gametechmods
Off-Topic => Off-Topic Discussion => Topic started by: ACAMS on November 02, 2008, 01:09:55 AM
-
[media]http://www.youtube.com/watch?v=u8NwWBIzllc&feature=related[/media]
-
:O at the acceleration !
-
Badass is right!
-
Not seen such a 'stock looking' truck have such acceleration. On the street you could upset some large egos real easily,... hehe.
-
thats awsome. i wish i had a vid of the 84 elcamino that runs my hometown track. it is stock looking with a supercharger and DOT slicks no NOS. it will run a 9.10 all day long lol
-
ok here is the 1917 dodge bros. rat rod my friend and i are making. its got a chevy 350 and a poniatc rear end. the front end it off a hay wagen but its off a ford modle T. lol the frame was hand made by us.
(https://gametechmods.com/uploads/images/952931107081750.jpg)
-
I love rat rods, they have so much more character than "easter egg" painted cars. Those are some nice pipes, unfortunatly they aren't street legal.
As many of you know, this is my car:
(http://img80.imageshack.us/img80/2069/gto2jo7.jpg)
-
oh but they are my firend had the state cop come out to check it out and tell up if we could use them and as its titled as a 1917 then it can run them. we did have to put baffles in them though. and here is my dream van.
http://www.youtube.com/watch?v=4ecgFbDop3Q
-
Well then you got lucky, nothing wrong with straight pipes! Baffles aren't too bad.
-
You could just put a big engine and/or a ton of nitrous in the back.
-
K-3, I'm also from the MidWest. And there are allot fewer laws out there, than here in Mass. A cop once pulled me over in my Chevy-powered Fiat, just to ask if he could drive my car.
Cuda, nice rod. Wouldn't want to be sitting next to it at a light, when someone tromps on it....
-
lol it has no rear traction. i think we measured the last burnout at like 200ft lol it just hops thats why we are redoing it.
-
my car: a brand new 2009 Dodge Challenger.
-
Here is mine. It is invisible and you can walk through it.
(https://gametechmods.com/uploads/images/9506parking_lot.jpg)
-
my car: a brand new 2009 Dodge Challenger.
Sorry about your luck.....don't they have any chevy dealers in your area?
-
I can't drive anyway, but yes they do.
-
I can't drive anyway, but yes they do.
he wasn't talking to you.
-
Oh.
-
oh come on ACAMS that was low even for bowtie man. lol
-
Sorry about your luck.....don't they have any chevy dealers in your area?
This is going in my sig. Because that was awesome.
-
Inf got pwned :O
-
I like my bicycle.
-
ill give you bowtie boys this. chevy makes the simpleist motor..........corse they have the most simple people working on them.........
-
ill give you bowtie boys this. chevy makes the simpleist motor..........corse they have the most simple people working on them.........
...>:Confused:<
....
-
I like my bicycle.
Bicycle!
Bicycle!
Bicycle!
I want to ride my bicycle I want to ride my bike,
I want to ride my bicycle I want to ride my bike!
-
(http://img393.imageshack.us/img393/4493/attitudeqt7.jpg)
-
how did i KNOW that was coming lol
-
Sorry about your luck.....don't they have any chevy dealers in your area?
Sorry, but at least my Challenger looks like a Challenger and has the power to prove it. The Camaros...not so much.
-
PAWNAGE!!!!!!!!!! well said II. any idea what it will realy do in the 1\4 mile.
-
About 30 minutes....depending on how long it takes the tow truck to hook up.
-
Cuda:
About 30 minutes....depending on how long it takes the Chevy tow truck to hook up.
....hehe...
When Chrysler named the their performance vehicles, they just said:
......"Cuda done allot better.... It needs Mopa'er."
--------
Inf: A friend of mine has a Challenger like yours; it's pretty nice and even fast (for a newer car).
...
