This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Messages - COOLRUNNER87
Pages: 1 ... 15 16 17 18 19 20 21 [22] 23 24
421
« on: March 11, 2010, 11:50:04 PM »
(Image removed from quote.)
Ahh yes, the original 2001 Pontiac Aztek. I remember seeing that thing for the first time on Survivor's final episode of the first season and wondering "What the  is Pontiac thinking?". Sharp angles and an odd double-grill were the least of the ugliness of that thing. Also, I'd like to put in here the Nissan Cube in this. Even though the first 2 foreign versions look closer to a Scion xB (which is still not that good considering the xB is a boxmobile), the third makes the thing look even more silly. Curved everything, just for the sake of being curved, is just too much.
422
« on: March 11, 2010, 11:40:14 AM »
Can someone change his weightclass to Underweight ?
That would be great idea! 
All I've got is one word: Hi-larious!
423
« on: March 11, 2010, 09:26:28 AM »
424
« on: March 10, 2010, 09:17:17 PM »
*palmface*
Thanks for telling me that.
Now you know, and knowing is half the battle.
:D
G.I. DRRRRRRRRRRRRRRRRRRP!
425
« on: March 10, 2010, 07:10:41 PM »
No he is just renaming his pictues into png, it doesnt work like that!
His pictures are .png.bmp
If you open up the picture in a new window you will notice that it says on the adress bar that its .png but on the window name bar it says BMP picture.
*palmface* Thanks for telling me that.
426
« on: March 10, 2010, 10:30:20 AM »
(Image removed from quote.)
... because you keep using BMPs.
Uhh... Jack? I use .PNGs...
427
« on: March 09, 2010, 05:05:05 PM »
Try making the chassis a tiny bit smaller to eliminate the 0.2 kg.
Did so, lightened it up about 4 kg with Titanium upper panels (it's to 396.X kg now).
428
« on: March 09, 2010, 11:23:21 AM »
How is this a clone ?
Anyways, you did it right ! You have 4 kg to work with though. Maybe upgrading the upper Alu sheets to Titanium.
If those 4 kg's didn't put me into Heavyweight land... Is there any way for me to change it up so that 399.X kg still equals middleweight?
429
« on: March 08, 2010, 03:48:15 PM »
Clone? It looks okay though. You might wanna add an extender or skirt on top of the bar so it can self right easier.
It can self right pretty easily. The Quad Mag has plenty of power just to throw Drazah back on its wheels if it does get flipped.
430
« on: March 08, 2010, 12:38:06 PM »
Alright, time for the update on Drazah:  The insides (with weapon removed for better view):  Changes: -Shrunk height of chassis to the lowest point it can go (thanks, d-lark) -Upgraded weapon motor to Quad Mag Gearbox -Changed wheels to Hypnos (any larger, and the realistic rule would be broken; the bar barely skirts over it) -Changed motors to NPC Left/Right -Changed up wedge configuration to have 2 80cm Aluminum extenders on a skirt hinge and a 120cm Aluminum extender on a metal hinge (providing that feeder quality the last make didn't have) I'll be testing this out later today.
431
« on: March 08, 2010, 12:21:03 AM »
Yes you can I believe, when changing the chassis hight, move the slider up to the very highest it can go, then instead of sliding it, move your mouse as low as you can on the slider and click, it will move the chassis lower than what you normally can, If you dont believe me click on the slider afterward and you will notice it moves the chassis height higher, to make it lower again just repeat the process.
*takes a look at it* *does it* Holy Cow, you're right! Time to put that back on the sketchboard. I'll do it tomorrow, though, since my time just got consumed with Fallout 3 and Mothership Zeta. Also, Naryar, I'll be sure to do that once I re-do it tomorrow... only question is, what do you mean by axle-loading the E-Tek? I'm not too familiar with the various glitches in game. (p.s. Naryar, have you had a chance to read your PM's, especially ones concerning the Wiki?)
