Author Topic: I found a new building technique/glitch (Read 7170 times)

Sage · « **Reply #40 on:** April 11, 2009, 09:03:26 PM »

too bad i don't have a working pause button.

And naryar, that video prompted me to build the hammers like final destination and fatal ecnounter. you gonna laugh at those?

System32 · « **Reply #41 on:** April 11, 2009, 09:07:21 PM »

Will they get beat by Sawbots?

tankcat · « **Reply #42 on:** April 11, 2009, 10:44:25 PM »

Quote from: Naryar;33870

HAHAHAHAH

_______________

Anyways here's the thing that i built:

(Image removed from quote.)

Designed to be the prototype of an invertible Sentinel Observer - it sucks because of plastic armor, but i'm going to rebuild it possibly with 6 razors.

Wait, are those motors chained together? If you could show me how you did that, that would be awesome.

Oggie · « **Reply #43 on:** April 11, 2009, 10:52:16 PM »

If I'm right it's 3 extenders set up to make an equilateral triangle. In other words 60 degrees between each of the extenders, using the attachment points on the side.

tankcat · « **Reply #44 on:** April 11, 2009, 11:40:24 PM »

Quote from: Oggie;33880

If I'm right it's 3 extenders set up to make an equilateral triangle. In other words 60 degrees between each of the extenders, using the attachment points on the side.

That'd work too, however I think he's only using 2 extenders somehow... the closest I got to that was with a T connector.

Sage · « **Reply #45 on:** April 11, 2009, 11:59:40 PM »

Quote from: tankcat;33883

That'd work too, however I think he's only using 2 extenders somehow... the closest I got to that was with a T connector.

nope thats three.

ianh05 · « **Reply #46 on:** April 12, 2009, 12:01:09 AM »

could you not use the side of the extender coming off the first motor to face the next extender straight down and have them chained that way?

Oggie · « **Reply #47 on:** April 12, 2009, 12:29:29 AM »

Quote from: ianh05;33885

could you not use the side of the extender coming off the first motor to face the next extender straight down and have them chained that way?

[/COLOR]

You can, but they won't stack very well. Usefull if you have problem with the rule of 7, but can be a problem if you want to make it invertible.

ianh05 · « **Reply #48 on:** April 12, 2009, 12:55:32 AM »

the pics i see have extenders coming up then one coming off the end of it, I'm suggesting that they use the side and get the 2nd motor to go down into the first one.

that would allow you to use more weapons (2 weapons on each extender coming from the tribar).

Somebody · « **Reply #49 on:** April 12, 2009, 06:05:40 AM »

Can anybody show me the setup of how to get the motor so close, or make a vid, because I frankly just can't tell how you guys are doing it.

somestrangeguy · « **Reply #50 on:** April 12, 2009, 07:51:19 AM »

@SB: There is already a vid on page 3.

Here is what I made, I decided to go straight for 2 motors. Its a little shaky but it doesnt start gyrodancing until it has lost most of the weapons. Also this is very underweight as I was making it a HW, it weights 530.6.
How I put this together?
HPZ-tec-> T Extender -> 1 20cm round extender downwards from both ends -> HPZ-tec on both extenders -> Tribars -> Extenders on all ends -> 3 maces/extender on the tribars.
(btw, this is the first time I used maces on a HS)

Battleshot is VS SCv4 Predator, you cant see him in the pic because the final hit threw me away from him so fast that I couldnt get him in the picture.

Battleshot

Naryar · « **Reply #51 on:** April 12, 2009, 08:12:36 AM »

Quote from: Somebody;33897

Can anybody show me the setup of how to get the motor so close, or make a vid, because I frankly just can't tell how you guys are doing it.

YOURE NOT TRYING HARD ENOUGH

__________

SSG there's 5kg to win on your drive setup.

__________

Second try, with the tri extender now.

DSA, everything else is in the pic. (yeah the chassis looks like Spin Cycle i know)

Going to submit that to Starcore for Sentinel Observer SCv4 - after some more tweaking though, and maybe another version, cause it can't self right nor is invertible.

Sage · « **Reply #52 on:** April 12, 2009, 08:24:22 AM »

Naryar- try raising the rads up one more notch... so its 4 high. tell me what happens.

roboman2444 · « **Reply #53 on:** April 12, 2009, 10:48:54 AM »

im making a bot a lot like this. the only prob is i cant get the cb into the nifty. any tips?

System32 · « **Reply #54 on:** April 12, 2009, 11:12:30 AM »

No need, you said you can.

tankcat · « **Reply #55 on:** April 12, 2009, 04:33:35 PM »

Quote from: Somebody;33897

Can anybody show me the setup of how to get the motor so close, or make a vid, because I frankly just can't tell how you guys are doing it.

Here is the video from the previous post, I uploaded it to mediafire: http://www.mediafire.com/download.php?kmkz3umnywh

Also, when using this glitch combined with the effe glitch sometimes even after I go to the garage and back, exit out of the game, etc... the collision boxes for the weapons are still floating out in space where I placed them if I turn it on with f12.

Sage · « **Reply #56 on:** April 12, 2009, 04:41:33 PM »

thats what maces do . try irons.

tankcat · « **Reply #57 on:** April 12, 2009, 06:31:21 PM »

Awesome, I got my bot finished. If anyone is up for a challenge, I'll be in the RA2STOCK hamachi server.

Somebody · « **Reply #58 on:** April 13, 2009, 06:17:53 AM »

That video doesn't work on my comp. can anyone upload it to Youtube?

roboman2444 · « **Reply #59 on:** April 13, 2009, 12:25:37 PM »

is the password for ra2 stock public or do i have to pm someone to get in?