Text Only | Text with Attachments

gametechmods

Robot Arena => Showcases => Stock Showcases => Topic started by: ty4er on December 18, 2010, 07:17:06 AM

Title: ty4er's stockcase
Post by: ty4er on December 18, 2010, 07:17:06 AM
eventually i got bored so i decided to make a stock showcase.
i have had stock for ages and have lots of robots but i will only showcase a few.
all of these i made before i joined here so they are gonna be pretty bad.
anyways here is my first one:
(https://gametechmods.com/uploads/images/62435red star.PNG)
it is a triple hs with hammers and works quite well
Title: Re: ty4er's showcase
Post by: Naryar on December 18, 2010, 07:46:47 AM
Go and have a look at this

http://beetlebros.gametechmods.com/ra2techs.htm (http://beetlebros.gametechmods.com/ra2techs.htm)
Title: Re: ty4er's showcase
Post by: ty4er on December 18, 2010, 07:52:02 AM
will do

and as i said these are all old and i havent made any new robots on stock except from robots in tournaments so all of them i made before i joined here so they are bad i know.
Title: Re: ty4er's showcase
Post by: ty4er on January 04, 2011, 02:10:30 PM
ok after a while i felt like coming back to stock.
well here is nuts 'N' bolts
(https://gametechmods.com/uploads/images/64209nuts n bolts.PNG)
it does quite good as a MW
any ideas?
Title: Re: ty4er's showcase
Post by: Naryar on January 04, 2011, 02:21:48 PM
1 black is enough for 3 spin motors. Remove the Supervolts and small battery packs.