-
5. Peugeot 20CUP
4. Fiat 500 Arbarth
3. Ariel Atom
2. Radical SR3
1. Caparo T1
-
i dont know why i stay here.... oh ya its cause i love simpletins
-
its "simpleton"...cant really call people simpletons if you can spell the word yourself...
-
lol untill this site has spell check then im hopelessly lost lol
-
when you type and a red line appears below your word, it's spelled wrong. in that case, right click and choose from the list of words that pop up.
-
that never happens to me?????
-
Not everybody uses firefox sage.
-
2005 Subaru Impreza WRX STI
2007 Suzuki GSX-R750
very American of me, aint it.
-
Imprezas are great cars, I don't know about the GSX though.
-
Suzuki cappuccino lol 138HP OMG ITS FAST
(https://gametechmods.com/uploads/images/58684SUZUKI.jpg)
and here is the team that is my avatar and the cars that hooked me on cudas for life.
ACAMS here a ? for you is this a 72, 73, or 74 cuda???lol
(https://gametechmods.com/uploads/images/43750sox_11.jpg)
-
I'm going to guess 73.
-
I would have guessed 68, but i cant. i'll go with kill343gs' guess of 73.
In an old game called Forza Motorsport, I have a 1969 GTO. it has all of the professional upgrades. handles better than a subaru impreza. good for drifting.
-
Drifting a '69 GTO?!? I think I put a picture of my Chevelle up somewhere on these forums, planning on doing quite a bit of work this winter, haven't touched it for a few months. :)
-
68???? how old are you here is a 68 lol
(https://gametechmods.com/uploads/images/3268668cuda.jpg)
-
ACAMS here a ? for you is this a 72, 73, or 74 cuda???lol
(https://gametechmods.com/uploads/images/43750sox_11.jpg)
I have chunked beer cans made better than that!
Anyway who cares!
Here....search my car pics and see if you can find one..http://myfolderz.com/Automobile/Cars.php
-
and not counting the 68 i found a feww pages back.....
http://myfolderz.com/Automobile/Cars.php?pg=18
and a few more athe bottom
http://myfolderz.com/Automobile/Cars.php?pg=18
still more
http://myfolderz.com/Automobile/Cars.php?pg=20
THEY JUST KEEP COMING!!!
http://myfolderz.com/Automobile/Cars.php?pg=21
are you a CUDA fan thats in the closet?
http://myfolderz.com/Automobile/Cars.php?pg=22
cause its starting to look that way
http://myfolderz.com/Automobile/Cars.php?pg=23
ok one last cuda for the road
http://myfolderz.com/Automobile/Cars.php?pg=25
-
i want a Robin Reliant with a camper shell.
-
Somebody obviously hacked me and put those damn mopars in my folder. I guess Sox & Martin are running a 318 2bbl since 318 and 360 were the only engines available in 74.
-
i dont know for sure i trying to find out but my nets going out.
http://www.youtube.com/watch?v=pI8BM2__8Yc i know it stupid but i thought of you ACAMSlol
-
i'm just gonna make a point here: muscle cars rule. especially if they have profesional parts.
-
I bet rod knocking 70HC would like to have this pic......BUT I am not gonna let him have it.
(http://myfolderz.com/Automobile/misc/1970_Hemi_Cuda_ScatPack_Cartoon.jpg)
-
its easy enough for him to get it anyway.
-
He probably wants this too.......but can't have it!
http://myfolderz.com/Automobile/1960_2009/1970%20Plymouth%20Hemi%20Cuda%20coupe%20-%20black%20-%20fvr.jpg
:tongue:
-
He probably wants this too.......but can't have it!
http://myfolderz.com/Automobile/1960_2009/1970%20Plymouth%20Hemi%20Cuda%20coupe%20-%20black%20-%20fvr.jpg
:tongue:
Nice car. But I can't see it very well cause those 2 guys are standing in front of it.
.....
-
Yep, and that black funny looking object is blocking it too.....I wish somebody would throw it in the trash!
