Author Topic: Wolfsbane's supertastic showcase of stuff (Read 26975 times)

Mr. AS · « **Reply #120 on:** June 02, 2012, 02:20:20 PM »

you can build the weapon off of one snapper

NFX · « **Reply #121 on:** June 02, 2012, 02:22:35 PM »

RAD drive is fine for MW HS. But you should be able to get a bunch more weaponry on there if you use only one SnapperII, and tidied up the extender work a little bit. Maces are the preferred medium for HS, largely due to their longevity and protection of the extenders, Irons allow you more reach.

Wolfsbane · « **Reply #122 on:** June 02, 2012, 03:14:35 PM »

I'll try, but i've done some testing with it against stock bbeans ai teams 1-15.

It kills everything effictently, except for these three, where it has troubles. NeglectedVain (NWB clone) Nobody Nose (Same concept, but replaced 12 razors and the ramplates for snowplows for better drive), and I Will Get Shredded. I designed this to have good O and D in exchange for M.

O XXX--
M XX---
D XXXX-

NFX, is that how you would rate it like the bots in your signiture?

I would build it off 1 blue snapper, but then i have problems mounting the drive and armour. Should i ditch the armour for better drive and weapons?

Badnik96 · « **Reply #123 on:** June 02, 2012, 06:44:38 PM »

What do those letters stand for?

Wolfsbane · « **Reply #124 on:** June 02, 2012, 06:48:39 PM »

O means Offence
M means Mobility
D meand Defence

it's from a building tutorial on the wiki, and NFX rates the bots in his signiture with this method.

Virus Bomb · « **Reply #125 on:** June 02, 2012, 06:55:14 PM »

MW BBEANS bots aren't really that good outside of a couple bots. Try the MWs from PYS AI, Inf's AI pack and SCv4.

Bot: You should try to get it invertible if it isn't already. RAD drive is perfectly fine on MW HSes, but if you want to try stronger drive such as redbirds or zteks then go ahead. Also there's nothing wrong with using razors on this although razor HSes in the MW class usually have stronger drive, more armor, or more weapons. Razors are better at taking out popups than both irons and maces but there's nothing stopping you from switching weapons.

090901 · « **Reply #126 on:** June 02, 2012, 10:35:59 PM »

You do know those BBEANS MW bots you are fighting are from 2006?

Wolfsbane · « **Reply #127 on:** June 19, 2012, 05:45:40 PM »

haven't updated but i bult a hybrid wammer/side hammer, an hw popup, mw popup and updated ai to scv3

DSA, 2 blacks, and a lot of glitching. Comments?

Mr. AS · « **Reply #128 on:** June 19, 2012, 05:55:01 PM »

less empty space

Naryar · « **Reply #129 on:** June 19, 2012, 07:46:42 PM »

The front of the bot is pretty good, but when you look at the back... UGH. That extender work is just horrible.

Simplify it, and no need for srimechs on invertible non-wedged bots. Besides, the arm is far too long to work as a srimech.

ty4er · « **Reply #130 on:** June 19, 2012, 10:16:42 PM »

so much wasted weight on the back

and move the inner most razors from the side hammer to the end of it

Wolfsbane · « **Reply #131 on:** July 10, 2012, 07:11:26 PM »

My laptop with all my games went dead, and my charger is b0rken. In the meantime, can someone teach me how to build a 36HS?

090901 · « **Reply #132 on:** July 13, 2012, 06:17:57 AM »

Only tutorial I ever remember someone posting:

Quote from: Sage on April 03, 2010, 05:13:32 PM

Step-by-step on how I built Black and Blue (requested by Gazea2).

Low quality because it was a big video. If you blow it up in Media Player you can see whats going on, even if it's a little fuzzy.

Wolfsbane · « **Reply #133 on:** July 21, 2012, 03:16:34 PM »

I have created my very first (somewhat) effective HW popup.

everyone, meet Slipstream

DSA, 10 razors, 3 blacks. The reason for grannies is that rubbers glitched out, and it would be underweight with shinies. Comments? Improvements? Dead bird my cat caught-on-a-stick?

Badnik96 · « **Reply #134 on:** July 21, 2012, 03:22:59 PM »

The way the razors are attached is horrible, rotate them 90 degrees

Also if you used shinies you could add a pair of bunny ears like R4 has.

Fracture · « **Reply #135 on:** July 21, 2012, 03:27:09 PM »

First off, the chassis isn't completely airtight, but of course that's not a big problem. The wedge DDTs should face the other way; wider wedges are often preferable. Also, the extenders off the weapon DDTs should be rotated so that their side attachments face sideways rather than backward. This way all the razors get some action. For the wheels, just stick with Shinies. You retain invertibility and gain 24 kg for casters, blades on the wedge extenders, etc.. Generic, but looks like it could take on some tough enemies!

Jonzu95 · « **Reply #136 on:** July 21, 2012, 03:29:27 PM »

I love it

NFX · « **Reply #137 on:** July 21, 2012, 03:32:27 PM »

Use rubber wheels. If they glitch, simply remove the motors and reattach them. You should also rotate the weapon extenders by 90 degrees so all the weapons hit at the same time. Something else you could do is turn the wedge DDT's around, so you get the wedges further apart, making it easier to get underneath your opponents. Apart from stacking the blacks together and shrinking up the chassis slightly, there's not too much else I think you could do, apart from adding more weaponry. It'll be kinda generic, but very effective.

Naryar · « **Reply #138 on:** July 22, 2012, 03:37:32 AM »

It's okay. Use shinies.

090901 · « **Reply #139 on:** July 22, 2012, 04:59:20 AM »

Looks good.