Also, not enough weapons.
Title: Re: ty4er's showcase
Post by: Scorpion on January 04, 2011, 02:28:59 PM
That weapon motor is gonna get killed to death.
You need to have a good look at that link Nar posted before.
Title: Re: ty4er's showcase
Post by: J on January 04, 2011, 02:36:46 PM
TC, you dont need 8 million batteries for a robot.
Pinks are pretty much useless.
Supervolts are decent for MWs
And HWs only really need 1 to 2 Blacks
Title: Re: ty4er's showcase
Post by: ty4er on February 02, 2011, 11:24:02 AM
I got bored of no internet so i came back to stock and made this:
(https://gametechmods.com/uploads/images/93341HS ........................PNG)
Yes, it does have 3 blacks and 5 HP Z-TECHS for weapons.
Title: Re: ty4er's showcase
Post by: Scorpion on February 02, 2011, 11:28:10 AM
Too much power, 3 blacks is OTT, the actual setup is very messy and when you've cleaned up the chassis, you may want to try and effe moar weaponry on there (see Nar's link if you can't remember what effeing is).
Title: Re: ty4er's showcase
Post by: 090901 on February 02, 2011, 11:29:19 AM
huge chassis and it's over powered. You can mount 4 HPz on 1 snapper. Also, get Starcore v2.0.
Title: Re: ty4er's showcase
Post by: J on February 02, 2011, 12:08:39 PM
Quote from: ty4er on February 02, 2011, 11:24:02 AM
(https://gametechmods.com/uploads/images/93341HS ........................PNG)
Your overkilling in Snappers.
If you use the eFFe glitch, you can cut-back on snappers and get more weight to use for the robot.
Add to it, 2 Blacks is plenty of power for what your getting at.
Title: Re: ty4er's showcase
Post by: Reier on February 02, 2011, 03:07:47 PM
Ew don't get 2.0, get like 4.0 or Inf AI. You'll get better wayyyy faster.
Title: Re: ty4er's showcase
Post by: ty4er on March 01, 2011, 02:03:04 PM
bumpzy
I decided to come back to stock for like 5 mins and i made a few antweights from Ianh05's chassis
(I apologize if they have already been made as i'm just a bit too tired to look through to see if they have)
(https://gametechmods.com/uploads/images/62034aw - adbjvkf.PNG)
(https://gametechmods.com/uploads/images/51907aw - fdvdaf.PNG)
(https://gametechmods.com/uploads/images/69766aw - salty water.PNG)
(https://gametechmods.com/uploads/images/25770vdkzd.PNG)
Title: Re: ty4er's showcase
Post by: J on March 01, 2011, 02:09:14 PM
Quote from: ty4er on March 01, 2011, 02:03:04 PM
(https://gametechmods.com/uploads/images/62034aw - adbjvkf.PNG)
AW SFTW <3
Title: Re: ty4er's showcase
Post by: Bubbleman on March 01, 2011, 02:11:41 PM
Quote from: J on March 01, 2011, 02:09:14 PM
Quote from: ty4er on March 01, 2011, 02:03:04 PM
(https://gametechmods.com/uploads/images/62034aw - adbjvkf.PNG)
AW SFTW <3
Nonono, that would require a chewblade, not a sawblade :P
Anyway, i have no experience what so ever with AW's, so i can not offer advice. sorry :(
Title: Re: ty4er's showcase
Post by: J on March 01, 2011, 02:20:27 PM
Quote from: Bubbleman on March 01, 2011, 02:11:41 PM
Quote from: J on March 01, 2011, 02:09:14 PM
Quote from: ty4er on March 01, 2011, 02:03:04 PM
(https://gametechmods.com/uploads/images/62034aw - adbjvkf.PNG)
AW SFTW <3
Nonono, that would require a chewblade, not a sawblade :P Well.. yea
Anyway, i have no experience what so ever with AW's, so i can not offer advice. sorry :(
AWs are fairly easy to editbuild, if your using Ian's chassis.
Just use an angel motor and stick a few razors on it, and your good to go O,o
Title: Re: ty4er's showcase
Post by: ty4er on April 18, 2011, 02:39:10 AM
Time to revive this old thing with this new thing...
(https://gametechmods.com/uploads/images/70014stocknewthing.PNG)
Weighs 249.5 (FFFFFFFFF-) but i can make it properly a LW if i trim the chassis a bit i hope...
And look what it can do :3
(https://gametechmods.com/uploads/images/91781battlesnewthing.PNG)
Only plastic armour but i've had hardly any damage to the chassis yet...
Title: Re: ty4er's showcase
Post by: Squirrel_Monkey on April 18, 2011, 02:41:19 AM
Why not KLONE Child's play?
Title: Re: ty4er's showcase
Post by: Vertigo on April 18, 2011, 02:46:29 AM
Quote from: Squirrel_Monkey on April 18, 2011, 02:41:19 AM
Why not KLONE Child's play?
^This^
Title: Re: ty4er's showcase
Post by: ty4er on April 18, 2011, 02:49:43 AM
Quote from: Squirrel_Monkey on April 18, 2011, 02:41:19 AM
Why not KLONE Child's play?
I honestly don't think i can build anything else good enough :P
and because i can.
And it's not completely a klone...
Title: Re: ty4er's showcase
Post by: Squirrel_Monkey on April 18, 2011, 02:51:10 AM
Yes, it's just less efficient.
Title: Re: ty4er's showcase
Post by: Vertigo on April 18, 2011, 02:53:13 AM
KISS
Title: Re: ty4er's showcase
Post by: ty4er on January 05, 2012, 01:33:54 PM
hi i made a new bot he is awesome killer bot he can beet emergncy when the arena fliped him out lol he is amazing nobody can beat him except hanky panky because he cheted here he is he has steel armor and 4 battleaxes to crush them and then they die xd
(https://gametechmods.com/uploads/images/40201look what i found guys!.png)
hes good right????!!!!!!!!!!??????????!!!!!!!!!!!??????????!!!!!!!!!!!!11!!1!

Title: Re: ty4er's showcase
Post by: Gazea2 on January 05, 2012, 01:36:49 PM
What armour/drive does it have?
Title: Re: ty4er's showcase
Post by: Squirrel_Monkey on January 05, 2012, 01:38:01 PM
Quote from: ty4er on January 05, 2012, 01:33:54 PM
hi i made a new bot he is awesome killer bot he can beet emergncy when the arena fliped him out lol he is amazing nobody can beat him except hanky panky because he cheted here he is he has steel armor and 4 battleaxes to crush them and then they die xd
(https://gametechmods.com/uploads/images/40201look what i found guys!.png)
hes good right????!!!!!!!!!!??????????!!!!!!!!!!!??????????!!!!!!!!!!!!11!!1!