-
imagine.. that motor in a car that doesn't weigh but half of that truck plus 90% less drag...
My car: 1984 300zx twin turbo 3.0 5 spd.
Dont think I'm bragging it needs alot of work on the suspension but it flys balls.
about the truck though (i'm not bashing) I just hate Nos. turbos, superchargers, and blowers are kewl. personally I favor the whine of the turbo.
I'll take some pics of my car tomorrow (it looks horrible) and post them.
-
I really like the whine of a turbo or blower too. But Nitrous is subtle, free(non-taxing power wise), lower heat, and endless HP (until your lower end gives out... hehe).
-
"Injection is nice, but i'd rather be blown." - Old racing adage
-
Why not both?
-
well no i hadnt seen tht pic BUT this is my 1\2 done tatto im getting ill post a pic when its done
(https://gametechmods.com/uploads/images/4599l_92a7c767070f5d6a0b5e6e2220445dc1.jpg)
-
Might as well post my car again. I recently bought a new project car because... well I just wanted to. :D I'll post some pictures soon.
(http://i98.photobucket.com/albums/l254/andrewm0304/engine.jpg)
(http://i98.photobucket.com/albums/l254/andrewm0304/mycar.jpg)
Here are the cars me and my friend ran this year, actually won my last derby 2 months ago. :)
(https://gametechmods.com/uploads/images/24518cars.jpg)
-
Nice Chevy. Let me guess; 350, Edelbrock Torker, Carb???.
Clean.
..
-
That intake is a Performer.
The blue car looks like something goose would drive.
-
That intake is a Performer. Yep. I think you is right.
The blue car looks like something goose would drive. Yep. The drivers around Chicago are like that...
..
-
Nice Chevy. Let me guess; 350, Edelbrock Torker, Carb???.
Yep. :D Here is some information I can think of off the top of my head. Haven't seen the car since July, its in storage but I plan to get it out this weekend.
- 350 Smallblock
- Manual (Duh.)
- 400-450 HP... not really sure, probably should get a dyno. :P
- Hotchkis Rear Suspension Kit (Recently bought, not currently on the car)
- Custom hood, can't remember what brand though.
- Edelbrock Performer Intake Manifold.
- Flowmaster Exhaust Pipe Kit
When I first got it the car it was rusty and just a mess really, and when I started to restore it I wanted to keep it mostly stock. I changed my mind over time and I am actually debating wether or not to make it completely a drag racing car. I take it down to the track in the summer anyways, but I still think it would be cool... dunno.
Goose, you can have that car if you want it. ;)
-
If I were you I wouldn't make it an all drag car. Not even Pro Street.
-
400-450 HP... not really sure, probably should get a dyno. :P
Getting 1 HP per cubic inch is hard to do with your setup......I would guess 300 - 325 (at best) unless you have very good heads and an almost unstreetable cam.
I am actually debating wether or not to make it completely a drag racing car.
The car weighs almost 2 tons......most people that drag race those use a well built bigblock!
It would make a nice daily driver.
-
It would make a nice daily driver.
Wait .... are you still talking about the chevy, or the blue car for Goose?
Ah, well ..... here's my daily driver:1973 Volkswagon Bug, 1600ccc dual-port engine, "old's cool" paint job, '79 transmission, new headliner, still working on the interior. This was taken at a mini car show/cancer benefit. Yes, that's my pint-sized ratbike in front.
-
Yeah, I was never quite sure what the actual HP was, sounds stupid I know. I think that it is higher than that though, probably 350-375 when I think about it. I was planning on doing a lot of work to prepare it for a drag racing car, completely new engine and all that. I just picked up a new car to work with so I might just experiment and see if I can do it with that one.
Cool bike SpyGuy. :D
-
Which car was the derby winner?
-
SpyGuy: Not sure if I like the directionals on the front fenders, but cool nonetheless.
