Author Topic: Nightravens Showcase of badly built bots (Read 9487 times)

superbot13 · « **Reply #40 on:** July 19, 2018, 06:25:33 PM »

Wow you are improving

I think having a single spike at the end and having the sides taper down would be a better look

Nightraven Shade · « **Reply #41 on:** August 17, 2018, 07:34:46 PM »

My first try at an extenderbot and yes they all have bottom panels, using 2 npc fasts for drive and flat motors for very vdma burst for flipper and hammer and 2 battlepacks. the front is all steel and mostly ti or steel extenders and panels.

Nightraven Shade · « **Reply #42 on:** August 17, 2018, 07:40:09 PM »

Just for fun i made the granddaddy of all bots.

Nightraven Shade · « **Reply #43 on:** August 17, 2018, 07:50:51 PM »

Last one worth showing is my take on warrior clan. 4 mag spinner and vdma burst for the flipper with 2 tmw2 drive motors.

Dreamcast · « **Reply #44 on:** August 18, 2018, 11:54:29 AM »

I like the whammer. The Grandad needs more structural support for those eyes. I wish the HS was skinned and that you posted all of this in one post.

kill343gs · « **Reply #45 on:** August 18, 2018, 09:57:15 PM »

Keep experimenting, things will start to come together

Nightraven Shade · « **Reply #46 on:** October 17, 2018, 06:19:24 PM »

been while since posting anything here so thought post after using bfe for first time. just a simple 798kg HW overhead spinner design nothing special. Uses steel panels for front, titanium wedglets and Steel5 armor.

Nightraven Shade · « **Reply #47 on:** October 19, 2018, 02:35:54 PM »

New tall flipper 790kg (HW) dual storm powered flippers 2 tmw drive and lots of bats.

Hoppin · « **Reply #48 on:** October 19, 2018, 02:59:54 PM »

Quote from: Nightraven Shade on October 19, 2018, 02:35:54 PM

New tall flipper 790kg (HW) dual storm powered flippers 2 tmw drive and lots of bats.
[ Quoting of attachment images from other messages is not allowed ] [ Quoting of attachment images from other messages is not allowed ]

I'd suggest you upgrade your drive, TMW3 on a HW is really slow. NPC, TMWR2 or NPCF are what I'd recommend for a HW

Nightraven Shade · « **Reply #49 on:** October 29, 2018, 10:16:24 AM »

Thought id make a cluster both are identical using ti5 armor ti extenders with steel holding the main parts flatmotor and tmw drive.

Nightraven Shade · « **Reply #50 on:** November 05, 2018, 05:07:01 PM »

A couple new bots for orc wars first is a dual storm front hinge flipper and second is a dual flatmotor powered drum spinner.

Nightraven Shade · « **Reply #51 on:** January 22, 2019, 07:06:50 PM »

just a couple new bots first is a 4wd npfc with a large vdma top panel alu flipper and 10mm pl chassis armor. second is a vert version of my drum using 10mm pl armor and a perm 4 large typhoon tooth disk.

Naryar · « **Reply #52 on:** January 23, 2019, 05:29:50 AM »

those wedgelets are not flush with each other

Nightraven Shade · « **Reply #53 on:** January 24, 2019, 12:27:22 PM »

Update to my OW3 qualifier, Added front armor reduced amount of wedglets added a dedicated self righter and made a smaller drum but with small typoons. 799KG pl10 with a small burst for self righter and a perm for drum twmr2 drive for tracks.

Naryar · « **Reply #54 on:** January 25, 2019, 09:17:20 AM »

Beginning of a flame war cleaned. Back on topic, please.

The bot looks okay. I can't say i'm a fan of the color however. Plastic 10 seems a bit overkill for something well-protected like that.

Nightraven Shade · « **Reply #55 on:** April 02, 2019, 08:49:18 PM »

so a couple of new bots bit different to what i usually build and a semi old one

superbomb122 · « **Reply #56 on:** April 02, 2019, 09:41:37 PM »

Quote from: Nightraven Shade on April 02, 2019, 08:49:18 PM

so a couple of new bots bit different to what i usually build and a semi old one

[ Quoting of attachment images from other messages is not allowed ] [ Quoting of attachment images from other messages is not allowed ] [ Quoting of attachment images from other messages is not allowed ]

First is pretty good, though I'd do the weapon frame a little different. That straight extender going right across is weird.
Second is alright , although the axe support is kind of garish. Drop it to one or too colors and see if you can get a better shape.
Third is solid, but the weapon support should either be one color or have a better two tone. Those guards on the tracks also just look out of place.

Nightraven Shade · « **Reply #57 on:** April 03, 2019, 09:55:42 PM »

newest flipper/lifter

Gulden · « **Reply #58 on:** April 03, 2019, 11:54:04 PM »

While the chassis is fine, the flipper itself strikes me as odd. Is it just the two sticks or are they attached to the wedges somehow?

Nightraven Shade · « **Reply #59 on:** April 04, 2019, 07:42:44 AM »

It's just lifter arms in the middle of the bot so slightly odd design but will reach anything on the wedges with the wedgelets.