You need to paint it with the Skyrim Logo. It's the perfect shape.
Title: Re: ty4er's showcase
Post by: ty4er on January 05, 2012, 01:40:04 PM
Quote from: ty4er on January 05, 2012, 01:33:54 PM
steel armour
and hpz drive

1 supervolt and 3 pinks :P

Quote from: Squirrel_Monkey on January 05, 2012, 01:38:01 PM
Quote from: ty4er on January 05, 2012, 01:33:54 PM
hi i made a new bot he is awesome killer bot he can beet emergncy when the arena fliped him out lol he is amazing nobody can beat him except hanky panky because he cheted here he is he has steel armor and 4 battleaxes to crush them and then they die xd
(https://gametechmods.com/uploads/images/40201look what i found guys!.png)
hes good right????!!!!!!!!!!??????????!!!!!!!!!!!??????????!!!!!!!!!!!!11!!1!

You need to paint it with the Skyrim Logo. It's the perfect shape.
but how 2 skin????????
i might do it later, wont enter that in the tourney though :P
Title: Re: ty4er's showcase
Post by: Gazea2 on January 05, 2012, 01:42:50 PM
Add more pinks it's not enough
Darn me and my speed reading. I agree with SM, though. That would be awesome if you did skin it like that.

Edit: :O, 2500 posts! Where have they all gone...
Title: Re: ty4er's showcase
Post by: ty4er on February 01, 2012, 10:28:23 AM
help me
(https://gametechmods.com/uploads/images/62388popupplastic.PNG)
(https://gametechmods.com/uploads/images/42180popupplasticinsides.PNG)
plastic atm, do i go with dsa and no casters?

yea it's a true popup
Title: Re: ty4er's stockcase
Post by: Fracture on February 01, 2012, 11:26:27 AM
First of all, the chassis wedge needs to be shallower.

Redbird drive should give you some extra weight if you still want the casters, otherwise keep it as is with DSA and no casters.
Title: Re: ty4er's stockcase
Post by: ty4er on February 01, 2012, 11:48:11 AM
it should be fine without casters with dsa
(https://gametechmods.com/uploads/images/98932popup2.PNG)
that good enough?
Title: Re: ty4er's stockcase
Post by: Fracture on February 01, 2012, 12:30:53 PM
It's pretty much the bare minimum, but yeah, looks good. If you still have extra weight do use it all to make it as shallow as possible though.
Title: Re: ty4er's stockcase
Post by: Gazea2 on February 01, 2012, 01:52:45 PM
Yeah, that looks a bit steep. I'd definitely try to make it shallower which could give you some weight for a caster or two. Not bad, though, considering you hardly play stock.
Title: Re: ty4er's stockcase
Post by: ty4er on February 02, 2012, 11:42:08 AM
aaaaaaaaaaa
(https://gametechmods.com/uploads/images/24962aaaaaaaaa.PNG)

it's 9kg underweight, a total klone of something (i think?) and has plastic.

It's invertible though. and built completely off a snapper.
Title: Re: ty4er's stockcase
Post by: Fracture on February 02, 2012, 11:47:00 AM
It needs DSA and a black to be a clone. :P

A baseplate anchor would trump the SnapperII in this case, for the weight and using less chassis space. May need more extenders though, unless you mount the drive motors statically.
Title: Re: ty4er's stockcase
Post by: ty4er on February 02, 2012, 11:52:43 AM
but then what would i do with the weight :P

iirc dsa goes over the weight. why do i have too much weight in dsl and not enough in here dammit
Title: Re: ty4er's stockcase
Post by: Fracture on February 02, 2012, 11:54:17 AM
Quote from: ty4er on February 02, 2012, 11:52:43 AM
but then what would i do with the weight :P
Get DSA, better battery, add a caster...
Title: Re: ty4er's stockcase
Post by: ty4er on February 02, 2012, 12:00:49 PM
Quote from: Fracture on February 02, 2012, 11:54:17 AM
Quote from: ty4er on February 02, 2012, 11:52:43 AM
but then what would i do with the weight :P
Get DSA, better battery, add a caster...
Does it really need a better battery? i don't really know my stock electric stuff :P
And a caster seems a bit pointless, it has the plow and the weapons help fend them off. and my game doesn't like stacking for some reason (or i just suck at it)
soo it's gonna be dsa unless i desperatly need that battery.
Title: Re: ty4er's stockcase
Post by: Naryar on February 02, 2012, 12:22:53 PM
A Nifty is OK, but it's really going to empty itself soon and at 1:30 after the fight you'll start to lack in electotal.
Title: Re: ty4er's stockcase
Post by: Fracture on February 02, 2012, 01:32:43 PM
Caster could still go on the bottom for popups and when the bot gets flipped in general.

