Author Topic: .Py bindings help (Read 10646 times)

GroudonRobotWars · « **Reply #60 on:** June 24, 2010, 09:44:58 PM »

5 of 6 work. Spinner from the west is the only one that does not work

Trovaner · « **Reply #61 on:** June 24, 2010, 10:18:34 PM »

Assuming that you got SFTW from the BBEANS AI Pack:
Do you have SpinnerOmni.py in your AI folder, adaptiveAI_2.txt in the main RA2 directory, and the arena Epic Showdown installed (and working). It has to do with one of the Easter Eggs of the pack.
Otherwise, you could switch the AI.py listed in the bindings to just plain "Omni".

GroudonRobotWars · « **Reply #62 on:** June 26, 2010, 02:09:12 PM »

Can anyone post the stock rookies team and the extra robots bindings for my stock version so i can make them AI

GroudonRobotWars · « **Reply #63 on:** June 29, 2010, 05:34:09 PM »

Could someone please send the bindings

Clickbeetle · « **Reply #64 on:** July 01, 2010, 11:13:39 PM »

There are no bindings for the Rookies and the XTRA bots, unless someone made some (though I don't know why you would bother especially since Forkie would require a custom .py).

Sparkey98 · « **Reply #65 on:** July 01, 2010, 11:17:42 PM »

JoeBlo · « **Reply #66 on:** July 01, 2010, 11:59:21 PM »

it uses a servo to lift

G.K. · « **Reply #67 on:** July 02, 2010, 04:01:37 AM »

I AI'ed them for my 128 MW bot tournament. I replaced Forkie's servo with a snapper2 though.

GroudonRobotWars · « **Reply #68 on:** July 02, 2010, 12:30:23 PM »

I plan on adding them into a tournament with all the other stock ai and other robots I aied.

GroudonRobotWars · « **Reply #69 on:** July 15, 2010, 04:00:14 PM »

New problem i need to ai my ELBITE Entrys and i am stuck on two robots the first one is one of them is a bot like Mako and it has one spinner and the weapon attached are The Boxers weapon. which weapons are they for the numbers at the end?

G.K. · « **Reply #70 on:** July 15, 2010, 04:01:40 PM »

What .py are you planning to use?

GroudonRobotWars · « **Reply #71 on:** July 15, 2010, 04:03:13 PM »

Quote from: G.K. on July 15, 2010, 04:01:40 PM

What .py are you planning to use?

Omni

G.K. · « **Reply #72 on:** July 15, 2010, 04:04:15 PM »

Then the number you put there won't matter. The tactic of the .py is already engage. You can put whatever you like there. Make sure that if it's only one number you use, you have a comma after it.

GroudonRobotWars · « **Reply #73 on:** July 15, 2010, 04:04:50 PM »

Code: [Select]

    # 29 - The End of the Road
    list.append(("The Dark Boxer","Omni",{'invertible':True,'nose:math.pi*2,,range':50,'radius':1.2,'topspeed':100,'throttle':130,'turn':75,'turnspeed':3,'weapons':(
    list.append(("Angry German Kid","Flipper",{'nose':math.pi*2,'radius':1,'topspeed':100,'throttle':130,'turn':100,'turnspeed':3.5,'weapons':(14,)}))
    list.append(("Beserk Killer",

This i what i so far got

G.K. · « **Reply #74 on:** July 15, 2010, 04:05:48 PM »

I presume we're referring to the dark boxer?

GroudonRobotWars · « **Reply #75 on:** July 15, 2010, 04:07:13 PM »

Yes to the Dark Boxer.

And I have no clue what Beserk Killer is. It spins but not with no motors used.

G.K. · « **Reply #76 on:** July 15, 2010, 04:09:14 PM »

Try

Code: [Select]

    list.append(("The Dark Boxer","Omni",{'invertible':True,'nose:math.pi*2,,range':50,'radius':1.2,'topspeed':100,'throttle':130,'turn':75,'turnspeed':3,'weapons':(1
,)}))

For the dark boxer.

Can you post a pic of Beserk Killer?

GroudonRobotWars · « **Reply #77 on:** July 15, 2010, 04:10:15 PM »

Quote from: G.K. on July 15, 2010, 04:09:14 PM

Try
Code: [Select]
list.append(("The Dark Boxer","Omni",{'invertible':True,'nose:math.pi*2,,range':50,'radius':1.2,'topspeed':100,'throttle':130,'turn':75,'turnspeed':3,'weapons':(1 ,)}))
For the dark boxer.

Can you post a pic of Beserk Killer?

Possibly in the next hour or so. Do you think the Bindings for Angry German Kid are correct.

GroudonRobotWars · « **Reply #78 on:** July 15, 2010, 05:09:32 PM »

This is Beserk Killer

GroudonRobotWars · « **Reply #79 on:** July 15, 2010, 10:49:11 PM »

I designed it to be like one of the designs that appeared on Total Annihilation