Author Topic: Badnik's DSL Badniks (Read 85453 times)

Badnik96 · « **on:** October 10, 2009, 04:36:14 PM »

So I've bee on the forums for 2 months now, and I've seen a lot of showcases, from the good to the bad. now I want to add to the "Good" bot selection with my bots.

First up is Bots Like This, a Lw Juggler.

Next is a LW SNS, Dizzy Dragon,

a MW Flipper, Elevator,

A HS that has defeated many online opponents, Fear Ripper V4,

A very fast spinner, Hellcopter,

A pretty decent HS, Mini Moo,

A popup called Orange Burst that started life as Spitfire,

A FS that can KO Flaming Whizzer and Heaven's Sawmill, Poker Face 2,

my only HW, Red Reaper 3,

and last but not least, Zantetsuken.

More to be added soon!

Badnik96

roboman2444 · « **Reply #1 on:** October 10, 2009, 04:39:54 PM »

get rid of the angle extenders on red reaper 2.
and on mini moo angle the beater bas 1 notch down or put 1 below the other.

The Ounce · « **Reply #2 on:** October 10, 2009, 05:57:24 PM »

A lot of these bots are overpowered, and aluminum isn't really the best choice for armor. Some of them could use better drive as well. Other than that, they all look decent.

somestrangeguy · « **Reply #3 on:** October 10, 2009, 06:09:13 PM »

A FS that can KO Flaming Whizzer and Heaven's Sawmill, Poker Face 2,

Umm... You're fighting stock bots with a DSL bot????

Minimoo: Weapon seems to go trough the wheels, try to set it higher so that it doesnt.

Evelator: Wasted space. If I remember correctly you dont need to thave that high chassis to attach that motor, the top area oes trough the chassis like extenders. It only needs to be tall enough for the motor you see inside the white supports.

trumpetguy · « **Reply #4 on:** October 10, 2009, 06:42:04 PM »

For me the minimum drive for a MW is Mag.

TriTon · « **Reply #5 on:** October 12, 2009, 07:29:07 PM »

Bots Like This - If you can, try using a TWM drive motors, you may have to take some batts out.

Dizzy Dragon - Use a blue control board. Also, don't you think vlad spikes are kind of heavy for a LW?

Elevator - 13 batts? That's way over powered drop down to at least 7 or 6, and use NPC's, you'll have the weight.

Fear Ripper - Take out the ant batt and 2 reds, then try using irons if you can. Don't use stock parts in DSL.

Helicopter - Take out 3 batts.

Mini Moo - Raise the blade so it doesn't go through the chassis. DSL is realism.

Red Reaper - Take out the stock control board and use multi extenders.

Zantetsuken - Same as Mini Moo.

090901 · « **Reply #6 on:** October 12, 2009, 07:36:25 PM »

Quote from: TriTon;72276

Mini Moo - Raise the blade so it doesn't go through the chassis. DSL is realism.

In real life there could be a slot in the chassis, but the bar needs to be rasied so it doesn't go through the wheels.

Badnik96 · « **Reply #7 on:** October 12, 2009, 07:43:38 PM »

Quote from: TriTon;72276

Bots Like This - If you can, try using a TWM drive motors, you may have to take some batts out.

Dizzy Dragon - Use a blue control board. Also, don't you think vlad spikes are kind of heavy for a LW?

Elevator - 13 batts? That's way over powered drop down to at least 7 or 6, and use NPC's, you'll have the weight.

Fear Ripper - Take out the ant batt and 2 reds, then try using irons if you can. Don't use stock parts in DSL.

Helicopter - Take out 3 batts.

Mini Moo - Raise the blade so it doesn't go through the chassis. DSL is realism.

Red Reaper - Take out the stock control board and use multi extenders.

Zantetsuken - Same as Mini Moo.

weapons can pass thruthe chassis, but not the batteries wheels or motors.

so mini moo will haveto be fixed but zantetsuken is ok.

and tomorrow i will post the updates to some bots and post a few new ones...