If you watch about 2:55 (1:02 left on the game clock of the last match) into

http://beetlebros.gametechmods.com/bbeans/matches/3/PlayGround_BioQuad.wmv (http://beetlebros.gametechmods.com/bbeans/matches/3/PlayGround_BioQuad.wmv)
you can see how much RAD motors slow down after about a minute.
Title: Re: ty4er's stockcase
Post by: ty4er on June 04, 2012, 02:03:15 PM
yay stock time
(https://gametechmods.com/uploads/images/80043yay stock.PNG)
243.6 with dsa, probably my riws4 entry unless i come up with something else. i had a little help stacking the cb into a nifty from gaz because i cant stack for crap :P

also expect a 36hs soon
Title: Re: ty4er's stockcase
Post by: Gazea2 on June 04, 2012, 02:07:08 PM
LITTLE? I trimmed the chassis for you. :P
Looks good. Does it havok when turning?
Title: Re: ty4er's stockcase
Post by: ty4er on June 04, 2012, 02:07:50 PM
i already had it trimmed though :P

and it does havok in the test arena but i havent tested anywhere else
Title: Re: ty4er's stockcase
Post by: NFX on June 04, 2012, 02:15:52 PM
Nicely built. If you use both ends of the SnapperII, it seems to havok quite a lot more than if you only used the secret AP. 100kg of weapons should do alright against most HS bots, but I'd definitely try and get it more stable.
Title: Re: ty4er's stockcase
Post by: ty4er on June 04, 2012, 04:11:20 PM
you know how i said this?
Quote from: ty4er on June 04, 2012, 02:03:15 PM
also expect a 36hs soon
(https://gametechmods.com/uploads/images/10806fuuu2.PNG)
the rule of 7 can go die

i might go back to dsl for a while now
Title: Re: ty4er's stockcase
Post by: NFX on June 04, 2012, 04:18:09 PM
What you could do is have the pair of extenders on the T connector point backwards, and have those hold the second pair of motors. Then you could have another pair of extenders attached like you had for the drive motors, and they could hold the ramplates. =)
Title: Re: ty4er's stockcase
Post by: Badnik96 on June 04, 2012, 04:19:43 PM
man just do a 3-extender setup:

    S2
XT+TX+XT

S2=Snapper2
XT=extender
TX=T Extender

although you could use a third extender instead of a t extender if you want

edit: ninja'd
Title: Re: ty4er's stockcase
Post by: ty4er on June 06, 2012, 08:03:35 AM
now for my stock vs:
(https://gametechmods.com/uploads/images/76560stock vs.PNG)
sacrificial extender at the back because i could. dsa, 248.9. only havoks slightly if it turns too sharply but otherwise its fine :D
Title: Re: ty4er's stockcase
Post by: Wacky Bob on June 06, 2012, 08:11:05 AM
Looks good. What's powering it?
Title: Re: ty4er's stockcase
Post by: ty4er on June 06, 2012, 08:13:26 AM
nifty
Title: Re: ty4er's stockcase
Post by: Gazea2 on June 06, 2012, 09:24:42 AM
You could rotate the Z-tek slightly so that the disk protects the motor and you could attach the 'birds directly to the T-connector. That could reduce the havok.

Edit: Whoops, your stabilisers are on those extenders. Nevermind.
Title: Re: ty4er's stockcase
Post by: Naryar on June 06, 2012, 09:30:29 AM
All these kilos used on the drive extenders...
Title: Re: ty4er's stockcase
Post by: ty4er on June 09, 2012, 07:32:12 PM
well turns out it havoks a bit more than i thought

anyway i tried kloning and ended up with a fail wedge killer:
(https://gametechmods.com/uploads/images/88717failpoker.PNG)
dsa, 2 pinks and all that. gaz helped me stack again :P
Title: Re: ty4er's stockcase
Post by: Gazea2 on June 09, 2012, 07:35:28 PM
(and the chassis :P)
That stack was a bit of a pain. >.>
Anyway, looks alright. The front might get chewed up by HS and you could use a longer piston.
Title: Re: ty4er's stockcase
Post by: Clickbeetle on June 13, 2012, 10:25:32 PM
Yeah, wedge killers don't really work because popups can kill your bottom faster than you can kill their top.
 
