Author Topic: J24's DSL Showcase (Read 29761 times)

G.K. · « **Reply #100 on:** July 23, 2010, 09:09:42 AM »

It would be invertible with Technos.

FOTEPX · « **Reply #101 on:** July 23, 2010, 09:13:13 AM »

No offense, but my LW FS had close to that amount of weapons.

Badnik96 · « **Reply #102 on:** July 23, 2010, 09:13:36 AM »

Quote from: J24 on July 23, 2010, 08:39:12 AM

Right, I made a face spinner, this ones called Red,
(Image removed from quote.)
Pretty good if you ask me, but there is one problem
(Image removed from quote.)

Get rid of the middle spinner and use Techno Destructo wheels. Then lengthen the bottom wedges and take off the top ones. Then it should be a MW. If not then downgrade the armor.

Somebody · « **Reply #103 on:** July 23, 2010, 09:25:52 AM »

Or build it waaaay up into a heavyweight. Always build to the weight limit of the weight class you want it to be in.

J24 · « **Reply #104 on:** July 23, 2010, 10:17:00 AM »

also, my next bot, Orange, will be a Sit and Spin, so some tips for that type of bot please?

Badnik96 · « **Reply #105 on:** July 23, 2010, 10:18:04 AM »

You can't make a bot named Orange, Craaig has that name.

Pwnator · « **Reply #106 on:** July 23, 2010, 10:23:14 AM »

Yes, he can. It's just a name. He can name a bot whatever he wants. :P

J24 · « **Reply #107 on:** July 23, 2010, 10:34:21 AM »

I Decided before i read those two posts that amber would be a better name anyway, so im calling it amber

martymidget · « **Reply #108 on:** July 23, 2010, 10:50:48 AM »

Quote from: Badnik96 on July 23, 2010, 10:18:04 AM

You can't make a bot named Orange, Craaig has that name.

I have a spin cycle, and a mouldy cheese. I hear theres other bots with those names too :P

Whats the armour on amber? I'm no expert on SnS (never built one, because I dont liek them :P *prepares for being shot by Somebody*).

J24 · « **Reply #109 on:** July 23, 2010, 11:25:13 AM »

amber is not actually made yet, but when he is ill post a pic

NFX · « **Reply #110 on:** July 23, 2010, 11:36:20 AM »

SnS questions should be delivered to Somebody for the most part. I have a LW SnS in my showcase, but mine could stand to be better.

Also, a little trick you can do with the NPC Right/Left motors, you can mount them halfway outside the chassis, which reduces chassis size, and thus weight, but also offers protection of the chassis, as anything attached to the baseplate is indestructible. Try moving them around, and you'll see what I mean.

J24 · « **Reply #111 on:** July 23, 2010, 12:01:47 PM »

right, my sit and spinner's failing miserably, so i'll get back to it when Somebody can help
any ideas for yellow? (can you see where this is going?)

Somebody · « **Reply #112 on:** July 23, 2010, 04:31:14 PM »

Hey sup. I am here for questions.

J24 · « **Reply #113 on:** July 23, 2010, 04:57:27 PM »

okay, how do i make a good sit and spinner?

Somebody · « **Reply #114 on:** July 23, 2010, 09:06:55 PM »

A bit vague XD. Build one and I'll take a look.

Note: Putting the weapons on flails makes them better.

If I get the time I will send you two of my better SnS

SKBT · « **Reply #115 on:** July 23, 2010, 09:21:56 PM »

General SNS rules: smallest possible chasis, fast drive (NPC Fast or E-tek with technos), durable weapons (hammers), make sure you have enough battery power

Somebody · « **Reply #116 on:** July 23, 2010, 09:27:33 PM »

https://gametechmods.com/uploads/files/SnS for J24.rar

Have some SnS ^_^

These Are Shoop and Whoop. Both on my ELBITE Team. Look them over because they are some of the best you will find. Shoop is SnSnS 7. I newer version of the one in Clash Cubes 3. Its called an SnS/HS Hybrid. It puts horizontal spinning weapons on the end of the bars to spin faster. Notice how things are slanted to defend motors, the wheels are slanted for a better turning speed, and it uses the Steel 40cm Skirts side attachment points, for nearly impenetrable extender work.

Whoop is Satanic Syclone 3. It also uses the angled motors and steel 40cm sheets. It however has flails for its weapons. The flails allow the weapons to scrap along the chassis and to not stop all of the motion of the robot. It also has titanium half sheets on the chassis for stability. It also has aluminum 40cm skirts to protect the vulnerable flails.

Feel free to enjoy for everyone ^_^

J24 · « **Reply #117 on:** July 24, 2010, 03:11:31 AM »

Thanks somebody ill look at them and get to work making amber
Edit:

J24 · « **Reply #118 on:** July 24, 2010, 07:24:24 AM »

Sorry about the DP, but i just gave hurry house a "proper" test against wrecktangle, and look at this!

SteveM4 · « **Reply #119 on:** July 24, 2010, 07:42:15 AM »

Nice

i'll try that with Cataclysm and see what happens!