JoeBlo · « **Reply #8 on:** October 12, 2009, 07:51:52 PM »

Quote from: TriTon;72276

Elevator - 13 batts? That's way over powered drop down to at least 7 or 6, and use NPC's, you'll have the weight.

actually more battery's = More flipping power

ditch the flipper segment and the heavy skirt and get an aluminium skirt long enough to pass the chassis so that is your wedge rather then the chassis, you could shorten the chassis to do the same thing which would save you weight

you have plenty of space so there is no need for the micro control board, save a kg an go with the blue one then you should be able to upgrade to NPC's

russian roulette · « **Reply #9 on:** October 12, 2009, 08:05:48 PM »

And chassis wedges suck in dsl... That is all.

Naryar · « **Reply #10 on:** October 13, 2009, 05:12:15 AM »

All of your bots are overpowered, excepted Elevator that is -very- underpowered (Get PC625's and reduce the chassis size)

Also Aluminium fails as armor, Steel isn't really good (excepted 5mm steel)

Quote from: JoeBlo;72283

actually more battery's = More flipping power

More amps for being a nitpick. Just why i said to use PC625's on Beta burst bots since you have the height.

Badnik96 · « **Reply #11 on:** December 19, 2009, 11:15:50 AM »

I know it's been a while, but here are my new bots.

6 ants, Can't remember the armor.

2 orange batts, 4 ants, cant remember the armor.

Basically an upgraded Bots Like This. A better version is in Amazing Rage, as Cheese Pizza. 3 ants. Forget the armor.

A possible CC3 entry. Not the one I will use, though. 6 ants. Forget the armor.

I would have entered it in IRL if the wedge didnt fail. Forget the armor.

That's it for now. I will post some more stuff later.

Reier · « **Reply #12 on:** December 19, 2009, 11:21:19 AM »

PNGs!! PNGs!!
Bmps take forever to load man!

Better drive on Nerf and different weapons and it could be a killer SnS.

Thyrus · « **Reply #13 on:** December 19, 2009, 11:22:32 AM »

Avenger reminds me of my most destructive pre-forum HW spinner.

Naryar · « **Reply #14 on:** December 19, 2009, 11:33:59 AM »

ROTA - Nice name. It doesn't needs 6 ants and would most likely be better with 45 kg hammers.

Elevator - Underpowered. You need 190 amps to make this work.

Blue Blaze - It needs stronger drive. It doesn't needs more than a light plow however.

Nerf - Does this really have 6 ants ? You don't need as much anyways - you might get TWM3s as well since they have much more hitpoints than your current motors and it will improve turnspeed.

Avenger - You have the skills to build much better than that.

123savethewhales · « **Reply #15 on:** December 19, 2009, 03:15:46 PM »

ROTA needs no more than 4 ant batteries (I would use 3). That, and you can try using techno destructo wheels on it. For SnS with only 2 side you need all the spin speed you can get to swap away popups and gutrippers. Use a shorter dsl bar if you need the weight.

JoeBlo · « **Reply #16 on:** December 19, 2009, 08:59:33 PM »

RotA - anyone else thinking Haymaker ?

Elevater - try a different battery selection to get full power

they are the only two images that loaded in time for this post :P please use PNG's next time

The Ounce · « **Reply #17 on:** December 19, 2009, 09:05:55 PM »

Quote from: JoeBlo on December 19, 2009, 08:59:33 PM

RotA - anyone else thinking Haymaker ?

You're not the only one XD! I'm not too big a fan of that setup anyway; it's why I think Haymaker sucks. :P

A helpful tip to remember is that any spin motor, doesn't matter if it's a weapon or drive motor, can be powered by only 1 ant (though you might want to add a couple more).

Sparkey98 · « **Reply #18 on:** December 30, 2009, 05:26:08 PM »

hey, I'm working on an AI pack and was wondering, could mini moo be in it? if so can you make a MW and HW for the team to?

Badnik96 · « **Reply #19 on:** December 30, 2009, 05:40:01 PM »

1:Can you AI?
2: I upgraded Mini Moo but the result is not very satisfactory.