Could be a decent Insectoid-esque thing if you don't angle the piston down though.
Title: Re: ty4er's stockcase
Post by: ty4er on June 29, 2012, 05:53:18 AM
(https://gametechmods.com/uploads/images/2850stock popup.PNG)
I felt like making a popup. DSA, 3 blacks and around 11 razors. wedges are pretty good from the quick test i had
Title: Re: ty4er's stockcase
Post by: Gazea2 on June 29, 2012, 05:58:58 AM
Well done on stacking the blacks
I totally didn't stack them. :P
Do the irons and razor do much?
Title: Re: ty4er's stockcase
Post by: ty4er on July 31, 2012, 08:59:37 AM
yes they do help a bit

NEW BOT
(https://gametechmods.com/uploads/images/97004wammer.PNG)
gaz helped me stack again :P plastic armour. i was pretty happy with it until i noticed something:
(https://gametechmods.com/uploads/images/91347damn agod.PNG)
that has got to be the tiniest bit of agod i have ever had
Title: Re: ty4er's stockcase
Post by: Gazea2 on July 31, 2012, 09:01:30 AM
Hahaha agod follows you into stock too. Bit skeptical of the plastic but I suppose dat wedge armour will fix it...
Wedge armour is the way forward.
Title: Re: ty4er's stockcase
Post by: Mr. AS on July 31, 2012, 09:36:32 AM
it looks steep
Title: Re: ty4er's stockcase
Post by: Clickbeetle on July 31, 2012, 05:39:25 PM
Fantastic design.  It's like a LW Event Horizon.  :mrgreen:
 
I would ditch the small wedge front armor though, which might be reducing the wedge's wedginess and HS can still hit your sides anyway, and give it a lower, shallower chassis wedge instead.  You can replace the Nifty with 2 pinks to make the chassis extra-flat.  Also needs DSA, even with the wedge armor.
Title: Re: ty4er's stockcase
Post by: Naryar on August 01, 2012, 05:00:55 AM
I love it !
Title: Re: ty4er's stockcase
Post by: madman3 on August 01, 2012, 09:40:02 AM
There's no point to having it so small, HS will probably rape it. Enlarge the front end so you can make you wedge thinner and try and get a chassis mounted drive setup, because there's no benefit to not having one on a LW as you really don't need more weapons or anything.
Title: Re: ty4er's stockcase
Post by: Gazea2 on August 01, 2012, 10:09:27 AM
I disagree (that's twice in two days haha)... From testing, the weight saved from bursted drive allows you to provide protection and enough weapons. TBH I think he did slightly overkill on the weapons. With a re-build it can be shallower and more protected.
Title: Re: ty4er's stockcase
Post by: madman3 on August 01, 2012, 10:19:09 AM
Quote from: Gazea2 on August 01, 2012, 10:09:27 AM
I disagree (that's twice in two days haha)... From testing, the weight saved from bursted drive allows you to provide protection and enough weapons. TBH I think he did slightly overkill on the weapons. With a re-build it can be shallower and more protected.
Protection for your front isn't worth it if your wheels are easy to take out due to being too compactly placed.
Title: Re: ty4er's stockcase
Post by: ty4er on August 01, 2012, 04:28:51 PM
With that advice, i've finished it:
(https://gametechmods.com/uploads/images/12855wammer2.PNG)
dsa and 2 pinks. needless to say gaz helped me stack :P
Title: Re: ty4er's stockcase
Post by: Gazea2 on August 01, 2012, 04:34:37 PM
Dat stack... such a pain. For those that want to know, the chassis is pretty tight and I had to stack a CB INSIDE a snapper. Fun.

How's the wedge? I know that the snapper is pretty far back...
Title: Re: ty4er's stockcase
Post by: martymidget on August 01, 2012, 05:03:27 PM
Quote from: Gazea2 on August 01, 2012, 04:34:37 PM
Dat stack... such a pain. For those that want to know, the chassis is pretty tight and I had to stack a CB INSIDE a snapper. Fun.

