Author Topic: Doomkiller's Razor-Filled Bots (Read 55547 times)

Doomkiller · « **Reply #120 on:** June 08, 2009, 07:17:21 AM »

Quote from: Somebody;43025

Well they should work fine. Try them out, and if they don't work, switch them. If they do work, try to upgrade everything until you are at the weight limit.

it is at the weight limit
SHW multi bot=600kgs per bot 50:50 ratio

somestrangeguy · « **Reply #121 on:** June 08, 2009, 08:18:15 AM »

Well in that case, if you are going to enter 2 of the same bot, you need to take 1.2 kgs off that.

Doomkiller · « **Reply #122 on:** June 10, 2009, 07:21:22 AM »

new bot
mw flipper Going, Going, Gone!

1 mm tite
gets under every thing including second setnitial and critical emergency but actually doesn't flip anything

Naryar · « **Reply #123 on:** June 10, 2009, 07:41:14 AM »

Not bad.

All these DSL bars and attachments are pointless however.

And get a large JX.

EDIT: and you can just keep with say 3 battlepacks and 2 ants rather than overloading the thing with ant batts...

JoeBlo · « **Reply #124 on:** June 10, 2009, 07:56:54 AM »

quite a nice looking bot.... but what has me more interested is the background or your bot lab ?? its not one of my themes lol where did it come from ?

Edit: never mind just figured out its an edited image *slaps face*

Doomkiller · « **Reply #125 on:** June 12, 2009, 11:29:51 PM »

JoeBlo is hiting himself? OOOo let me join lol
possible MB for clash cube 2 unless i built something better

im gona fool around with TTM weapons to see whats best.

EDIT: for some reason decoy's wedges go through the floor> can anyone help me with that?

somestrangeguy · « **Reply #126 on:** June 13, 2009, 08:39:59 AM »

Quote from: Doomkiller;43943

EDIT: for some reason decoy's wedges go through the floor> can anyone help me with that?

The angle is too steep, has happened to me before.

Doomkiller · « **Reply #127 on:** June 16, 2009, 06:33:57 AM »

It actually wasnt the angle, it was the skirt collision mesh. it went screwy
fixed it before i sent it to joeblo
update on GGG

3 mm tite
havent skinned it yet

Naryar · « **Reply #128 on:** June 16, 2009, 06:52:19 AM »

4 battlepacks will save weight.

Doomkiller · « **Reply #129 on:** June 17, 2009, 06:36:53 AM »

Ur right Naryar. I calculated the needed amps wrong before. But then again flippers arnt my thing, nether shell spinners......
update on Under strike

1 mm tite.
who likes my new avatar? My cousin made that for me :)

Pwnator · « **Reply #130 on:** June 17, 2009, 06:40:57 AM »

Sweet avatar, but the bot isn't quite as sweet.

You have to protect the bursts, because once a quick rammer goes up your wedge, it will hit your motors first before they fire back. It's better if you keep them inside.

Doomkiller · « **Reply #131 on:** June 17, 2009, 06:47:26 AM »

possibaly, ill go test it now and if that happens i will change it

Naryar · « **Reply #132 on:** June 17, 2009, 06:53:01 AM »

Your bursts are too high for popup weapons anyways.

Doomkiller · « **Reply #133 on:** June 17, 2009, 06:59:50 AM »

Doesnt matter. got absolutly smashed by raving mad. Back to the drawing board

Doomkiller · « **Reply #134 on:** June 18, 2009, 04:26:39 AM »

dp
new bot Shadow ninja

juggler. just trying something new, though i have a feeling the motors may be 2 exposed
untested, 1 mm tite

Pwnator · « **Reply #135 on:** June 18, 2009, 04:30:38 AM »

The motors should be closer together, and the DS Tooth is getting in the way of the beater bars. Attach the bars in an upright position instead.

Any lucky bot can also hit those very exposed plastic extenders. Attach the motors directly instead. You can also turn it into a FS if you feel like it.

Naryar · « **Reply #136 on:** June 18, 2009, 04:43:18 AM »

Poorly cloned Hazcon.

And Pwnator is, once again, right.

Doomkiller · « **Reply #137 on:** June 18, 2009, 04:47:54 AM »

tested it. motor got knocked off... i had a feeling they might and are ur thinking i cloned HC or something else?

Weirdo · « **Reply #138 on:** June 18, 2009, 12:46:27 PM »

When you're inexperianced at building, its ok to clone other bots. It allows you to get a feel to what its like to build decent bots and learn some of the techniques used. When you become a better builder though, thats when cloning is frowned apon.

Doomkiller · « **Reply #139 on:** June 20, 2009, 01:34:13 AM »

upgrade on understrike

bit better than v2, stronger burst motor though bit slower and 1 mm plastic. And yes, i know its a bit unrealistic