Sylandro's DSL Methlab

[Sylandro]

sylandro if you are limited it's because 75% of your posting is just plain bad.

If it wasn't clear enough.

Alright, i'll stop my crap posting.

Those hammers will hardly ever hit anything because I doubt anything will go up the skirts. I'd also try find more weight efficient ways of stabilization.

Also on the original 'salad' thing you should tilt the motor angle up so you don't need to start with your wheels off the ground and your skirts on the ground. Them being flat when you start is hugely advantageous to turning and stability. Try putting the mag onto one of the flipper segments on the side, which means it's easily angled and you can get rid of the 3rd multi inside the chassis.

I'll see what i can do.

That disc seems way too high and off centered. I don't remember the original salad so just take the advice from Craaaig. Alia's not bad but I think everyone's made hazard by this point. And get your anime crap out of the showcase section, we don't care about it.

It's a Megaman X fan character, you dingus. And i'll try to fix Starship Exodus.

[MassimoV]

That disc seems way too high and off centered. I don't remember the original salad so just take the advice from Craaaig. Alia's not bad but I think everyone's made hazard by this point. And get your anime crap out of the showcase section, we don't care about it.

It's a Megaman X fan character, you dingus. And i'll try to fix Starship Exodus.

I really don't care.

[powerrave]

The bots, can be better, but that pointed out by now. The character- Why are people even complaining? ... Maybe it's better if this isn't answered since there is really no good reason for it anyway.

[090901]

1) Starship Exodus is still terrible and would look much better with a circular chassis

How is it terrible? Just because the disc isn't align? It looks better than most of your IRL bots too. Also it would look worse with a circular chassis.

[Naryar]

1) Starship Exodus is still terrible and would look much better with a circular chassis

2) Whyachi hammers were probably the worst course of action on Frozen Salad, and you have 2 too many skirts.

3) Alia is generic and it looks ugly.

4) Why would you put a freaking fan character that isn't even yours in your showcase oh my god

Not sure if this is advice or just hating on someone, hidden as "advice".

You need to chill and stop attacking sylandro everywhere. Yes his posting is obnoxious, yes he is a poor builder, but this sort of posting isn't improving things, actually it's just getting sylandro to think he is completely hopeless as a builder.

You have got good points... except no, it's not terrible, frozen salad's worst thing are it's wedges not it's weapons, and also an important point: the delivery of this post is terrible. Right now it sounds like you're insulting him and his building more than "advice". You haven't posted ONE thing to help him grow as a builder. Not a single one.

Yes, we need to point bad things in bots, yes, we need to point mediocrity in builders that think they're good. Except that your post is doing it wrong, basically.

Next time consider how your post will be received before posting.

Now for advice...

Starship Exodus is OK for IRL. Needs to be symmetrical, and then add things on it so it's cooler.

Frozen Salad is poor mostly because your spinners are tiny, and long static wedges are bad. Whyhachi hammers ain't the best choice of weapons either

alia should just be 2WD but stronger and have better weapons.

[Mr. AS]

3) Alia is generic and it looks ugly.

almost as generic and ugly as this?


really the only thing sylandro should do is to center the disc and the sponsor decal and it will look A-OK.
dont like frozen salad though.... wedge seems useless. replace the weapon with a dual axle etek and have stabilizers instead of those static wedges.

[Badnik96]

jesus do you have to bring up everything

anyway it was meant to be actual advice. Dunno what merited a warning there.

[Sylandro]

Lol guys, why are you causing a sh*tstorm.
Anyway, here's my new Battlebots 7 Team.

Atomic Waste (LW)

Generic LW SNS for all your SNS needs.

The Man (MW)

MW Undercutter, name comes from this- http://en.wikipedia.org/wiki/The_Man

Thorny Devil Returns (HW)

HW Dual VS, T'was meant for the awesome. LOOK AT THE MOTOR AND DISC SUPPORTS!

And the SHW stays the same.

[Probably Rob]

(Image removed from quote.)
AND DISC SUPPORTS!

But there is no disc support, you need to put support[er]s next to the middle of the discs. Besides that, I kinda like it.

[Badnik96]

The Man's weapon motor is way too exposed and TDR's weapons appear to be cutting thru the perm belt.

[Sylandro]

Oh really guys? Look.

[Tweedy]

That looks like the hypno tooth on the other disc is intersecting part of the motor, you also need better motor support and axle support on both sides.

[Probably Rob]

Oh really guys? Look.
(Image removed from quote.)

Yeah, and the other side?

Edit: Plazmic beat me to it, I suppose!

[MassimoV]

I actually like the first 2 quite a bit. The HW needs 2 bars on each side to make it cooler.

[Sylandro]

The ghost of FOTEPX has finally taken my soul.

Tite 5. TMW3R Drive.

[Badnik96]

I thought you were already a ghost...

The GTM arena is now haunted by the spirit of Sylandro and surely fear shall strike the hearts of those who dare to have a match there from then on.

I do like the bot though

[MassimoV]

Yeah, not bad.

[Badnik96]

@ sylandro your avatar is a jerboa, I did a project involving one for ecology this year

[Sylandro]

@ sylandro your avatar is a jerboa, I did a project involving one for ecology this year

Yeah, i knew it was a jeroba too.

I thought you were already a ghost...

The GTM arena is now haunted by the spirit of Sylandro and surely fear shall strike the hearts of those who dare to have a match there from then on.

I do like the bot though

Well i became mortal for a few days 

[Badnik96]

@ sylandro your avatar is a jerboa, I did a project involving one for ecology this year

Yeah, i knew it was a jeroba too.

I know, your PT kinda had the impression that you wanted someone to figure it out