-
Which car was the derby winner?
The third car from the start, the grey truck with turnout pipes. There were only 20 or so trucks that turned out, but some tough competition.
-
Kill: Those are the originals that came with the car. I left 'em as is.
Andrew: Here's a couple more pictures of The Rat:
47cc NF Cagllari/Daytona pocketbike, 1st generation frame. (Year unknown)
Background: Bike was a craigslist.com special for $ 80.00, quite a mess when originally received - previous owner had used it as an offroad bike, and in sorry shape.
Current list of modifications:
-Modified VW gas filter
-Altoids can air cleaner
-DuPont spraycan muffler
-Dremel wrench killswitch cover
-Gas tank hard-mounted to frame, barb on tank drilled out two sizes larger
-Gas cap modified with breather tube, topped by in-tank gas filter
-Custom seat, pad glued to sheet steel, supported by cut-down office keyboard track
-BMX Mongoose footpegs on original tapped studs
-Custom "Street Freeks" logo on side of pullstart
-Duct tape on front fork leg holding down brake cable
Miscellaneous Other Specifications:
-Wheels: Zhongya 90x6.5 front, 110x6.5 rear
-Gearing: 7th pinion, 68th sprocket
-Carburetor: ported stock, 72 jet, all Phillips screws on carburetor replaced with Allen head screws
-Petcock modded by drilling out original holes to 1/8", knob channelled deeper
-Triple stage reed mod
-Reed stop mod
-NGK spark plug
Top end: about 30-ish mph last time I checked. It sure draws a crowd whenever I take it out for a run, or to a show. The owners of a motorcycle shop were having a grand re-opening, and invited me and several of the guys to come do a demo race in their back parking lot. All day, people were walking by the bike, and saying, "How did you do that? Look at what this guy did to his bike!" Lotsa fun ...
-
1957,8,9 Chevy rolled into one!
57 in front, 58 down the side and 59 rear.
(http://myfolderz.com/Automobile/Custom/Chev789-2.jpg)
http://myfolderz.com/Automobile/Custom/Chev789-1.jpg
http://myfolderz.com/Automobile/Custom/Chev789-3.jpg
http://myfolderz.com/Automobile/Custom/Chev789-4.jpg
-
That IS different. :Confused:
I've never even thought of a car like that. Good job; looks natural.
-
I think they should sell that as a new car. :D
Thats cool though, has an older look to it but a modern look as well.
-
I 2nd that. Nice looking car. That yours, ACAMS?
-
The windshield looks like its off of a 1990s camaro.... And I can't stand the 59's rear end.
-
The windshield looks like its off of a 1990s camaro.... And I can't stand the 59's rear end.
Yeah, the windshield and the interior kind of set it off... makes it look newer.
-
I 2nd that. Nice looking car. That yours, ACAMS?
Yes, built it.
OK.....maybe I lie sometimes.
This car was built by N2A motors (No Two Alike). Cost $40,000 over cost of new Corvette C6 (MSRP $44,000). The company is planning a production run of about 100 vehicles. It sits on a Corvette C6 chassis, front styled like a 57 Chevy, side like a 58, rear like a 59.
And I can't stand the 59's rear end.
WHAT?????? :o
THAT'S CUTE!!
(http://myfolderz.com/Automobile/Custom/Chev789-4.jpg)
-
ALIEN IS ANGRY!
-
The only American car I'll ever want:
(http://damox.com/cars/thumbs/Delorean/1981_Delorean_DMC12.jpg)
-
delorean <3
i prefer the new one though
(http://farm1.static.flickr.com/180/393947928_425e9eacda.jpg)
-
The only reason why he wants it is to put a Mr. Fusion on the back to power the flux capacitor .......
-
The only reason why he wants it is to put a Mr. Fusion on the back to power the flux capacitor .......
Sshhh!
-
Bak 2 da future
-
Bak 2 da future
Some of the greatest movies ever.