gametechmods
Robot Arena => Showcases => Stock Showcases => Topic started by: swin100 on October 07, 2010, 01:44:51 PM
-
(https://gametechmods.com/uploads/images/65093screenshot_33.png)
(https://gametechmods.com/uploads/images/2465screenshot_38.png)
(https://gametechmods.com/uploads/images/32471screenshot_43.png)
(https://gametechmods.com/uploads/images/90677screenshot_46.png)
i was told to do a showcase so here it is a juggler called freezeburn5. 123 and 4 were crap ths was my first good jugler. rate and reveiew :D
-
i was told to do a showcase so here it is a juggler called freezeburn5. 123 and 4 were crap ths was my first good jugler. rate and reveiew :D
First of all, the showcase is for all your bots, not just one bot per showcase.
Also;
tighten up the chasis to save as much weight as possible
ALWAYS build as close as possible to the weightlimit
the brackets look like wasted weight to me
Are those wedges on ddts?
And whats the armour?
A bit more info helps us in helping you ;)
-
No, it should be called "swin1100's Showcase"
Anyhow,I'm not Juggler expert so wait for more experienced people.
One question, armour?
Also: http://beetlebros.gametechmods.com/ra2techs.htm (http://beetlebros.gametechmods.com/ra2techs.htm)
@ Scorpi, quoting pics= BIG NO
-
No, it should be called "swin1100's Showcase"
Anyhow,I'm not Juggler expert so wait for more experienced people.
One question, armour?
Also: http://beetlebros.gametechmods.com/ra2techs.htm (http://beetlebros.gametechmods.com/ra2techs.htm)
@ Scorpi, quoting pics= BIG NO
Crap, sorry i got lazy.
And yeah READ THAT LINK.
Infinitely usefull advice waits for you there.
-
the armour is steel. the brackets are there so the victims dont escape and the wedges are on ddts. and the weight is to stop it getting pushed around.
-
Use DSA, which you can read about on that page, make the stoppers wider to fit bots in better.
-
Or move them further back beside the plow, at an angle towards the discs. I would also add some frontal protection against HS's, maybe some Baseplate Anchors and Ramplates.
-
Welcome to the forums!
Not bad for a newbie, I would download Starcore AI pack V1.
-
@S_M: That would be swin100, not swin1100.
-
i have downloaded nearly every pack but i cant put the stuf in the components. [keep in mind i am ten]
-
Or move them further back beside the plow, at an angle towards the discs. I would also add some frontal protection against HS's, maybe some Baseplate Anchors and Ramplates.
Yeah that's a good idea. Definately add some ramplate frontal protection.
Also, you could download DSL from sages signature if you want tougher opponents...
-
DSL isn't the same as stock though. Different rules apply.
-
DSL isn't the same as stock though. Different rules apply.
Yeah I know, but if he's downloaded every mod and he obviously wants a new mod DSL is the easiest to get.
I'm kind of surprised starcore doesn't do a sage and have a ready made starcore pack download in his sig.
-
Here's how you do install those AI packs.
Well obviously you download them of the downloads page or Sage's sig.
Then when its dowloaded you should copy a Robot Arena 2 folder and rename it to whatever mod your using. Then you just extract them into that folder with the WinZip/Rar wizard.
-
Fixed topic name. :D
-
the brackets look like wasted weight to me
The placement could be better (a little further out and back), but actually I can see those being very useful and I'm surprised this is the first juggler I've seen with side trappers.
-
the brackets look like wasted weight to me
The placement could be better (a little further out and back), but actually I can see those being very useful and I'm surprised this is the first juggler I've seen with side trappers.
I know, but i thought plows would be a better alternative for the sides.
Then again I haven't played stock for a while so i can't quite remember.
-
Try to fit an additional black battery. 1 black battery for 6 HPZs will drain a lot.
Not bad for a first bot... and for a 10-year-old :P
-
um guys i have a question on the task manager it says: you have 14 days left to buy robotarena dsl and it has a book icon. should i worry about this! p.s the new forkie beats the crap out the old one.
-
um guys i have a question on the task manager it says: you have 14 days left to buy robotarena dsl and it has a book icon. should i worry about this! p.s the new forkie beats the crap out the old one.
Nah, it's about winrar. You have nothing to worry about that.
-
And the winrar trial never expires :D
-
(https://gametechmods.com/uploads/images/20646biohazard 1.png)
(https://gametechmods.com/uploads/images/59286biohazard 2.png)
this is biohazard
armour:steel
drive :2 hpztek
wheels: rubber
weapons:3 razors,2 wedges,2 pole spikes
edit: batteries stacked supervolts
wep power 1ddt and 2 snappers
-
Use DSA armour
-
Pole spikes are useless. Add a ramplate or something.
here's an example:
(https://gametechmods.com/uploads/images/653ancientcurse.PNG)
-
i have replaced them wiith iron spikes
-
Get rid of the side spikes altogether and put a ramplate on the front, or HS's will eat you. ;)
-
i have replaced them wiith iron spikes
And what exactly are they going to hit on a straight clash ?
NOTHING.
No good builder builds popups with side spikes cause they know they're weight wasted.
I say add front protection.
Edit: There, you see, NFX says it as well and he's no clueless newbie.
-
Also, under/overweight.
-
Also, Remove them pole spikes and make it a MW.
-
If he swaps the Irons for a ramplate, and drops down to DSA, he'll lose a fair chunk of weight. I'm still wondering whether he should lose a Supervolt or not to drop down into the MW class. Normally popups should score fairly quick kills in Stock.
-
Normally popups should score fairly quick kills in Stock.
Not true popups like this one...
-
If he swaps the Irons for a ramplate, and drops down to DSA, he'll lose a fair chunk of weight. I'm still wondering whether he should lose a Supervolt or not to drop down into the MW class. Normally popups should score fairly quick kills in Stock.
If he removes the side spikes, he could reduce the chasis size enough for it to be a MW.
-
Reminds me of one of Jodapower's bots...
Someone please IP check, they look to similar to be coincidental
-
Looks more like Sparkey or Preyetor tbph.
-
Looks more like Sparkey or Preyetor tbph.
This guy is better than both.
-
the robot meatflipper inspiered to make this bot
-
IT'S THE EXACT SAME BOT with heavier armor.
-
Where can I find a picture of this "meatflipper"?
-
It is on the bot exchange, Stock MW.
-
wait its the same bot? tried to make it different but similar if you know what i mean. im sorry if its the same bot. ahh well.