Really? CB inside a snapper? Easy peasy. And that's coming from me :P
Title: Re: ty4er's stockcase
Post by: Gazea2 on August 01, 2012, 05:21:21 PM
Quote from: martymidget on August 01, 2012, 05:03:27 PM
Quote from: Gazea2 on August 01, 2012, 04:34:37 PM
Dat stack... such a pain. For those that want to know, the chassis is pretty tight and I had to stack a CB INSIDE a snapper. Fun.

Really? CB inside a snapper? Easy peasy. And that's coming from me :P

Oh shh... The chassis is really tight. :P
Title: Re: ty4er's stockcase
Post by: Mr. AS on August 01, 2012, 05:24:08 PM
yep stacks tedn to be more difficult based on how airtight your chassis is, i normally leave a bit of wiggle room when i know i need to stack some stuff

it is a nice build even if you didnt do all of it yourself
Title: Re: ty4er's stockcase
Post by: madman3 on August 01, 2012, 05:28:03 PM
I still can't stack blacks in less than an hour and I've never stacked a CB in a nifty :P All I really ever stack is air tanks :P
Title: Re: ty4er's stockcase
Post by: ty4er on August 19, 2012, 02:56:24 PM
i decided to try stock again with a hs/rammer hybrid
(https://gametechmods.com/uploads/images/16245stock bot.PNG)
1 black, rads powering the tribars and a pretty airtight chassis

only problem is, the z-teks' collision prevents me from ramming easily. still driveable though with no havoks

Title: Re: ty4er's stockcase
Post by: 090901 on August 19, 2012, 03:09:13 PM
Insides pls
Title: Re: ty4er's stockcase
Post by: ty4er on August 19, 2012, 03:24:29 PM
(https://gametechmods.com/uploads/images/1934insides stock bot.PNG)
Title: Re: ty4er's stockcase
Post by: 090901 on August 19, 2012, 03:25:36 PM
I think you can get away with just one blue snapper for this.
Title: Re: ty4er's stockcase
Post by: Wacky Bob on August 19, 2012, 03:38:47 PM
If you took off the 20cms near the wedges and dropped 4 kgs somewhere else, you could swap the maces for axes to give it deweaponing capabilities.
Title: Re: ty4er's stockcase
Post by: NFX on August 19, 2012, 04:14:01 PM
Quote from: Wacky Bob on August 19, 2012, 03:38:47 PM
If you took off the 20cms near the wedges and dropped 4 kgs somewhere else, you could swap the maces for axes to give it deweaponing capabilities.
I thought Axes and Maces had the same HP, but Maces were lighter and had no normals.
 
And I'm pretty sure a one-snapper setup is possible. T connectors might help, but the trouble would be making the wedges wide enough.
Title: Re: ty4er's stockcase
Post by: 09090901 on August 19, 2012, 04:20:11 PM
attaching your wedges statically would probably help. Non static wedges don't work well and attaching your drive motors to the same extender can't help. Though the wedges are so long it probably doesn't matter that much.
Title: Re: ty4er's stockcase
Post by: Gazea2 on August 19, 2012, 05:06:29 PM
Quote from: NFX on August 19, 2012, 04:14:01 PM
Quote from: Wacky Bob on August 19, 2012, 03:38:47 PM
If you took off the 20cms near the wedges and dropped 4 kgs somewhere else, you could swap the maces for axes to give it deweaponing capabilities.
I thought Axes and Maces had the same HP, but Maces were lighter and had no normals.

Yeah, I think you're right.
ANYWAY, YOU'RE WELCOME ON THE STACK TY. AGAIN.
I like the setup, but it should be possible with one snapper as the others have said. Non static wedges also make me cry. :(
Title: Re: ty4er's stockcase
Post by: Mr. AS on August 19, 2012, 06:21:24 PM
Quote from: NFX on August 19, 2012, 04:14:01 PM
Quote from: Wacky Bob on August 19, 2012, 03:38:47 PM
If you took off the 20cms near the wedges and dropped 4 kgs somewhere else, you could swap the maces for axes to give it deweaponing capabilities.
I thought Axes and Maces had the same HP, but Maces were lighter and had no normals.
axes are 12kg, have single sided normals but have 0.9 concussion and 0.4 peircing, while maces have no normals, are 0.5 peicing and 0.5 concussion and 10 kg, yes both have 1000 hp and 20 fracture, his choice
Title: Re: ty4er's stockcase
Post by: ty4er on August 21, 2012, 10:00:12 AM
(https://gametechmods.com/uploads/images/36727dual mace hs.PNG)
249.0, dsa, 1 nifty (with a cb stacked into it that i did without gaz :P) and rads powering the drive and weapons.