432
« on: March 07, 2010, 08:39:56 PM »
Use the Left/Right NPCs so you can use Vlads (same grip and more hitpoints for less weight). And you can't get under opponents because your wedge height is incorrect. The metal hinge should be flat against the ground for it to be effective. You might need to lower the chassis a bit so you can add a skirt hinge wedge as the feeder wedge.
Can't exactly flatten the chassis anymore, as it is as low as it can go. Also, thanks for the advice. I'll fix it in a few minutes.
433
« on: March 07, 2010, 08:25:36 PM »
Since I haven't done an update in a while, here's what I've got up-to-date on Drazah: .png) The insides: .png) Changes: -Removed Back Skirt -Added 2x NPC-T64's with 2x Slipperbottoms -Changed to hinge wedge with 120cm Titanium panels It's still got issues with getting under the opponents. Any advice on what to do there?
434
« on: March 02, 2010, 02:43:11 PM »
Sparkey beat Jonzu? That's just plain stupid.
Then again, look who voted for Sparkey. That should give you a whole lot of answers.
435
« on: March 01, 2010, 06:54:55 PM »
I voted 8 due to the sheer awesomesauce of a transforming FS to VS.
Or maybe because it's yours...
Its either his or Sparkey's... even I don't make those type of failbots. I personally voted for #5, a great design through and through. Whoever created this, my hat's off to you. Also, hats off to #6 and #7 (which I suspect is Sonny being the Replica maker that he is). Reier: #3 isn't 100KG underweight. It's a bit hard to read, but it looks like it's 781.1kg.
436
« on: February 17, 2010, 10:48:38 AM »
Nothing like Silver Star 2. After seeing lloopp's post, I was thinking Hypothermia before ounce remembered me of The Digger (that is better :P)
Anyways, i do believe you can use Vlads and save 4 kg.
I've done that, and changed up the frontal skirt to Titanium.
437
« on: February 16, 2010, 09:44:19 PM »
I first heard about Battlebots on the old On Demand channel (this was early 2000; a week or so before I turned 13). From there, I was hooked. Watched almost every single episode of Battlebots from its debut til its demise. Also watched 2nd Series Robot Wars on the local PBS station (right after The Red Green Show; 11 p.m. EST), 4th Series on TNN (Grand Champions), and almost everything else I could under the sun (I missed the Nick Robot Wars since it was blink and miss it; same deal with Robotica Series 3).
In short, I'm a MASSIVE nerd about robots. I've always wanted to build one, but monetary reasons (read: lower middle-class family) and a lack of actual fighting in a 3 hour radius kept me away from it.
438
« on: February 16, 2010, 04:19:37 PM »
You have the weight to upgrade to a metal hinge wedge, and I think Vlads would be better here.
Nary's gonna be pissed when he sees that you cloned one of his bots, but don't worry; most builders start out cloning other bots.
...wait...
I didn't even take a look at Naryar's DSL showcase. I just wanted to create a LW version of Bullseye (which, in turn, is a MW version of Shebeast). Also, I really want to keep the 3-piece front wedge. Having hinges, while better, would only give me one wedge that would not be as effective as having the full wedge.
439
« on: February 16, 2010, 03:20:52 PM »
Update on Private Eyes:  The insides:  Changes: -Front skirt reduced to 40cm polycarb -Removed back stabilizer (worried about this) -Changed weapons to 8x Small DS Teeth So, should I change anything up? It does have a rather exposed rear, and I fear that I can be beaten the crap out of that way.
440
« on: February 12, 2010, 07:46:29 PM »
Now that you actually know how to take a screenshot, read this:
https://gametechmods.com/forums/index.php/topic,2143.0.html
Hell, that even helped me. Thanks, Scrap Daddy. Also, Sparkey: not bad. The only things that I can think of to make that robot better are to change the wheels to Rubbers or something a little better than that and to put the multi-extenders on instead of the anchors.
Pages: 1 ... 15 16 17 18 19 20 21 [22] 23 24
|
Show Posts