 2010, 07:46:30 AM »
Not really. The original one already has a tendency to steer away from the center anyway. This one's also wonky, but only to a lesser degree.
[Edit] Crap. OHKO from Seppuku 3. I REALLY need to work on my driving.
5383
« on: January 27, 2010, 02:56:24 AM »
Yeah. SC did state that in order to get the clone right, the chassis needs to be exactly 27.9kgs. So most of the weight saved was by shrinking the Snapper II section and its chassis height. Took me 30+ tries, but it was worth it. XD The original post is here: https://gametechmods.com/forums/index.php/topic,2315.msg80898.html#msg80898:D
5384
« on: January 27, 2010, 02:50:32 AM »
The SnS needs a longer reach. Remove 2 flamers, attach the other set on flails, then use the weight to extend the DSL bar and use the other attachment point of the sledges. :D
5385
« on: January 26, 2010, 06:25:45 AM »
A good HS needs to have symmetrical weapons. Yours can pull off a Mauler. :P
5386
« on: January 26, 2010, 05:29:59 AM »
lollolomgwtfbbq DP! FINALLY! After 2 months, I finally got the chassis for the new Fury:  And damn, does it pwn. :D
5387
« on: January 26, 2010, 05:24:29 AM »
 Yeah, Jigsaw still needs some tweaking. It just couldn't clamp HSes well. And the VS is too wobbly. D:
5388
« on: January 26, 2010, 03:15:04 AM »
The rear still looks kinda odd to me, but the front sure looks intimidating. Good job! Try using a rectangular chassis instead of a 'T' chassis so you can mount all motors inside, and try to give them Hypnos (not necessary, but preferred) as well. :D
5389
« on: January 26, 2010, 03:11:49 AM »
Also, you can use a medium ME instead of 2 extra extenders for the plow. Same weight with infinitely more HP. The beater bars should also be fixed so that the lower bars can also deal damage. And you could probably attach the flamers onto a skirt hinge instead of using DSL bars and such. But overall, it's quite nice. :D
5390
« on: January 26, 2010, 03:08:09 AM »
Awesome popup is awesome!
Crap. Too many bots to clone. D:
5391
« on: January 26, 2010, 03:05:06 AM »
Uh-oh. I spot a problem. The sides aren't protected enough (and that's where most HSes hit first). use a Snapper II to attach the plates and you can get some weight for more casters for the side, or just fix your ramplate attachment so that the outermost plates can cover the edges.
5392
« on: January 26, 2010, 03:01:42 AM »
To get away from the attack of the rule of 7, mount the weapon motors first instead of the drive. Also, you don't need such heavy extender work. Put the center anchor at the front and just attach the angler directly to the anchor. And it's better to have the drive shifted to the back, and have the weapon motors slightly lowered.
5393
« on: January 25, 2010, 04:43:26 AM »
Downgrade the rear stabilizers to polycarbonate and add a metal hinge wedge in the front. Try to be weight-conservative on the side stabilizers as well so you can upgrade the drive.
5394
« on: January 25, 2010, 03:33:10 AM »
No they don't.
But what's that thing on the bottom left pic at the center of the bot's hood? Ants?
5395
« on: January 25, 2010, 03:31:08 AM »
And I thought Nary's Team Fagg3t hurts my eyes. XD
UBER. :D
5396
« on: January 25, 2010, 03:27:18 AM »
oooo I actually like that HS. Is it completely invertible? Cause I've had bots like that where it can move, but not very well.
The juggler is very nicely done, but yea, wedges are a problem on jugglers because all the weight is in the back. I find maces to be a little less effective on jugglers because they have more concussion than piercing. Maybe try razors on top and irons on the edges?
It tends to slides around at first, but it gains some grip when the weapon motors fully spin. So yeah, it's not fully invertible, but it moves decently for a HS.
I almost cried BFE until I figured out the setup on the HS. Also, I find that more baseplate components = better wedges, so complex bots will always have a tough time with wedginess. Very well done though.
Hehehe. The Snapper II position probably gave that away. XD
As for the wedginess, Wipeout has great wedges (and those are blue wedges), and the drive's also bursted. But I'll try to find a way to attach the weapon motors to anchors and see how it fares. :D
5397
« on: January 24, 2010, 07:49:09 AM »
Slims are drive motors.
5398
« on: January 24, 2010, 02:42:51 AM »
Here it is! This is Fission:  Your everyday 36-HS, but with nicely placed weapon motors and a caster for maximum protection. I was kinda amazed that Surge 2 and ArtillerY were still invertible even with components going over the wheels' reach. I tried it here, and it's invertible as well. Kewl. And here's a slightly more exciting bot, Apophysis:  2 blacks, 4WD, 8 razors and 8 maces, 2 plows. Inspired by Sage's juggler, I tried to improve it and add my own twist into it, but the evil wedge problem again. It can only rival Infra's. D:
5399
« on: January 24, 2010, 01:04:34 AM »
Yeah, I still kinda suck at DSL compared to others. But I'll be back once I'm tired of Stock. :P
Woohoo I'm in the ranks! XD
5400
« on: January 23, 2010, 09:29:22 PM »
<3 <3 <3
You could probably remove the 2 topmost casters and find some more weight to give it rubbers.
|
Show Posts