Or: "To Chain Or Not To Chain?"
We all know that both chained motors and bursted motors improve speed quite a bit, but by just how much? In this post, I'll be comparing RPMs of a few chained setups.
To answer this, I threw about 290kg of weight onto 4 different chained setups:
Bot of the month of all months coming through(note: I would have used the standard 9-mace weapon arrangement that most actual stock bots used, but the problem there is that
RA2 only runs at 30FPS I record at 30 FPS (whoops). If a single rotation is made in less than a frame, than measuring it's RPM is effectively impossible. Increased weight should weigh down each setup equally, anyway.)
From top, clockwise:
A standard set of chained motors, 2 chained HPZ (shortened as "HPZ+HPZ")
A weaker motor to compare how motor speed affects overall RPM, HPZ chained to Redbird (shortened as "Redbird+HPZ")
A base statistic to compare to, Standard HPZ chained to nothing (shortened as "HPZ")
A random chaining idea that popped into my head while doing this, HPZ chained to servo (shortened as "Servo+HPZ")
To calculate the RPM, I recorded about 30 seconds of spinning 2 sets of motors up:
I then took the raw footage and counted how many frames were required for the red extender (recolored white for aesthetic purposes) to make 1 and 3 rotations. The framecounts were taken after 25 seconds of spinning so that they were measured at their maximum speed.
The average RPM was found by taking the number of frames in a 30FPS minute (1800) and dividing it by the frames needed for 3 rotations, dividing it again by 3 so that the single-rotations-per-minute is displayed rather than the triple-rotations-per-minute.
Weight cost and how much RPM you get for each KG spent on each setup are also listed in the table, as I feel it's useful information in determining if chaining is really worth it or not.
Here's a table with all the info in it:
Observations of Note:-Chaining seems to enhance overall RPM exponentially, rather than incrementally.
-Chaining is more than worth the weight required to do so, at roughly 5-6 RPM for every KG spent compared to the HPZ's 1.8. This means a standard HPZ+HPZ is 320% as efficient than a single HPZ.
-As demonstrated by comparing Redbird+HPZ to HPZ+HPZ, using faster motors seems to increase overall speed, but not spinup time.
-Trying to chain HPZ to servos to be fancy and cool isn't very effective at all. The increased RPM is likely just from the fact that attaching spin motors to any kind of axle will increase their speed.
-For 290kg of weight, it took the Redbird+HPZ and HPZ+HPZ 10-13 seconds to spin up, the Servo+HPZ took 7-8 seconds, and the regular ztek was almost instant. These would decrease with less weapon radius and weight, however.
TL;DR: Chained motors are a lot better than you thought, even if RO7 makes them situational.
Up next: axle mount/snapper/servo boosting. Feel free to suggest other things to cover ITT as well.
Show Posts