it can actually turn though, not sure if i should enter it into riws4 because sm it takes 1-2 seconds to get to its wheels.
Title: Re: ty4er's stockcase
Post by: Gazea2 on August 21, 2012, 10:03:13 AM
Quote from: ty4er on August 21, 2012, 10:00:12 AM
1 nifty (with a cb stacked into it that i did without gaz :P)

<333
Love the bot. Is it invertible?
Title: Re: ty4er's stockcase
Post by: ty4er on August 21, 2012, 10:07:28 AM
yes it is invertible
Title: Re: ty4er's stockcase
Post by: NFX on August 21, 2012, 10:11:29 AM
Looking very good. I'd consider swapping for Irons for a bit of extra reach. Also, how far over the corners of the machine do the casters extend?
Title: Re: ty4er's stockcase
Post by: ty4er on August 21, 2012, 10:16:29 AM
i remember inf saying that maces were better than irons, plus it looks like there is enough reach at the moment but i can try it with irons.

and just under half of the caster goes off the chassis
Title: Re: ty4er's stockcase
Post by: Virus Bomb on August 21, 2012, 11:19:19 AM
irons usually work better than maces when the weapons are attached directly to the tribar.


bot looks nice
Title: Re: ty4er's stockcase
Post by: Mr. AS on August 21, 2012, 11:33:11 AM
generally maces are better against other hs and irons are better against everything else

but yes irons are probably better for grabbychewy hs because they have mainly piercing damage and heyre longer
Title: Re: ty4er's stockcase
Post by: ty4er on October 30, 2012, 03:22:05 PM
another hs in stock woopee
(https://gametechmods.com/uploads/images/1216hs.PNG)
dsa, 1 black. i think i screwed up somewhere with the setup, atm i have an extender with 2 t connectors under it. gives perfect height though
Title: Re: ty4er's stockcase
Post by: Mr. AS on October 30, 2012, 03:31:43 PM
just get 18 bearclaws on there then we can call it a day

6 extenders per tribar, in a setup similar to restocked tornado v1 or s_m's (ghey) 18hs

downgrade stuff or find a better snapper/extender setup if you have to
Title: Re: ty4er's stockcase
Post by: ty4er on October 30, 2012, 03:34:58 PM
Quote from: Mr. AwesumSauce on October 30, 2012, 03:31:43 PM
or find a better snapper/extender setup if you have to
thats what i need help with though

but yeah i should be able to get 18 claws easily enough if the rule of 7 doesnt come up again
Title: Re: ty4er's stockcase
Post by: NFX on October 30, 2012, 03:35:56 PM
It's quite similar to Snap!Happy 6.3, without the plow/razor and with a bit more weaponry. I'm not too sure about razor spinners, they're quite brittle compared to their iron/mace counterparts. Good design, though, well built.
Title: Re: ty4er's stockcase
Post by: ty4er on January 19, 2013, 09:43:46 AM
can someone tell me what i'm doing please
(https://gametechmods.com/uploads/images/85353chalk.PNG)
dsa, slight driving issues, 1 air tank and servo and slightly above average wedges

i wanted to be a cool kid and use a servo ok
Title: Re: ty4er's stockcase
Post by: Pwnator on January 19, 2013, 09:54:41 AM
Nice Reactor clone. Unless the RADs are on the baseplate, you should try to space them out some more.


IIRC what made Reactor so effective was that pretty much everything was on the baseplate. It only turned out to be somewhat average only because of the poor wedges.
Title: Re: ty4er's stockcase
Post by: Mr. AS on January 19, 2013, 10:34:22 AM
pretty exposed sides. you should probably try to put the rads/snapper wedges on the outside so its wider and can extend past the sides of your bot. you also wont have to deal with that V chassis

