Author Topic: RPJK's Probable 6 Month Stand DSL showcase. (Read 4363 times)

RpJk · « **on:** September 18, 2011, 02:56:15 AM »

Decided to make a showcase even though months ago I did not want to make a showcase Because of how it used to crash years ago.
Also I want to build designs like clamps, flippers, Drums, VS's etc.
Ok lets get down to business.

Drumlishment.
Unstable, Fast and underweight.
Armour is Titanium 3mm.

Alright for first bot?

RpJk · « **Reply #1 on:** September 18, 2011, 03:40:44 AM »

(DP)

Any help?

Jonzu95 · « **Reply #2 on:** September 18, 2011, 03:47:09 AM »

Use only ants. You also got too fast Drive motors...

Naryar · « **Reply #3 on:** September 18, 2011, 06:15:07 AM »

Replace anchors by multi extenders, use only ants on drums, NPC Fast with technos would be better as long as the NPC fasts are inside the chassis... also think about how you might want to learn how to lighten your extender work while keeping enough HP. As an example, don't use angled connectors since they have not been upgraded in DSL 2.1 and now suck compared to flippermakers, hex plates or metal sheets.

https://gametechmods.com/RA2wiki/index.php?title=Naryar%27s_DSL_tips

Go read this.

Jack Daniels · « **Reply #4 on:** September 18, 2011, 09:06:26 AM »

<3 the name.

Yeah, what they said. The drive is overkill. Try to strictly use ants for all your builds. The general rule with ants is one per spinning motor and you should be set.

Glad to see you in the DSL showcase section.

RpJk · « **Reply #5 on:** September 18, 2011, 10:47:23 AM »

Quote from: Jack Daniels on September 18, 2011, 09:06:26 AM

<3 the name.

Yeah, what they said. The drive is overkill. Try to strictly use ants for all your builds. The general rule with ants is one per spinning motor and you should be set.

Glad to see you in the DSL showcase section.

People would proabably bet I would be better in DSL.

Anyways I lost the bot while downloading BBEANS DSL.

Anyways I've Got NAR AI 1.1.

One Question

Can I use something other than angle extenders for wedges?
Also I want to become a wedge and drum specialist.

090901 · « **Reply #6 on:** September 18, 2011, 12:43:43 PM »

Quote from: RPJK on September 18, 2011, 10:47:23 AM

Quote from: Jack Daniels on September 18, 2011, 09:06:26 AM
<3 the name.

Yeah, what they said. The drive is overkill. Try to strictly use ants for all your builds. The general rule with ants is one per spinning motor and you should be set.

Glad to see you in the DSL showcase section.

People would proabably bet I would be better in DSL.

Anyways I lost the bot while downloading BBEANS DSL.

Anyways I've Got NAR AI 1.1.

One Question

Can I use something other than angle extenders for wedges?
Also I want to become a wedge and drum specialist.

flippermakers

RpJk · « **Reply #7 on:** September 19, 2011, 12:45:36 AM »

What batteries should I use if I want to bulid a flipper?

madman3 · « **Reply #8 on:** September 19, 2011, 01:19:28 PM »

Quote from: RPJK on September 19, 2011, 12:45:36 AM

What batteries should I use if I want to bulid a flipper?

3 ants or 1 battlepack per BSG, 5 ants for a small JX, 7 for a large JX, and three tall black batteries for Beta bursts.

ty4er · « **Reply #9 on:** September 19, 2011, 01:21:55 PM »

21 (iirc) or 3 black batts should do a beta burst, 2.5 (2 if you're in nar ai) for a bsg.
the others people already posted or aren't worth it :P

Oh and that e-tek is so exposed i doubt the weapons actually hit anything without the e-tek

Naryar · « **Reply #10 on:** September 19, 2011, 02:42:34 PM »

Quote from: ty4er on September 19, 2011, 01:21:55 PM

Oh and that e-tek is so exposed i doubt the weapons actually hit anything without the e-tek

A good point. Just use a Perm 132.

RpJk · « **Reply #11 on:** September 23, 2011, 02:41:36 PM »

Need God-like help on trying to bulid a MW VS.

Armour is Titiuiam 1mm.

ty4er · « **Reply #12 on:** September 23, 2011, 03:59:09 PM »

Either get a wedge or get longer reach (btw, choose the second one :P)
And stop using ba and angles, use flipper segments and multi extenders.
And that chassis is rather huge :P shrink it and try to mount things externally.
Put the skirts at base level so they are flat and get a bit longer reach.

Naryar · « **Reply #13 on:** September 23, 2011, 04:37:59 PM »

Stop using stock anglers and baseplate anchors...

RpJk · « **Reply #14 on:** September 24, 2011, 03:06:46 AM »

Quote from: ty4er on September 23, 2011, 03:59:09 PM

Either get a wedge or get longer reach (btw, choose the second one :P)
And stop using ba and angles, use flipper segments and multi extenders.
And that chassis is rather huge :P shrink it and try to mount things externally.
Put the skirts at base level so they are flat and get a bit longer reach.

So what should I put outside of the chassis?

martymidget · « **Reply #15 on:** September 24, 2011, 03:21:46 AM »

Look at Craaigs showcase if you want the archetypical design for that sort of VS.

/endplug

Once you've seen them, feel free to try and improve it, because I want to see the look on his face when someone does a decent improvement :D

No hard feelings craaig D:

RpJk · « **Reply #16 on:** September 24, 2011, 04:26:46 AM »

Ok trying to do this setup.

Any help?

That Robot is a Spy! · « **Reply #17 on:** September 24, 2011, 07:32:17 AM »

It's not realistic for a start.
Use a DSL Bar.

SKBT · « **Reply #18 on:** September 24, 2011, 08:29:40 AM »

Quote from: martymidget on September 24, 2011, 03:21:46 AM

Look at Craaigs showcase if you want the archetypical design for that sort of VS.

Or some of mine but they are built a bit differently than his.

As for your VS you might want to try a setup like this.

MassimoV · « **Reply #19 on:** September 24, 2011, 01:54:27 PM »

I think it's a little too unstable.