Author Topic: That Robot is a Spy's DSL Showcase (Read 14892 times)

That Robot is a Spy! · « **on:** December 04, 2010, 05:33:03 PM »

My 32 iron shell spinner. It spins rather slowly though.

G.K. · « **Reply #1 on:** December 04, 2010, 05:34:51 PM »

Insides plz.

That Robot is a Spy! · « **Reply #2 on:** December 04, 2010, 05:47:57 PM »

Tommorow, I promise.
It's an E-Tek Motor. TWNWR's (I think that's how you spell it) and micros.
4 odysseus and 2 ants.

FOTEPX · « **Reply #3 on:** December 04, 2010, 05:54:15 PM »

Fit a 6-mag or Dual Perm in there. I recommend 6-mag, because they spin up faster, and when going up against a 6WD bot, that makes all the difference.

Enigm@ · « **Reply #4 on:** December 04, 2010, 05:56:10 PM »

Quote from: G.K. on December 04, 2010, 05:34:51 PM

Insides plz.

Dang it G.K., you beat me. But yeah, but a pic of teh insides.

Naryar · « **Reply #5 on:** December 04, 2010, 07:57:05 PM »

Quote from: FOTEPX on December 04, 2010, 05:54:15 PM

I recommend 6-mag, because they spin up faster

You don't know what you are talking about !

Oh, and irons are bad overall on shell spinners.

MassimoV · « **Reply #6 on:** December 04, 2010, 08:03:44 PM »

Yeah, go for Razors.

Badnik96 · « **Reply #7 on:** December 04, 2010, 08:41:21 PM »

Only needs 3 ants, then get a 6-mag and NPC's on Hypno's. ALSO MOAR FLAIL RAZORZ

Pwnator · « **Reply #8 on:** December 04, 2010, 08:48:13 PM »

Quote from: Badnik96 on December 04, 2010, 08:41:21 PM

Only needs 3 ants, then get a 6-mag and NPC's on Hypno's. ALSO MOAR FLAIL RAZORZ

4 ants. You would want your motor to spin at full power now that there are more bots that can take it on head-on.

Sparkey98 · « **Reply #9 on:** December 04, 2010, 08:49:39 PM »

Add flail razors by putting hinges on the sides, then adding razors on them.

And don't listen to FOTEPX.

FOTEPX · « **Reply #10 on:** December 04, 2010, 09:10:20 PM »

Diamond Cutter uses a 6-mag. Your statement is invalid.

Also, Sypher, Stop acting like you're something tough.

SKBT · « **Reply #11 on:** December 04, 2010, 09:16:12 PM »

Code: [Select]

name = 6 Mag Gearbox
preview = twm_preview.bmp
dir = TWMmotors
model = TWM3R6.gmf
type = mechanics
base = SpinMotor
master = motor
passthru = axle_collision
description = This is based off of the gearbox from the robot Tornado Mer, but mounts SIX 3" magmotors to one shaft.  The second most powerful option available to spin your weapon, but draws 144 amps.
power = 245 35
attaching = axle
elecMaxInOutRate = -1440
motorsound = sounds\bigmotor_loop.wav
attachsound = sounds\cmp_generic.wav
standard = 1
mass = 116

Code: [Select]

name = Dual-Perm 132 Gearbox
preview = dperm_preview.bmp
dir = perm
model = dualperm.gmf
type = mechanics
base = SpinMotor
master = motor
styles = Default
passthru = axle_collision
attaching = axle
description = As if one Perm 132 isn't powerful enough, this mother of all weapon motors will probably have more than enough power for whatever nefarious uses you can think of with an incredible 68 torque - it can't reach as much RPMs as the 4-Mag and 6-Mag however, having 200 maxspeed like a normal perm. It's extremely heavy though, and only of use in such bots. It has 11000 hitpoints and 300 fracture !
power = 200 68
elecMaxInOutRate = -3094
sort = 10
fracture = 300
motorsound = sounds\motorloop2.wav
attachsound = sounds\cmp_generic.wav
standard = 1
hitpoints = 11000
mass = 180

Looks like Dual Perm is better.

(I used the NAR AI Dual Perm because I didn't feel like decompiling the Components .CFZ file.)

Naryar · « **Reply #12 on:** December 04, 2010, 09:58:05 PM »

Even though, the DSL 2.1 Dual Perm has more torque than the DSL 2.1 6-Mag. What it has less is maxspeed, but it doesn't matters more.

And you guys WILL stop spamming or i might start to remove posts...

G.K. · « **Reply #13 on:** December 05, 2010, 03:59:41 AM »

Quote from: Sypher878 on December 04, 2010, 08:49:39 PM

Add flail razors by putting hinges on the sides, then adding razors on them.

By hinges he means axle mounts.

That Robot is a Spy! · « **Reply #14 on:** December 05, 2010, 04:34:22 AM »

This is my newer version.

Pwnator · « **Reply #15 on:** December 05, 2010, 04:37:16 AM »

Drop it to 2WD (NPC/NPCFs + Hypnos would be faster and lighter than that). That will give you weight for more stuff.

That Robot is a Spy! · « **Reply #16 on:** December 05, 2010, 04:51:19 AM »

My computer mouse is being a brat at the moment. So I will have to wait till it recovers.

That Robot is a Spy! · « **Reply #17 on:** December 05, 2010, 12:15:25 PM »

The stupid NPC's wont fit

NFX · « **Reply #18 on:** December 05, 2010, 12:24:23 PM »

You could have the NPC's hanging out of the chassis if you need to. Shift the batts around, that'll make more space for them.

That Robot is a Spy! · « **Reply #19 on:** December 05, 2010, 12:26:04 PM »

Then I'd have to use a 250 disc.