Quote from: ty4er on January 19, 2013, 09:43:46 AM
i wanted to be a cool kid and use a servo ok
choose one
Title: Re: ty4er's stockcase
Post by: Mecha on January 20, 2013, 04:47:59 PM
Looks awesome.
Title: Re: ty4er's stockcase
Post by: ty4er on March 03, 2013, 05:57:38 PM
i made something
(https://gametechmods.com/uploads/images/4358mwhammer.PNG)
plastic, 3 nifties, hpztek drive
Title: Re: ty4er's stockcase
Post by: Thyrus on March 03, 2013, 05:59:58 PM
needs more redstone
Title: Re: ty4er's stockcase
Post by: Mr. AS on March 03, 2013, 06:06:12 PM
you only need one black/two nifties for this at the most. the side plows and hammer could also be extended by 20 or 40cm, and could be more original too...
Title: Re: ty4er's stockcase
Post by: Sage on March 03, 2013, 06:49:11 PM
Use DSA and swtich the irons to razers. irons are much less effective on hammers (just like popups)
Title: Re: ty4er's stockcase
Post by: ty4er on July 03, 2014, 02:15:09 PM
i did a thing in stock
(https://gametechmods.com/uploads/images/27132XISUPERHAMMERBOT3000IX.png)
dsa, legit blue snapper/nifty/cb stack
Title: Re: ty4er's stockcase
Post by: Sage on July 03, 2014, 02:23:13 PM
can you rotate the irons up a little? to better trap opponents.
Title: Re: ty4er's stockcase
Post by: ty4er on July 03, 2014, 05:39:03 PM
Quote from: Sage on July 03, 2014, 02:23:13 PM
can you rotate the irons up a little? to better trap opponents.
done

aNYWAY THIS BOT TOOK ME 3 HOURS OF REMAKING EVERYTHING JUST FOR IT TO BE SUPER BOUNCY AND USELESS
(https://gametechmods.com/uploads/images/96509suicide.png)
if i put extenders on the back it makes the bot havok

brb killing myself
Title: Re: ty4er's stockcase
Post by: 090901 on July 03, 2014, 10:25:52 PM
It's lovely even though the extenders would just fall right off.
Title: Re: ty4er's stockcase
Post by: ty4er on January 05, 2017, 11:45:36 AM
woooo all the way back on page 6, might as well get my almost-annual stock bot out of the way early this year
(https://gametechmods.com/uploads/images/21766wewwew.png)
plastic and a caster under the big ol 140cm, though i might move it forwards a bit
Title: Re: ty4er's stockcase
Post by: Dreamcast on January 05, 2017, 01:55:43 PM
What are those 20CMs doing in front of the plow?
Title: Re: ty4er's stockcase
Post by: ty4er on January 05, 2017, 01:58:41 PM
Quote from: Dreamcast on January 05, 2017, 01:55:43 PM
What are those 20CMs doing in front of the plow?
had some spare weight, if they can take a hit instead of the plows then it's bretty good
Title: Re: ty4er's stockcase
Post by: 090901 on January 05, 2017, 08:38:04 PM
Quote from: Dreamcast on January 05, 2017, 01:55:43 PM
What are those 20CMs doing in front of the plow?
Well, unless he used a snapper to attach them they shouldn't be there as you can't do that in stock   :laughing
Title: Re: ty4er's stockcase
Post by: Mecha on January 05, 2017, 08:50:53 PM
Quote from: 090901 on January 05, 2017, 08:38:04 PM
Quote from: Dreamcast on January 05, 2017, 01:55:43 PM
What are those 20CMs doing in front of the plow?
Well, unless he used a snapper to attach them they shouldn't be there as you can't do that in stock   :laughing
ra2cf  :rage
Title: Re: ty4er's stockcase
Post by: 09090901 on January 05, 2017, 08:57:36 PM
pretty sure this bot isn't legal anyway considering it breaks the r07 along with what 09 said
Title: Re: ty4er's stockcase
Post by: 090901 on January 05, 2017, 09:05:05 PM
Quote from: Geice on January 05, 2017, 08:57:36 PM
pretty sure this bot isn't legal anyway considering it breaks the r07 along with what 09 said
wtf my bot got rejected for ro7 break
Title: Re: ty4er's stockcase
Post by: ty4er on January 05, 2017, 11:00:41 PM
shhhh guys its too late im not gonna open stock up for another 2 years just accept this and let me have my fun
Title: Re: ty4er's stockcase
Post by: ty4er on May 10, 2017, 04:07:05 PM
gee those 2 years went by fast huh
(https://gametechmods.com/uploads/images/64464wew.png)
finally managed to get that old bot on a static setup and without the weapons dragging on the floor, plastic and hpz
Text Only | Text with Attachments